Instrukcja obsługi Havis DS-APP-102

Havis Kołyska/stacja dokująca DS-APP-102

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Havis DS-APP-102 (8 stron) w kategorii Kołyska/stacja dokująca. Ta instrukcja była pomocna dla 13 osób i została oceniona przez 7 użytkowników na średnio 4.8 gwiazdek

Pobierz PDF

Strona 1/8

Instructions for

Havis Protective Case

For Apple iPad

www.havis.com

1-800-524-9900

DS-DA-701 for iPad 2/3

DS-DA-702 for iPad 4

DS-DA-704 for iPad Air / Air 2

DS-DA-705 for iPad Air / Air2 / Pro 9.7

Specications

• READ ALL INSTRUCTIONS THOROUGHLY BEFORE BEGINNING INSTALLATION.

Power Supply Input 5V (10 Watt)

Dimensions 11.4” ( 28.9 cm) W x 8.7” ( 22.1 cm ) D x 0.87” ( 2.2 cm ) H

Weight 0.8 lbs ( 0.36 kg )

Operating Environment 0° C to 35° C ( 32° F to 95° F )

Storage Environment -20° C to 45° C ( -4° F to 113° F )

FCC Statement / Declaration of Conformity

This device complies with the requirements of the Code of Federal Regulations listed below:

FCC Title 47 CFR, Part 15 Class foBr a digital device.

Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and

(2) This device must accept any interference received, including interference that may

cause undesired operation.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device,

pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against

harmful interference when the equipment is operated in a commercial environment. This equipment

generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance

with instruction manual, may cause harmful interference to radio communications. Operation of this

equipment in a residential area is likely to cause harmful interference in which case the user will be

required to correct the interference at his own expense.

Charging Your TabletCompatibility Matrix

• #1 Phillips Screwdriver

• Protective Case

(Back and Front pieces)

• Micro-USB Power Cable (1)• #4-20 x 3/8” Plastite Screws (12)

• Rubber Corners/Edge (5)

Parts Included

Tools Required

(Original Instructions)

• Hand Strap (1)

NOTE: The Hand Strap comes pre-attached to the

back of the Protective Case. If the Hand Strap will

not be utilized, remove prior to assembly.

Havis Product Apple iPad Model(s) Compatible

Havis Products

DS-APP-102 All

(2, 3, 4, Air, Air 2, & Pro 9.7)

DS-DA-701

DS-DA-702

DS-DA-704

DS-DA-705

DS-APP-112 Air, Air 2, & Pro 9.7 DS-DA-705

DS-DA-701 iPad 2 & 3 DS-APP-102

DS-DA-702 iPad 4 DS-APP-102

DS-DA-704 Air & Air 2 DS-APP-102

DS-DA-705 Air, Air 2, & Pro 9.7 DS-APP-102

DS-APP-112

PKG-DS-APP-102

(includes DS-APP-102 & DS-DA-701) iPad 2 & 3 n/a

PKG-DS-APP-112

(includes DS-APP-102 & DS-DA-702) iPad 4 n/a

PKG-DS-APP-132

(includes DS-APP-102 & DS-DA-704) Air & Air 2 n/a

PKG-DS-APP-142

(includes DS-APP-112 & DS-DA-705) Air, Air 2 & Pro 9.7 n/a

www.havis.com • 1-800-524-9900 3

Installation

1. Remove Protective Case from packaging and seperate the Back piece

from the Front piece.

2. Insert the connector from the Protective Case into the Apple iPad.

Specyfikacje produktu

Marka:	Havis
Kategoria:	Kołyska/stacja dokująca
Model:	DS-APP-102
Kolor produktu:	Szary
Rodzaj zasilania:	Zapalniczka
Wysokość produktu:	275 mm
Szerokość produktu:	176 mm
Głębokość produktu:	80 mm
Waga produktu:	680 g
Certyfikat środowiskowy (zrównoważonego rozwoju):	RoHS
Bluetooth:	Nie
Kensington Lock:	Tak
Kompatybilność:	iPad 4\niPad air
Kompatybilność marki:	Apple
Typ złącza dokowania:	Apple Lightning
Podstawowy typ urządzenia:	Tablet