Instrukcja obsługi Honeywell Solaris 7980g

Honeywell czytnik kodów kreskowych Solaris 7980g

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Honeywell Solaris 7980g (46 stron) w kategorii czytnik kodów kreskowych. Ta instrukcja była pomocna dla 5 osób i została oceniona przez 3 użytkowników na średnio 4.3 gwiazdek

Pobierz PDF

Strona 1/46

Solaris 7980g

Area-Imaging Vertical Slot Scanner

User’s Guide

Disclaimer

Honeywell International Inc. (“HII”) reserves the right to make changes in specifications and other information contained in this

document without prior notice, and the reader should in all cases consult HII to determine whether any such changes have been

made. The information in this publication does not represent a commitment on the part of HII.

HII shall not be liable for technical or editorial errors or omissions contained herein; nor for incidental or consequential damages

resulting from the furnishing, performance, or use of this material.

This document contains proprietary information that is protected by copyright. All rights are reserved. No part of this document

may be photocopied, reproduced, or translated into another language without the prior written consent of HII.

Web Address: www.honeywellaidc.com

Other product names or marks mentioned in this document may be trademarks or registered trademarks of other companies

and are the property of their respective owners.

Microsoft® Windows® and the Windows logo are trademarks or registered trademarks of Microsoft Corporation.

Checkpoint® is a registered trademark of Checkpoint Systems, Inc.

Sensormatic® is a registered trademark of Tyco Retail Solutions.

Other product names or marks mentioned in this document may be trademarks or registered trademarks of other companies

and are the property of their respective owners.

For patent information, refer to www.hsmpats.com.

Customer Support

Technical Assistance ............................................................................................................ ix

Product Service and Repair .................................................................................................. ix

Limited Warranty ................................................................................................................... ix

Send Feedback ..................................................................................................................... ix

Chapter 1 - Getting Started

About This Manual ...............................................................................................................1-1

Unpacking Your Device .......................................................................................................1-1

Connecting the Device.........................................................................................................1-1

Connecting with USB .....................................................................................................1-1

Connecting with Keyboard Wedge.................................................................................1-2

Connecting with RS232 Serial Port................................................................................1-3

Connecting with RS485..................................................................................................1-5

Connecting EAS...................................................................................................................1-6

Checkpoint®...................................................................................................................1-6

Sensormatic®.................................................................................................................1-6

Connecting Auxiliary Scanner..............................................................................................1-6

Button Functionality .............................................................................................................1-8

Beeper Pitch...................................................................................................................1-8

Beeper Volume ..............................................................................................................1-8

Reading Techniques ............................................................................................................1-8

Menu Bar Code Security Settings........................................................................................1-8

Setting Custom Defaults ......................................................................................................1-8

Resetting the Custom Defaults ............................................................................................1-9

Chapter 2 - Programming the Interface

Introduction ..........................................................................................................................2-1

Programming the Interface - Plug and Play .........................................................................2-1

Keyboard Wedge .................................................................................................................2-1

Laptop Direct Connect .........................................................................................................2-1

RS232 Serial Port ................................................................................................................2-1

RS485 ..................................................................................................................................2-2

RS485 Packet Mode ......................................................................................................2-2

USB IBM SurePos ...............................................................................................................2-3

USB PC or Macintosh Keyboard..........................................................................................2-3

USB HID ..............................................................................................................................2-4

USB Serial ...........................................................................................................................2-4

CTS/RTS Emulation.......................................................................................................2-4

ACK/NAK Mode .............................................................................................................2-4

Remote MasterMind™ for USB ...........................................................................................2-4

Verifone® Ruby Terminal Default Settings...........................................................................2-5

Gilbarco® Terminal Default Settings ....................................................................................2-5

Wincor Nixdorf Terminal Default Settings ............................................................................2-5

Wincor Nixdorf Beetle™ Terminal Default Settings .............................................................2-6

Wincor Nixdorf RS232 Mode A ............................................................................................2-6

Table of Contents

Specyfikacje produktu

Marka:	Honeywell
Kategoria:	czytnik kodów kreskowych
Model:	Solaris 7980g
Kolor produktu:	Czarny
Rodzaj zasilania:	Prąd przemienny
Wysokość produktu:	148 mm
Szerokość produktu:	152 mm
Głębokość produktu:	85 mm
Waga produktu:	539 g
Certyfikat środowiskowy (zrównoważonego rozwoju):	RoHS
Technologia łączności:	Przewodowa
Certyfikaty:	CE, RoHS
Zakres temperatur (eksploatacja):	0 - 40 °C
Zakres wilgotności względnej:	5 - 95 %
Kod zharmonizowanego systemu (HS):	84716070
Liczba portów USB 2.0:	1
Napięcie:	100 - 240 V
Częstotliwość danych wejściowych:	50 - 60 Hz
Diody LED:	Status
Zakres temperatur (przechowywanie):	-20 - 60 °C
Model:	Przymocowany czytnik kodów kreskowych
Stopień ochrony IP:	IPX5
Typ skanera:	1D/2D
Maksymalny obszar skanowania:	0 x 190 mm
Zużycie energii:	400 mA
Standardowe interfejsy:	Keyboard wedge, RS-232, USB
Wersja USB:	2.0
Napięcie wyjściowe adaptera AC:	5 - 5.2 V
Poziomy światła (bezpośrednie światło słoneczne):	0 - 100000 lx
Obsługa liniowych kodów kreskowych (1D):	Codabar, Code 11, Code 128, Code 32, Code 39, Code 93, EAN-13, EAN-8, Intelligent Mail, JAN, MSI, PLANET, POSTNET, Plessey, Telepen, Trioptic, U.P.C.
Odczyt pod kątem nachylenia:	-65 - 65 °
Obsługa kodów kreskowych typu Matrix (2D):	Aztec Code, Codablock, Code 49, Data Matrix, Han Xin, MaxiCode, Micro QR Code, PDF417, QR Code
Kąt odchylenia odczytu:	-75 - 75 °
Funkcja programowania:	Tak