Instrukcja obsługi Hobart FP350
Hobart
Robot kuchenny
FP350
Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Hobart FP350 (12 stron) w kategorii Robot kuchenny. Ta instrukcja była pomocna dla 11 osób i została oceniona przez 6 użytkowników na średnio 4.8 gwiazdek
Strona 1/12
701 S. RIDGE AVENUE
TROY, OHIO 45374-0001
937 332-3000
www.hobartcorp.com F-19353 Rev. E (August 2008)
FP350 FOOD PROCESSOR
MODEL FP350 ML-104586
– 2 –
© HOBART, 2008
TABLE OF CONTENTS
GENERAL ..............................................................................................................................................................3
INSTALLATION ......................................................................................................................................................3
Unpacking ........................................................................................................................................................3
Location ...........................................................................................................................................................3
Electrical Connections .....................................................................................................................................3
OPERATION ...........................................................................................................................................................5
Controls (Fig. 1) ...............................................................................................................................................5
Fitting and Removing the Pusher Plate ...........................................................................................................5
Fitting and Removing the Cutting Tools ...........................................................................................................6
Using the Feed Cylinder ..................................................................................................................................7
Using the Feed Tube ........................................................................................................................................7
CLEANING .............................................................................................................................................................8
Cutting Tool Guide............................................................................................................................................9
MAINTENANCE ...................................................................................................................................................11
Replacement Dicing Grids .............................................................................................................................11
TROUBLESHOOTING .........................................................................................................................................12
Service ...........................................................................................................................................................12
– 3 –
Installation, Operation and Care of
MODEL FP350 FOOD PROCESSOR
SAVE THESE INSTRUCTIONS
GENERAL
The FP350 Food Processor is used for slicing, shredding, grating, Julienne cutting and dicing vegetables,
fruits, or cheese. A worktable, a wall rack, and a wide range of slicer, shredder, and dicing plates are
available options.
INSTALLATION
UNPACKING
Immediately after unpacking the FP350, check for possible shipping damage. If the Food Processor is
found to be damaged, save the packaging material and contact the carrier within 15 days of delivery.
Prior to installation, verify that the electrical service agrees with the specifi cations on the data plate located
at the rear of the machine.
Do not lift the food processor with any hinged or extended parts; lift only with one hand on the front carrying
handle and the other hand on the rear carrying handle (Fig. 1).
LOCATION
The FP350 should be operated on a suitable counter height surface. A pan (not provided), suitable for
kitchen use, can be used to capture the product at the exit chute.
ELECTRICAL CONNECTIONS
The electrical cord on this machine is equipped with a grounding- type plug which
must be connected to a properly grounded receptacle. If the receptacle is not the proper grounding
type, contact an electrician. Do not remove the grounding prong from the plug.
ELECTRICAL DATA
Model Volts Hertz Phase Amps
FP350 120 60 1 10
Specyfikacje produktu
| Marka: | Hobart |
| Kategoria: | Robot kuchenny |
| Model: | FP350 |
Potrzebujesz pomocy?
Jeśli potrzebujesz pomocy z Hobart FP350, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą
Instrukcje Robot kuchenny Hobart
7 Marca 2025
25 Września 2024
25 Września 2024
25 Września 2024
25 Września 2024
25 Września 2024
25 Września 2024
25 Września 2024
25 Września 2024
25 Września 2024
Instrukcje Robot kuchenny
- Robot kuchenny Severin
- Robot kuchenny Hotpoint
- Robot kuchenny Eurochef
- Robot kuchenny Russell Hobbs
- Robot kuchenny Gemini
- Robot kuchenny Mistral
- Robot kuchenny Dualit
- Robot kuchenny Yamazen
- Robot kuchenny Vivax
- Robot kuchenny Braun
- Robot kuchenny Zelmer
- Robot kuchenny Arzum
- Robot kuchenny Beper
- Robot kuchenny Girmi
- Robot kuchenny Bifinett
Najnowsze instrukcje dla Robot kuchenny
4 Kwietnia 2025
29 Marca 2025
29 Marca 2025
29 Marca 2025
27 Marca 2025
27 Marca 2025
12 Marca 2025
12 Marca 2025
12 Marca 2025
12 Marca 2025