Instrukcja obsługi Hakko FX-888D
Hakko
maszyna do lutowania
FX-888D
Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Hakko FX-888D (15 stron) w kategorii maszyna do lutowania. Ta instrukcja była pomocna dla 9 osób i została oceniona przez 5 użytkowników na średnio 5.0 gwiazdek
Strona 1/15
Cleaning wireHAKKO FX-888D Station
HAKKO FX-8801 Soldering iron
Iron holder (with cleaning sponge)
Instruction Manual
1
1
1
1
1
Instruction Manual
1. PACKING LIST AND PART NAMES
Please check to make sure that all items listed
below are included in the package.
*HAKKO FX-8802 / FX-8803 / FX-8804 (not included) can be connected to HAKKO FX-888D station.
*When using the HAKKO FX-8802/FX-8803/FX-8804, please use it with the applicable iron holder.
HAKKO FX-8801
Cord assembly
Iron holder
Cleaning sponge
Iron holder
base
HAKKO FX-888D Station
Power switch
OFFON
Cleaning wire
Receptacle
Thank you for purchasing the HAKKO FX-888D soldering station.
Please read this manual before operating the HAKKO FX-888D.
Keep this manual readily accessible for reference.
Iron receptacle
This product includes such features as electrically conductive plastic parts and grounding of the unit
as measures to protect the device to be soldered from the effects of static electricity. Be sure to observe
the following instructions:
1. The plastic parts are not insulators, they are conductors. When making repairs or replacing
parts, take sufficient care not to expose live electrical parts or damage insulation materials.
2. Be sure to ground the unit during use.
■ Electrostatic Protection
AC26V 65W
< 2 Ω
< 2 mV
Ceramic heater
3.9 ft. (1.2m)
8.5 in. (217mm) with 1.6D tip
0.10 lb. (46g / 1.62 oz.) with 1.6D tip
Power consumption 70W
● Station
* The temperature was measured using the FG-100 thermometer. * This product is protected against electrostatic discharge.
* Specifications and design are subject to charge without notice.
● HAKKO FX-8801 Soldering iron
Power consumption
Tip to ground resistance
Tip to ground potential
Heating element
Cord
Total length (w/o cord)
Weight (w/o cord)
2. SPECIFICATIONS
Output
Temperature range
Temperature stability
Dimensions (W × H × D)
Weight (w/o cord)
AC26V
120 - 899℉ (50 - 480℃)
±1.8℉ (±1℃) at idle temperature
{When set to 400-899℉ (200-480℃)}
3.9(W) × 4.7(H) × 4.7(D) in.
(100 × 120 × 120 mm)
2.6 lb. (1.2kg)
Specyfikacje produktu
| Marka: | Hakko |
| Kategoria: | maszyna do lutowania |
| Model: | FX-888D |
Potrzebujesz pomocy?
Jeśli potrzebujesz pomocy z Hakko FX-888D, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą
Instrukcje maszyna do lutowania Hakko
2 Października 2024
Instrukcje maszyna do lutowania
- Edsyn
- Fieldmann
- RYOBI
- Portasol
- Silverline
- HQ
- Yato
- Milwaukee
- Craftsman
- Uten
- Stamos
- Weller
- Powerfix
- Ferm
- Trotec
Najnowsze instrukcje dla maszyna do lutowania
11 Stycznia 2025
5 Stycznia 2025
4 Stycznia 2025
4 Stycznia 2025
3 Stycznia 2025
3 Stycznia 2025
1 Stycznia 2025
1 Stycznia 2025
1 Stycznia 2025
1 Stycznia 2025