Instrukcja obsługi Hooker 5750-75410-LTWD

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Hooker 5750-75410-LTWD (2 stron) w kategorii krzesło. Ta instrukcja była pomocna dla 15 osób i została oceniona przez 5 użytkowników na średnio 4.6 gwiazdek

1/2

ASSEMBLY INSTRUCTION

Item#:575075410-- LTWD Upholstered Side Chair

** Please make sure you have all prior to assembly.parts indicated below

Assembly Steps:

There are two K/D chairs in one box. Please follow numbers on one chair and letters on the other chair

during assembly.

1.Place chair back (G) on a clean surface.

2.T ighten seat frame (I) to chair back (G) by using bolt), lock washer (B) and flat washer (C (A) at the

center location. (see diagram 2) Then tighten seat frame (I) to chair back (G) by using bolts (E),

lock washers (B), flat washersat corner blocks (A). (See diagram 1)

3.Please follow numbers on legs (F) and corner blocks. front corner Assemble front legs (F) onto

blocks of seat frame (I), using bolts (C), lock washers (B) and flat washers (A). Tighten all bolts by

hand. (See diagram 2)

4.After all bolts are attached and hand tightened, turn the chair upright.

5.Level the chair following the “chair leveling instruction” as below.

6.Make sure the chair is level and then tighten all bolts completely by using allen wrench . (D)

Diagram 2

Diagram 1

Specyfikacje produktu