Instrukcja obsługi HiKOKI B16RM
Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla HiKOKI B16RM (28 stron) w kategorii Wiertarka. Ta instrukcja była pomocna dla 22 osób i została oceniona przez 11.5 użytkowników na średnio 4.8 gwiazdek
Strona 1/28
Model Drill Press
B 16RM
Hitachi Koki
INSTRUCTION MANUAL AND SAFETY INSTRUCTIONS
improper and unsafe use of this power tool can result in death or serious bodily injury!
This manual contains important information about product safety. Please read and understand this manual
before operating the power tool. Please keep this manual available for others before they use the power
tool.
WARNING
N136
– 2 –
SECTION PAGE
Product Specifications ..................................................................................................................... 3
Power Tool Safety............................................................................................................................ 4
Drill Press Safety.............................................................................................................................. 5
Electrical Requirements And Safety................................................................................................. 6
Accessories and Attachments ......................................................................................................... 7
Tools Needed For Assembly............................................................................................................ 7
Carton Contents .............................................................................................................................. 7
Know Your Drill Press. ..................................................................................................................... 9
Glossary of Terms ............................................................................................................................ 10
Assembly and Adjustments ............................................................................................................. 11
Operation......................................................................................................................................... 15
Maintenance .................................................................................................................................... 20
Troubleshooting Guide .................................................................................................................... 21
Parts List.......................................................................................................................................... 22
CONTENTS
English
– 3 –
English
WARNING
Some dust created by power sanding, sawing, grinding, drilling and other construction activities contains
chemicals (known to the State of California) to cause cancer, birth defects or other reproductive harm. Some
examples of these chemicals are:
● Lead based paints
● Crystalline silica from bricks, cement and other masonry products
● Arsenic and chromium from chemically treated lumber
Your risk from these exposures varies, depending on how often you do this type of work. To reduce your
exposure to these chemicals, work in a well-ventilated area and work with approved safety equipment, such
as dust masks that are specially designed to filter out microscopic particles.
PRODUCT SPECIFICATIONS
Swing ....................................... 15” (380mm) Table Size ................................. 13-15/64” x 13-15/64”
Chuck Size................................ 5/8” (16mm) (336mm x 336mm)
No Load Speed......................... 12 Speeds Table Tilt .................................... 45° Right or Left
210-2,580/min Spindle Travel............................ 3-11/32” (85mm)
Voltage ..................................... 220-240V / 50Hz Throat......................................... 7-1/2” (190.5mm)
Watts ........................................ 750W Base Size .................................. 11” x 20-3/8”
Amps ........................................ 3.6A (279.4mm x 518mm)
Built-in Light.............................. 60 Watt (Maximum) Height......................................... 63-11/16” (1,617.5mm)
(Bulb not included) Net Weight... .............................. 165 lbs (75kg)
WARNING
To avoid electrical hazards, fire hazards or damage to the drill press, use proper circuit protection.
This drill press is wired at the factory for 220-240 Volt operation. It must be connected to a 220-240 Volt / 3.6
Ampere time delay fuse or circuit breaker. To avoid shock or fire, replace power cord immediately if it is worn,
cut or damaged in any way.
Before using your drill press, it is critical that you read and understand these safety rules. Failure to follow
these rules could result in serious injury to you or damage to the drill press.
Specyfikacje produktu
| Marka: | HiKOKI |
| Kategoria: | Wiertarka |
| Model: | B16RM |
Potrzebujesz pomocy?
Jeśli potrzebujesz pomocy z HiKOKI B16RM, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą
Instrukcje Wiertarka HiKOKI
30 Września 2024
26 Września 2024
26 Września 2024
26 Września 2024
26 Września 2024
26 Września 2024
26 Września 2024
24 Września 2024
24 Września 2024
24 Września 2024
Instrukcje Wiertarka
- Wiertarka Ecomac
- Wiertarka Bavaria By Einhell
- Wiertarka Makita
- Wiertarka Global
- Wiertarka Max
- Wiertarka DeWalt
- Wiertarka Ribimex
- Wiertarka Herkules
- Wiertarka Eibenstock
- Wiertarka Cecotec
- Wiertarka Duro
- Wiertarka Velleman
- Wiertarka Netter Vibration
- Wiertarka AEG
- Wiertarka BaseTech
Najnowsze instrukcje dla Wiertarka
3 Kwietnia 2025
2 Kwietnia 2025
2 Kwietnia 2025
2 Kwietnia 2025
1 Kwietnia 2025
1 Kwietnia 2025
29 Marca 2025
29 Marca 2025
29 Marca 2025
29 Marca 2025