Instrukcja obsługi Horstmann CentaurPlus C17
Horstmann
Termostaty
CentaurPlus C17
Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Horstmann CentaurPlus C17 (2 stron) w kategorii Termostaty. Ta instrukcja była pomocna dla 11 osób i została oceniona przez 6 użytkowników na średnio 3.6 gwiazdek
Strona 1/2
1.SET indicator r9.System ON indicato
2.Time of day 10.SET positions
3.Switch Period symbol 11.PROGRAMME positions
4.SET Button 12.BOOST symbol
5.BOOST or adjust (-) button 13.ADVANCE symbol
6.ADVANCE or adjust (+) button 14.AM/PM symbol
7.ENTER Button 15.Day of week indicator
8.SELECT or COPY button 16.PROGRAMME indicator
QUESTIONS AND ANSWERS
The unit display has become frozen
The indicator neon fails to illuminate
The indicator neon will illuminate but
the pump and/or boiler fails to
operate
There is no display on the
programmer
How do I know if the programmer is
still under warranty
How is the programmer removed from
the wall
This could be due to local electrical interference. Using the RESET procedure may rectify
the fault.
Using the RESET procedure may rectify the fault. If the problem persists the programmer
will need replacing.
This may indicate a problem elsewhere in your system;
E.g. A zone valve, etc. please contact a registered installer for advice.
Try the RESET procedure on page 2, if this fails to rectify the problem please have the
mains supply checked
The CentaurPlus range comes with a 2 year guarantee from the date of
manufacture. This date is located on the rear of the unit, indicated by a month over a
year
WARNING: The CentaurPlus programmer must only be removed from it’s backplate by
either a qualified electrician or heating engineer; The programmer plugs in to a 6 pin
backplate located on the rear of the unit and is secured using 2 screws located on the
bottom surface of the unit. Undo these screws and pull forward and up in an arc motion
LEAFLET No P60496
ISSUE 4
FRONT VIEW OF PROGRAMMER
Page 1
Page 4
The following are some of the easy to operate features:-
1 Hour Boost
Flexible 7 Day Control
Advance gives instant On/Off override
Up to 3 On/Off periods per 24 Hour operation.
Programme options: Auto / All day / 24 Hours / Off
BATTERY
The programmer is fitted with a non-rechargeable, long life battery, which will maintain the
programmed time settings for a minimum of ten months with the supply disconnected.
THIS SHOULD BE SUFFICIENT TO COVER POWER INTERRUPTIONS DURING THE LIFE OF THE UNIT.
During power interruptions the display will be blank, after 3 days the current time of day will be lost.
These measures are to prolong the battery life.
SERVICE AND REPAIR
This programmer is NOT user serviceable. Please do not dismantle the unit.
In the unlikely event of a fault developing please refer to the RESETTING THE PROGRAMMER section of
this user guide located on page 2. If this fails to resolve the problem please contact a local heating
engineer or a qualified electrician.
1
12
9
11
8
10
7654
2
13
14 15
3
Horstmann Controls Limited
Bristol
BS4 1UP
Email: sales@horstmann.co.uk
Website: www.horstmann.co.uk
16
Horstmann’s CentaurPlus - Two Channel Programmers Offer up
to three programmed operating periods per day, seven days a
week, with Hot water Boost and Heating Advance control on a
fully pumped system.
Specyfikacje produktu
| Marka: | Horstmann |
| Kategoria: | Termostaty |
| Model: | CentaurPlus C17 |
Potrzebujesz pomocy?
Jeśli potrzebujesz pomocy z Horstmann CentaurPlus C17, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą
Instrukcje Termostaty Horstmann
7 Sierpnia 2024
2 Lipca 2024
Instrukcje Termostaty
- Salus
- Oventrop
- Heatmiser
- Stiebel Eltron
- Fantini Cosmi
- Seitron
- White Rodgers
- Eberle
- Junkers
- AEG
- Drayton
- Vaillant
- SilverCrest
- Vemer
- Zehnder
Najnowsze instrukcje dla Termostaty
3 Kwietnia 2025
25 Stycznia 2025
15 Stycznia 2025
15 Stycznia 2025
14 Stycznia 2025
13 Stycznia 2025
13 Stycznia 2025
13 Stycznia 2025
15 Października 2024
15 Października 2024