Instrukcja obsługi Honeywell HED3PR3

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Honeywell HED3PR3 (2 stron) w kategorii kamera bezpieczeństwa. Ta instrukcja była pomocna dla 23 osób i została oceniona przez 7 użytkowników na średnio 4.3 gwiazdek

HED1PR3HED3PR3/ True Day/Night

Indoor/Outdoor IR Ball IP Camera

Quick Installation Guide

Document -— A — 80021229V1Rev10/2015

Thank you for purchasing a HED1PR3/ HED3PR3

camera. Follow the

instructions in this guide to

install and log in to

yourinstructions camera. For

on configuring the

camera, refer tothe

Performance Series IP

Cameras User Guide on

the andsoftware

documentation CD that came

with your camera. If

you require additional

assistance, please call the

number shown

below.

Cautions and Warnings

WARNING To ensure compliance with electrical safety standards this product is

intended for use with a Listed PowerAdapter marked with “Limited Power Source”, “LPS”,

on the unit, output rated 12 V DC, minimum 0.33A, Tma=60Deg.C orfrom Power over

Ethernet (PoE) provided by Listed Information Technology Equipment meeting the IEEE

802.3af PoE standard.

The Ethernet connection is not intended to be connected to exposed (outside plant)

networks. Do not connect two powersources to the camera at the same time.

Invisible LED radiation (850 nm). Avoidexposure to beam.

Regulatory Statements

Information tothe User: This has equipmentbeen and testedfoundto complywith the limits afor

Class B digital device, pursuantto part 15 of theFCC are Rules. These limitsdesignedto provide

reasonable against protectionharmful interference a inresidential installation. Thisequipment

generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance

with the instructions, may cause harmful interference to radio communications. However, there is no

guarantee that a particular interference will not occur ininstallation.

If this equipment does cause harmful interference to radio ortelevision reception, which can be

determined byturning the equipmentis and offon,the user encouraged to tryto correct the

interference by one or more of the following measures:

•

Reorient or relocate the receiving antenna.

•

Increase thethe separation between equipment and receiver.

•

Connectthe equipment into an outletthe a that oncircuit different fromto which receiver is

connected.

•

Consult the dealer or an experienced radio/TV technician for help.

Note Changes or modificationsnot expressly approved by party theresponsible for compliance

could void the user’sauthority to operate theequipment.

This B Classdigital apparatus complies Canadian withICES- 003.

Cet appareil numérique dedu B à - la Classeest conformela norme NMB003 Canada.

Important Safeguards

•

Read and keep these instructions.

•

Do not aim the camera toward a bright light source for extended periods to prevent damage to

the imager. Avoid operating the unit under or close to unstable light sources (may cause

flickering), or close to fluorescent lamps or objects reflecting light.

•

Do not touch the camera lens.

•

Do not drop the camera or subject it to physical shock.

•

Do not use a strong or abrasive detergent when cleaning the camera.

•

Avoid operating or storing the unit in extremely humid, dusty, hot/cold environments, where the

operating temperature is outside the recommended range of - 4°Fto 140°F (– 20°Cto 60°C).

Note Do notapplypower to the camerabefore completinginstallation.

Note Confirm the installation surface can support at least three times the weight of the camera.

Document -– A – 5 1 800 21229V1Rev10/201

Specyfikacje produktu