Instrukcja obsługi Hartke 810XL

Hartke nieskategoryzowany 810XL

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Hartke 810XL (4 stron) w kategorii nieskategoryzowany. Ta instrukcja była pomocna dla 3 osób i została oceniona przez 2 użytkowników na średnio 4.8 gwiazdek

Pobierz PDF

Strona 1/4

8 x10″Stackable

Aluminum Drive Bass Enclosure

Hartke

810XL Introduction and Features

Congratulations on purchasing the 810XL bass enclosure by Hartke! The XL

Series enclosures have been designed to provide excellent tone with a fast

attack, deep low-end and punchy output. The 810XL Features eight 10”, propri-

etary low frequency drivers with specially designed aluminum cones, large voice

coils on Kapton formers, impregnated fabric surrounds, and matched convex

dust covers all mounted in a heavy-duty steel frames. In order to reduce distor-

tion caused by standing waves, and to increase the overall output level, the

810XL enclosure has been designed with four separate chambers, each housing

two 10” drivers. Using heavy-duty plywood construction, covered in rugged car-

pet with recessed jack plate and ergonomic metal handles, the 810XL will pro-

vide reliable performance from gig to gig and venue to venue.

In these pages, you’ll find a detailed description of the features of the 810XL, as

well as a description of its front and rear panels, step-by-step instructions for its

setup and use and full specifications. You’ll also find a warranty card enclosed—

please don’t forget to fill it out and mail it in so that you can receive online tech-

nical support and so we can send you updated information about these and

other Samson products in the future.

We recommend you record your serial number in the space provided below for

future reference.

Serial number:

Date of purchase:

Should your unit ever require servicing, a Return Authorization number (RA)

must be obtained before shipping your unit to Samson. Without this number, the

unit will not be accepted. Please call Samson at 1-800-3SAMSON (1-800-372-

6766) for a Return Authorization number prior to shipping your unit. Please

retain the original packing materials and if possible, return the unit in the original

carton and packing materials.

810XL Features

• 8 x 10 Inch heavy-duty, Aluminum,

Low Frequency drivers

• 3/4" Plywood construction

• Four chamber, sealed enclosure

• Perforated metal speaker grill

• Recessed metal handles

• Stacking corners

• 1/4" Input jack

• Covered in durable carpet

Connecting the 810XL

About Impedance

Before you hook up your speaker cabinet, be sure that you understand a little about

impedance. Impedance is the electronic load that the speaker puts on the power amplifier

and is measured in Ohms.

Here is the tricky, yet simple rule of impedance: When two speakers are wired in "Parallel"

the total impedance is cut in half and

when two speakers are wire in “Series”

the total impedance is the sum of the

speakers individual impedance.

The 810XL impedance is 4 Ohms. So,

when two 810XL’s are connected

together in parallel, the total impedance

is 2 Ohms. The impedance of your

speaker also has an effect on your

amplifier. In general, the lower the

impedance, the more power your ampli-

fier will put out.

IMPORTANT: There is a minimum safe

impedance so be sure to check the

manufacturer’s recommended imped-

ance for your amplifier to avoid any

damage to your amplifier or voiding

your warranty.

Connecting the 810XL to Your Amplifier

The 810XL connections are made via

1/4” phone jack located on the rear

panel jack-plate. Be sure to make your

connection with un-shielded speaker

cable. Connect the Amplifier Output to

the speaker Input on the 810XL’s rear

jackplate.

Har t ke Sys t e ms

Distributed Exclusively by

Samso n Technolo gies Co rp.

Hicksv ille, New York 11802

MOD EL 2000

200 WATTS

= 120 WATTS

= 200 WATTS

CAUTION

TO PREVENT SHOCK, DO NOT OPEN. NO US ER S ERVICE-

ABLE PARTS INS IDE. REFER S ERVICING TO QUALIFIED

SERVICE PERSONNEL. TO PREVENT FIRE OR S HOCK

HAZ ARD, DO NOT EXPOS E TO RAIN OR MOISTURE.

ASSEMBLED IN R.O.K. SERIAL NUMBER

115

~ AC INPUT

115 V/230V 5 0/60 Hz

FUSE

5A/2 50V, 180 W (115 V)

2.5A/2 50V, 450W (230V)

SP EAKER OUTPU TS

ON OFF

HPF

EFFE CT

SENDRETUIRN

Specyfikacje produktu

Marka:	Hartke
Kategoria:	nieskategoryzowany
Model:	810XL
Kolor produktu:	Czarny
Typ kontroli:	Rotary,Touch
Wbudowany wyświetlacz:	Tak
Położenie urządzenia:	Wolnostojący
Wysokość produktu:	850 mm
Szerokość produktu:	600 mm
Głębokość produktu:	625 mm
Waga produktu:	39.6 g
Szerokość opakowania:	640 mm
Wysokość opakowania:	910 mm
Głębokość opakowania:	690 mm
System suszenia:	Kondensacja
Poziom hałasu:	65 dB
Opóźniony start czasomierza:	Tak
Czas cyklu:	150 min
Klasa wydajności energetycznej:	B
Skala efektywności energetycznej:	A++ do D
Sterowanie przez Wi-Fi:	Nie
Kraj pochodzenia:	Słowenia
Typ ładowania:	Od przodu
Zawias drzwiczek:	Prawy
Pojemność znamionowa:	8 kg
Waga wraz z opakowaniem:	42.1 g
Samoczyszczący:	Nie
NFC:	Nie
Roczne zużycie energii:	560.5 kWh
Kategoria suszenia:	B
Dwustronne drzwi:	Nie
Ilość programów suszących:	16
Źródło ciepła:	Prąd elektryczny
Zużycie energii:	4.75 kWh
Programy suszenia:	Mix,Sport,Freshen-up,Delicate/silk,Pillow,Blouse/shirt,Cotton,Iron dry,Cupboard dry
Funkcja Anti-Crease:	Tak
Regulacja poziomu suszenia:	Tak
Liczba poziomów suszenia:	3