Instrukcja obsługi Hotpoint HS 12 A1 D.UK 1

Hotpoint lodówka HS 12 A1 D.UK 1

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Hotpoint HS 12 A1 D.UK 1 (4 stron) w kategorii lodówka. Ta instrukcja była pomocna dla 7 osób i została oceniona przez 4 użytkowników na średnio 4.2 gwiazdek

Pobierz PDF

Strona 1/4

Quick guide

THANK YOU FOR BUYING A HOTPOINT PRODUCT

In order to receive a more complete assistance, please

Before using the appliance carefully read the Safety

Instruction.

FIRST TIME USE

Wait at least two hours, after the installation, before connecting

the appliance to the power supply. Connect the appliance to the

power supply it starts the operation automatically. The ideal storage

temperatures for the food are preset in the factory.

After turning the appliance on, you must wait for 4-6 hours for the

correct storage temperature to be reached for a normally lled

appliance. Position the antibacterial anti-odour lter in the fan as

demonstrated in the lter packaging (if available). If the audible signal

sounds, it means that the temperature alarm has intervened: press the

button to switch o the acoustic alarms.

CONTROL PANEL

1. LED Light

2. On/Stand-by

3. Freezer and refrigerator compartment

temperature button

ON/STAND-BY

Press the button for 3 seconds to turn the appliance o. In

Stand-by mode the light in the refrigerator compartment does not turn

on. Press the button again briey to reactivate the appliance.

Note: this does not disconnect the appliance from the power supply.

FREEZER AND REFRIGERATOR

COMPARTMENT TEMPERATURE

The three LED indicators indicate the refrigerator compartment

set temperature. It is possible to set a dierent temperature of the

appliance with the button.

Recommended setting: MEDIUM

The following adjustments are possible:

LEDs lit Set temperature

High (less cold)

Medium-high

Medium

Medium-low

Low (colder)

Fast cool

To avoid food waste, please refer to the recommended setting and storage

times found in the online user manual.

HOW TO STORE FRESH FOOD AND BEVERAGES

** For models

with "0 ° ZONE"

COMPARTMENT

the "coolest

area" is the one

highlighted in

the legend

Legend

TEMPERATE ZONE

Suggested for storage of tropical fruit, cans, drink, eggs,

sauces, pickles, butter, jam

COOL ZONE

Suggested for storage of cheese, milk, daily food,

delicatessen, yoghurt

COOLEST AREA

Suggested for storage of cold cuts, desserts, meat and

sh

FRUIT & VEGETABLE DRAWER

* Available only on certain models

REFRIGERATOR COMPARTMENT

FAN*

The Fan improves temperature distribution inside the

product, allowing better preservation of stored food and

reduction of excess humidity.

You can turn the fan on/o by pressing the button on the

base (as shown in the gure). If the ambient temperature

exceeds 27°C, or if drops of water are present on the

glass shelves, it is essential that the fan is on to ensure the proper

preservation of the food. Deactivation of the fan allows energy

consumption to be optimised.

Light system (depending on model)

This product contains a light source of energy

eciency class G

This product contains 4 lateral light sources of

energy eciency class F

This product contains a light source of energy

eciency class G

This product contains 4 lateral light sources of

energy eciency class F and a top light source

of energy class G

This product contains a top light source of

energy eciency class G

FREEZER COMPARTMENT

Freezing fresh food

1. It is advisable to set the temperature colder or turn on the Fast Freeze/

Fast Cool* at least four hours before removing the food from the

freezer compartment, to prolong the preservation of the food during

the defrosting phase.

2. To defrost, unplug the appliance and remove the drawers. Leave

the door open to allow the frost to melt. To prevent the water from

escaping during the defrost, it is advised that you place an absorbent

cloth on the bottom of the freezer compartment and wring it out

regularly.

3. Clean the inside of the freezer compartment and dry it carefully.

4. Turn the appliance back on and put the food back inside. To remove

the frost on the STOP FROST* accessory, follow the CLEANING.

Ice cubes*

Fill 2/3 of the ice tray with water and put it back in the freezer

compartment. Do not, under any circumstances, use sharp or pointed

objects to remove the ice.

The quantity of fresh food that can be frozen in a specic time period is

indicated on the rating plate .

Load limits are determined by baskets, aps, drawers, shelves etc. Make

sure that these components can still close easily after loading .

GENERAL INFORMATION

The drawers, baskets and shelves should be kept in their current position

unless otherwise specied in this quick guide. The light system inside the

refrigerator compartment uses LED lights, allowing for better lighting than

with traditional light bulbs, as well as for very low energy consumption.

Doors and lids of the refrigeration appliance should be removed before

disposal in the landll, to avoid children or animals getting trapped inside.

Policies, standard documentation and additional product information can be found by:

• Visiting our website docs . hotpoint . eu

• Using QR Code

• Alternatively, contact our After-sales Service (See phone number in the warranty booklet). When

contacting our After-sales Service, please state the codes provided on your product's identication plate.

• The model information can be retrieved using the QR-Code reported in the energy label. The label also

includes the model identier that can be used to consult the portal of the registry at

https://eprel.ec.europa.eu

TROUBLESHOOTING

What to do if... Possible reasons Solutions

The control panel is

switched o, the appliance

does not work.

There may be an appliance power supply

problem.

Check that:

• there is not a power outage;

• the plug is properly inserted in the socket and any bipolar power

switch is in the correct position (this enables the power supply to

the appliance);

• the household electrical system protection devices are ecient;

• the power cable is not damaged.

The appliance could be in On/stand by

mode. Turn the appliance on by briey pressing the button (see On/Stand-

by function).

The inside light does not

work.

The light may need to be replace.

Malfunction of a technical component.

Disconnect the appliance from the power supply and contact the

Technical Assistance Service if you need a replacement.

The inside light ashes. Door alarm active.

It is activated when the refrigerator

compartment door remains open for a

prolonged period of time.

To stop the alarm, close the refrigerator door.

On reopening the door, check the light works.

The temperature inside the

compartments is not low

enough.

There could be various causes (see

“Solutions”).

Check that:

• the door closes properly;

• the appliance is not installed near a heat source;

• the set temperature is adequate;

• the circulation of air through the vents at the bottom of the

appliance is not obstructed (see installation section).

There is water on the

bottom of the refrigerator

compartment.

The defrost water drain is blocked. Clean the defrosting water drain (see section “Cleaning and

Maintenance").

Excessive amount of frost in

the freezer compartment.

The door to the freezer compartment is

not closed properly.

Check that there is nothing preventing the door from closing properly.

• Defrost the freezer compartment.

• Make sure the appliance has been correctly installed.

The front edge of the

appliance that the door

gaskets seal against is hot.

This is not a defect. It prevents

condensation from forming.

No solution is necessary.

One or more green symbols

are ashing continuously

and it is not possible to

change the temperature

set.

Malfunction alarm.

The alarm indicates a fault in a technical

component.

Contact Technical Assistance Service.

The temperature of the

refrigerator compartment is

too cold.

• The set temperature is too cold.

• A large amount of fresh food may

have been placed in the freezer

compartment.

• Try to set a less cold temperature.

• If fresh food has been placed in the freezer compartment, wait

until it has fully frozen.

• Turn o the fan (if present) following the procedure described in

the paragraph “FAN”.

* Available only on certain models

Note: If the chiller declaration is present in the rating plate (see image below), the declaration applies only to standard EN 62552:2013 valid until February 28th, 2021.

Specyfikacje produktu

Marka:	Hotpoint
Kategoria:	lodówka
Model:	HS 12 A1 D.UK 1
Kolor produktu:	Biały
Wbudowany wyświetlacz:	Nie
Długość przewodu:	2 m
Położenie urządzenia:	Wbudowany
Częstotliwość wejściowa AC:	50 Hz
Napięcie wejściowe AC:	220 - 240 V
Wysokość produktu:	1220 mm
Szerokość produktu:	540 mm
Głębokość produktu:	545 mm
Waga produktu:	38000 g
Kolor drzwiczek:	Biały
Szerokość przedziału instalacji:	570 mm
Głębokość przedziału instalacji:	550 mm
Poziom hałasu:	35 dB
Klasa emisji hałasu:	B
Prąd:	13 A
Obciążenie:	75 W
Klasa wydajności energetycznej:	F
Skala efektywności energetycznej:	Od A do G
Zawias drzwiczek:	Prawy
Wysokość przedziału instalacji:	1235 mm
Roczne zużycie energii:	127 kWh
Pojemność lodówki netto:	209 l
Tworzywo półek:	Szkło
Minimalna temperatura pracy:	10 °C
Maksymalna temperatura eksploatacji:	38 °C
Automatyczne rozmrażanie (lodówka):	Tak
Liczba półek w lodówce:	5
Liczba pojemników na warzywa:	1
Stojak na butelki:	Nie
Regulowane półki:	Tak
Tryb klimatu:	SN-ST