Instrukcja obsługi Hikvision DS-PDMCK-EG2-WB

Hikvision Czujnik Deur/ramki DS-PDMCK-EG2-WB

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Hikvision DS-PDMCK-EG2-WB (6 stron) w kategorii Czujnik Deur/ramki. Ta instrukcja była pomocna dla 30 osób i została oceniona przez 15.5 użytkowników na średnio 4.4 gwiazdek

Pobierz PDF

Strona 1/6

DS-PDMCK-EG2-WB

Wireless Magnet Shock Detector

About this Manual

The Manual includes instrucons for using and managing the Product. Pictures, charts, images and all other informaon hereinaer are for descripon and explanaon only. The informaon contained in the Manual is subject to change,

without noce, due to ﬁrmware updates or other reasons. Please ﬁnd the latest version of this Manual at the Hikvision website (hps://www.hikvision.com/).

Please use this Manual with the guidance and assistance of professionals trained in supporng the Product.

and other Hikvision's trademarks and logos are the properes of Hikvision in various jurisdicons. Other trademarks and logos menoned are the properes of their respecve owners.

Disclaimer

TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, THIS MANUAL AND THE PRODUCT DESCRIBED, WITH ITS HARDWARE, SOFTWARE AND FIRMWARE, ARE PROVIDED “AS IS” AND “WITH ALL FAULTS AND ERRORS”. HIKVISION MAKES

NO WARRANTIES, EXPRESS OR IMPLIED, INCLUDING WITHOUT LIMITATION, MERCHANTABILITY, SATISFACTORY QUALITY, OR FITNESS FOR A PARTICULAR PURPOSE. THE USE OF THE PRODUCT BY YOU IS AT YOUR OWN RISK. IN NO EVENT WILL

HIKVISION BE LIABLE TO YOU FOR ANY SPECIAL, CONSEQUENTIAL, INCIDENTAL, OR INDIRECT DAMAGES, INCLUDING, AMONG OTHERS, DAMAGES FOR LOSS OF BUSINESS PROFITS, BUSINESS INTERRUPTION, OR LOSS OF DATA, CORRUPTION OF

SYSTEMS, OR LOSS OF DOCUMENTATION, WHETHER BASED ON BREACH OF CONTRACT, TORT (INCLUDING NEGLIGENCE), PRODUCT LIABILITY, OR OTHERWISE, IN CONNECTION WITH THE USE OF THE PRODUCT, EVEN IF HIKVISION HAS BEEN

ADVISED OF THE POSSIBILITY OF SUCH DAMAGES OR LOSS.

YOU ACKNOWLEDGE THAT THE NATURE OF INTERNET PROVIDES FOR INHERENT SECURITY RISKS, AND HIKVISION SHALL NOT TAKE ANY RESPONSIBILITIES FOR ABNORMAL OPERATION, PRIVACY LEAKAGE OR OTHER DAMAGES RESULTING FROM

CYBER-ATTACK, HACKER ATTACK, VIRUS INSPECTION, OR OTHER INTERNET SECURITY RISKS; HOWEVER, HIKVISION WILL PROVIDE TIMELY TECHNICAL SUPPORT IF REQUIRED.

YOU AGREE TO USE THIS PRODUCT IN COMPLIANCE WITH ALL APPLICABLE LAWS, AND YOU ARE SOLELY RESPONSIBLE FOR ENSURING THAT YOUR USE CONFORMS TO THE APPLICABLE LAW. ESPECIALLY, YOU ARE RESPONSIBLE, FOR USING THIS

PRODUCT IN A MANNER THAT DOES NOT INFRINGE ON THE RIGHTS OF THIRD PARTIES, INCLUDING WITHOUT LIMITATION, RIGHTS OF PUBLICITY, INTELLECTUAL PROPERTY RIGHTS, OR DATA PROTECTION AND OTHER PRIVACY RIGHTS. YOU

SHALL NOT USE THIS PRODUCT FOR ANY PROHIBITED END-USES, INCLUDING THE DEVELOPMENT OR PRODUCTION OF WEAPONS OF MASS DESTRUCTION, THE DEVELOPMENT OR PRODUCTION OF CHEMICAL OR BIOLOGICAL WEAPONS, ANY

ACTIVITIES IN THE CONTEXT RELATED TO ANY NUCLEAR EXPLOSIVE OR UNSAFE NUCLEAR FUEL-CYCLE, OR IN SUPPORT OF HUMAN RIGHTS ABUSES.

IN THE EVENT OF ANY CONFLICTS BETWEEN THIS MANUAL AND THE APPLICABLE LAW, THE LATER PREVAILS.

The sensor can detect the door or window opening. When the door or window is open, an alarm will be triggered and it will be sent to the alarm center or mobile client

via security control panel.

Door Magnec Sensor Alarm: When the distance between the sensor and the magnet is longer than 3 cm, an alarm will be triggered. The indicator will ﬂash once.

Tamper Alarm: When removing the sensor, an alarm will be triggered.

Introducon

Appearance

This product and - if applicable - the supplied accessories too are

marked with "CE" and comply therefore with the applicable harmonized

European standards listed under the EMC Direcve 2014/30/EU, RE

Direcve 2014/53/EU, the RoHS Direcve 2011/65/EU.

BATTERY CAUTION

-Risk of explosion if the baery is replaced by an incorrect type.

-Improper replacement of the baery with an incorrect type may defeat a safeguard (for example, in the case of some

lithium baery types).

-Do not dispose of the baery into ﬁre or a hot oven, or mechanically crush or cut the baery, which may result in an

explosion.

-Do not leave the baery in an extremely high temperature surrounding environment, which may result in an

explosion or the leakage of ﬂammable liquid or gas.

-Do not subject the baery to extremely low air pressure, which may result in an explosion or the leakage of

ﬂammable liquid or gas.

-Dispose of used baeries according to the instrucons.

+idenﬁes the posive terminal(s) of equipment which is used with, or generates direct current. - idenﬁes the

negave terminal(s) of equipment which is used with, or generates direct current.

2012/19/EU (WEEE direcve): Products marked with this symbol

cannot be disposed of as unsorted municipal waste in the European

Union. For proper recycling, return this product to your local supplier

upon the purchase of equivalent new equipment, or dispose of it at

designated collecon points. For more informaon see:

www.recyclethis.info

2006/66/EC (baery direcve): This product contains a baery that

cannot be disposed of as unsorted municipal waste in the European

Union. See the product documentaon for speciﬁc baery

informaon. The baery is marked with this symbol, which may

include leering to indicate cadmium (Cd), lead (Pb), or mercury (Hg).

For proper recycling, return the baery to your supplier or to a

designated collecon point. For more informaon see:www.recycle-

this.info

CAUTION

RISK OF EXPLOSION IF BATTERY

IS REPLACED BY AN INCORRECT

TYPE.

REPLACEMENT OF A BATTERY

WITH AN INCORRECT TYPE THAT

CAN DEFEAT A SAFEGUARD.

CAUTION

CHEMICAL BURNING DANGER

DO NOT SWALLOW THE

BATTERY

KEEP NEW AND USED

BATTERIES AWAY FROM THE

CHILDREN.

IF YOU THINK BATTERIES MIGHT

HAVE BEEN SWALLOWED OR

PLACED INSIDE ANY PART OF

THE BODY, SEEK IMMEDIATE

MEDICAL ATTENTION.

CAUTION

DISPOSE OF USED BATTERIES

ACCORDING TO THE INSTRUC-

TIONS AND LOCAL REGULATION.

Indicator

Alarm Detecon: Red LED ﬂashes.

Detector Formaed: Red LED ﬂashes 3 mes.

4TAMPER Buon

Tampering Alarm: If the detector is disassembled, an alarm will be triggered.

Formang: Restore the device to default sengs.

Power Switch

External Input

Baery

Shock Sensor

Posioning Line

1Magnet

Hangzhou Hikvision Digital Technology CO.,Ltd. No.555 Qianmo Road, Binjiang District, Hangzhou 310052, China

In the use of the product, you must be in strict compliance with the electrical safety regulaons of the naon and region.

INSTALLATION CAUTION

-Install the equipment according to the instrucons in this manual.

-To prevent injury, this equipment must be securely aached to the ﬂoor/wall in accordance with the installaon

instrucons.

-The addional force shall be equal to three mes the weight of the equipment but not less than 50N. The

equipment and its associated mounng means shall remain secure during the installaon. Aer the installaon, the

equipment, including any associated mounng plate, shall not be damaged.

-No naked ﬂame sources, such as lighted candles, should be placed on the equipment.

FCC Informaon

Please take aenon that changes or modiﬁcaon not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

FCC compliance: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protecon

against harmful interference in a residenal installaon. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instrucons, may cause harmful

interference to radio communicaons. However, there is no guarantee that interference will not occur in a parcular installaon. If this equipment does cause harmful interference to radio or television recepon,

which can be determined by turning the equipment oﬀ and on, the user is encouraged to try to correct the interference by one or more of the following measures:

—Reorient or relocate the receiving antenna.

—Increase the separaon between the equipment and receiver.

—Connect the equipment into an outlet on a circuit diﬀerent from that to which the receiver is connected.

—Consult the dealer or an experienced radio/TV technician for help.