Instrukcja obsługi Hotpoint H0I D534A S

Hotpoint zmywarka H0I D534A S

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Hotpoint H0I D534A S (8 stron) w kategorii zmywarka. Ta instrukcja była pomocna dla 12 osób i została oceniona przez 6.5 użytkowników na średnio 4.4 gwiazdek

Pobierz PDF

Strona 1/8

ENQuick Guide

THANK YOU FOR BUYING A HOTPOINT ARISTON PRODUCT.

In order to receive a more complete assistance, please register

your appliance on: www.hotpoint.eu/register

Before using the appliance carefully read Safety Instructions

guide.

PLEASE SCAN THE QR CODE ON YOUR

APPLIANCE IN ORDER TO HAVE MORE

DETAILED INFORMATION

FILLING THE SALT RESERVOIR

The use of salt prevents the formation of LIMESCALE on the dishes and on

the machine’s functional components.

• It is mandatory that the salt reservoir never be empty.

• It is important to set the water hardness.

The salt reservoir is located in the lower part of the dishwasher and must be

lled when the SALT REFILL indicator light in the control panel is lit.

1. Remove the lower rack and unscrew the reservoir cap

(anticlockwise).

2. Only the rst time you do this: ll the salt reservoir

with water.

3. Position the funnel and ll the salt reservoir (see gure)

right up to its edge (approximately 1 kg); it is not unu-

sual for a little water to leak out.

4. Remove the funnel and wipe any salt residue away from the opening.

Make sure the cap is screwed on tightly, so that no detergent can get into

the container during the wash program (this could damage the water

softener beyond repair).

Whenever you need to add salt, it is mandatory to complete the proce-

dure before the beginning of the washing cycle to avoid corrosion.

FILLING THE RINSE AID DISPENSER

Rinse aid makes dish DRYING easier. The rinse aid

dispenser A should be lled when the RINSE AID

REFILL indicator light in the control panel is lit.

NEVER pour the rinse aid directly into the

appliance tub.

FILLING THE DETERGENT DISPENSER

To open the detergent dispenser use the opening device C. Introduce the

detergent into the dry dispenser only. Place the amount of detergent for D

pre-washing directly inside the tub.

If all-in-one detergents are used, we recommend using the TABLET button,

because it adjusts the program so that the best washing and drying results

are always achieved.

Usage of detergent not designed for dishwashers may cause malfunc-

tion or damage to the appliance.

WATER SOFTENING SYSTEM

Water softener automatically reduces water hardness, consequently pre-

venting scale buildup on heater, contributing also to better cleaning e-

ciency. This system regenerates itself with salt, therefore it is required

to rell salt container when empty.

Frequency of regeneration depends on water hardness level setting - regen-

eration takes place once per 6 Eco cycles with water hardness level set to 3.

Regeneration process starts in nal rinse and nishes in drying phase, be-

fore cycle ends.

• Single regeneration consumes: ~3.5L of water;

• Takes up to 5 additional minutes for the cycle;

• Consumes below 0.005kWh of energy.

Program Programs description

Drying

phase

ActiveDry

Available

options

Duration

of wash

program

(h:min)

**)

Water

consumption

(litres/cycle)

Energy

consumption

(kWh/cycle)

Eco 50°- Eco program is suitable to clean normally soiled

tableware. that for this use. it is the most ecient program in

terms of its combined energy and water consumption. and that

it is used to assess compliance with the EU Ecodesign legislation.

3:10 9.5 0.85

Auto Intensive 65° - Automatic program for heavily soiled

dishes and pans (not to be used for delicate items).

2:00 - 3:10 14.0 - 17.0 1.50 - 1.85

Auto Mixed 55° - Automatic program for normally soiled pans

and dishes.

1:30 - 2:30 14.5 - 16.0 1.15 - 1.30

Auto Fast Wash 50° - Automatic program for limited quantity

of normally soiled crockery. Ensures optimal cleaning

performance in shorter time.

- -

0:55 - 1:20 13.0 - 14.5 1.15 - 1.25

Rapid 30’ 50° - Program to be used for half load of lightly-soiled

dishes with no dried food residues. Does not have drying phase.

0:30 9.0 0.50

Good Night 50° - Suitable for night-time operation of the

appliance. Ensures optimal cleaning and drying performance

with the lowest noise emission.

3:30 15.0 1.15

Sanitizing 65° - Normally or heavily soiled crockery, with

additional antibacterial wash. Can be used to perform

maintenance of the dishwasher.

1:40 10.0 1.30

Soak - Use to refresh crockery planned to be washed later.

No detergent to be used with this program.

0:12 4.5 0.01

Self-Clean 65° - Program to be used to perform maintenance

of the dishwasher, to be carried out only when the dishwash-

er is EMPTY using specic detergents designed for dishwash-

er maintenance.

0:50 8.0 0.85

CONTROL PANEL

FIRST TIME USE

PROGRAMS TABLE

1. On-O/Reset button with indicator light

2. Program selection button

3. Salt rell indicator light

4. Rinse Aid rell indicator light

5. Program number and delay time indicator

6. Tablet (Tab) indicator light

7. Display

8. Zone Wash 3D indicator lights

9. Zone Wash 3D button

10. Delay button

11. START/Pause button with indicator light

/ Tablet (Tab)

1 2 3 4 5 6 7 8 9 10

Specyfikacje produktu

Marka:	Hotpoint
Kategoria:	zmywarka
Model:	H0I D534A S
Typ kontroli:	Przyciski
Wbudowany wyświetlacz:	Tak
Długość przewodu:	1.3 m
Położenie urządzenia:	W pełni wbudowany
Częstotliwość wejściowa AC:	50 Hz
Napięcie wejściowe AC:	220-240 V
Wysokość produktu:	820 mm
Szerokość produktu:	598 mm
Głębokość produktu:	555 mm
Waga produktu:	35500 g
Rozmiar produktu:	Pełny rozmiar (60 cm)
Kolor drzwiczek:	Nie dotyczy
Kolor panelu sterowania:	Srebrny
Długość węża dopływowego:	1.55 m
Długość węża odpływowego:	1.5 m
Regulowana wysokość górnego koszyka:	Tak
Dostosowany do paneli:	Tak
Szerokość przedziału instalacji:	600 mm
Głębokość przedziału instalacji:	560 mm
Minimalna wysokość przedziału instalacji:	820 mm
Maksymalna wysokość przedziału instalacji:	900 mm
Programy mycia:	Auto, Eco 50°C, Intensive 65°C, Night, Quick, Soak
Liczba miejsc:	14 komplet.
Ilość programów piorących:	9
Poziom hałasu:	44 dB
Opóźniony start czasomierza:	Tak
Opóźniony start:	12 h
Czas cyklu:	190 min
Temperatura (maks):	65 °C
Klasa emisji hałasu:	B
Prąd:	10 A
Obciążenie:	1900 W
Pobór wody na cykl:	9.5 l
Zużycie energii na cykl:	0.85 kWh
Klasa wydajności energetycznej:	D
Skala efektywności energetycznej:	Od A do G
Zużycie energii na 100 cykli:	85 kWh
Regulowane nóżki:	Tak
Wskaźnik konieczności płukania:	Tak
Wskaźnik soli:	Tak
Wysokość przedziału instalacji:	900 mm
Waga wraz z opakowaniem:	37500 g
Maksymalna temperatura ciepłej wody:	60 °C
Czas cyklu (program szybki):	30 min