Instrukcja obsługi Hammer N4400

Hammer Maszyna do piłowania N4400

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Hammer N4400 (44 stron) w kategorii Maszyna do piłowania. Ta instrukcja była pomocna dla 10 osób i została oceniona przez 5.5 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF

Strona 1/44

Keep this manual handy and in good condition for continual reference!

User Manual

Bandsaw

N4400

Dok.ID: 503-15-4502 • Englisch • 2010-10-01

(Translation)

Bandsaw

N4400

For the safety of all personnel, it is necessary to conscientiously study this manual before assembling and

putting the machine into operation. This manual must be kept in good condition, as it is considered to be a

part of the machine. Furthermore, keep the manual handy in the vicinity of the machine so that it is acces-

sible to personnel when they are using, maintaining or repairing the machine.

Attention: Upon arrival, the machine must be inspected immediately. If the machine was damaged during

transport or if parts are missing, a written record of the problems must be submitted to the forwarding

agent and a damage report must be drawn up. Be sure to also notify your supplier straight away.

KR-FELDER-STR 1

A-6060 Hall in Tirol

Tel.: +43 (0) 5223 45 0 90

Fax.: +43 (0) 5223 45 0 99

E-Mail: info@hammer.at

Internet: www.hammer.at

HAMMER A product of the FELDER GROUP



Bandsaw

N4400

Table of contents

Table of Contents

1 General .......................................................................................................... 5

1.1 Explanations of the symbols .............................................................................................5

1.2 Information regarding the manual ....................................................................................5

1.3 Liability and warranty .....................................................................................................6

1.4 Copyright ......................................................................................................................6

1.6 Spare parts ...................................................................................................................6

1.7 Disposal ........................................................................................................................7

2 Safety ............................................................................................................ 8

2.1 Intended use ..................................................................................................................8

2.2 Manual contents ............................................................................................................8

2.3 Making changes and modifications to the machine.............................................................8

2.4 Responsibilities of the operator .........................................................................................9

2.5 What is required of the personnel ....................................................................................9

2.6 Work safety ..................................................................................................................9

2.7 Personal safety .............................................................................................................10

2.8 Hazards arising from the machine ..................................................................................10

2.9 Other risks ..................................................................................................................10

3 Declaration of Conformity ............................................................................. 11

4 Technical data .............................................................................................. 12

4.1 Dimensions and weight .................................................................................................12

4.2 Operation and storage conditions ..................................................................................12

4.3 Electrical connection .....................................................................................................12

4.4 Noise emissions ...........................................................................................................13

4.5 Dust extraction .............................................................................................................14

5. Setting up the machine ................................................................................. 15

5.1 Overview ....................................................................................................................15

5.2 Data plate ...................................................................................................................16

6 Setup and installation ................................................................................... 17

6.1 Safety instructions ........................................................................................................17

6.2 Positioning ..................................................................................................................17

6.2.1 Safety instructions ...................................................................................................18

6.2.2 Setting up the work table .........................................................................................18

7 Operation .................................................................................................... 19

7.1 Safety instructions ........................................................................................................19

7.2 Switching on the machine .............................................................................................20

7.3 Authorised work techniques ...........................................................................................20

7.4 Authorised work techniques ...........................................................................................21

7.4.1 Positioning the 90° end stop on the work table ...........................................................21

7.4.2 Parallel cutting fence ................................................................................................21

7.4.3 Saw blade replacement/tension ................................................................................22

7.4.4 Longitudinal cut along the marked line .......................................................................22

7.4.5 Cutting round work-pieces in the transverse direction ...................................................23

7.4.6 Longitudinal cut of narrow or thin work-pieces with the guide fence ...............................23

Specyfikacje produktu

Marka:	Hammer
Kategoria:	Maszyna do piłowania
Model:	N4400

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Hammer N4400, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą

Twoje imię*

Twój email*

Napisz tutaj swoje pytanie

Instrukcje Maszyna do piłowania Hammer

Hammer N4400 Instrukcja

16 Sierpnia 2024

Instrukcje Maszyna do piłowania

Najnowsze instrukcje dla Maszyna do piłowania

Bavaria By Einhell BHS 66 Instrukcja

3 Kwietnia 2025

Bavaria By Einhell BPS 600 E Instrukcja

3 Kwietnia 2025

Genesis GMCS140 Instrukcja

1 Kwietnia 2025

Makita DPC6430 Instrukcja

1 Kwietnia 2025

Makita DCS4610 Instrukcja

1 Kwietnia 2025

Makita DCS431 Instrukcja

1 Kwietnia 2025

Makita DCS430 Instrukcja

1 Kwietnia 2025

Makita EK6101 Instrukcja

1 Kwietnia 2025

Makita DCS6401 Instrukcja

1 Kwietnia 2025

Kraftronic KT-ST 550 Instrukcja

29 Marca 2025