Instrukcja obs艂ugi Hotpoint HS 1801 AA.UK.1
Przeczytaj poni偶ej 馃摉 instrukcj臋 obs艂ugi w j臋zyku polskim dla Hotpoint HS 1801 AA.UK.1 (10 stron) w kategorii lod贸wka. Ta instrukcja by艂a pomocna dla 13 os贸b i zosta艂a oceniona przez 7 u偶ytkownik贸w na 艣rednio 4.5 gwiazdek
Strona 1/10
Instructions for use
3
ENGLISH Instructions for use Page 4
Always disconnect the appliance from the power supply before replacing the light bulb. Then follow
the instructions based on the type of light bulb for your product.
Replace the light bulb with one with the same features, available from the Technical Assistance Service
and authorised sellers.
Light type 1)
To remove the light bulb, unscrew it in an anti-clockwise direction, as
shown in the figure. Wait 5 minutes before reconnecting the appliance.
- traditional light bulb (max 25W)
or
- LED light bulb (with the same features)
only available from the Technical Assistance Service
Light type 2)
If the product has LED lights, as demonstrated in the figures below, contact the Technical Assistance
Service if you need a replacement.
LEDs last longer than traditional light bulbs, improve internal visibility and are environmentally-friendly.
4
Clean the appliance occasionally with a cloth and a solution of warm
water and neutral cleaning agents specifically for cleaning the inside
of the refrigerator. Do not use abrasive cleaning agents. To ensure
the constant and correct flow of the defrosting water, regularly clean
the inside of the drain situated in the back wall of the refrigerator
compartment near the fruit and vegetable drawer using the utensil
provided (see figure).
Before carrying out any maintenance or cleaning, take the plug out of the socket or disconnect the
appliance from the power supply.
Connect the appliance to the power supply.
In models with electronics, a sound signal may be emitted, which means that the temperature alarm
has been activated: press the sound alarm off button. Where provided, position the antibacterial anti-
odour filter in the fan as demonstrated in the filter packaging.
Note: After turning the appliance on, you must wait for 4-5 hours for the correct storage temperature
to be reached for a normally filled appliance.
USING FOR THE FIRST TIME
MAINTENANCE AND CLEANING
OF THE APPLICANCE
REPLACING THE LIGHT BULB OR LED
(depending on the model)
Light bulb
LED light bulb
Specyfikacje produktu
| Marka: | Hotpoint |
| Kategoria: | lod贸wka |
| Model: | HS 1801 AA.UK.1 |
Potrzebujesz pomocy?
Je艣li potrzebujesz pomocy z Hotpoint HS 1801 AA.UK.1, zadaj pytanie poni偶ej, a inni u偶ytkownicy Ci odpowiedz膮
Instrukcje lod贸wka Hotpoint
12 Marca 2025
27 Lutego 2025
27 Lutego 2025
27 Lutego 2025
26 Lutego 2025
11 Lutego 2025
6 Lutego 2025
15 Stycznia 2025
15 Stycznia 2025
13 Stycznia 2025
Instrukcje lod贸wka
- lod贸wka Vinata
- lod贸wka ColdTech
- lod贸wka Stirling
- lod贸wka Wells
- lod贸wka Cool Head
- lod贸wka Marbor
- lod贸wka Irinox
- lod贸wka Les Petits Champs
- lod贸wka Rocktrail
- lod贸wka SilverCrest
- lod贸wka De Dietrich
- lod贸wka Changhong
- lod贸wka Electrolux-Rex
- lod贸wka Steel Cucine
- lod贸wka Medion
Najnowsze instrukcje dla lod贸wka
9 Kwietnia 2025
9 Kwietnia 2025
9 Kwietnia 2025
9 Kwietnia 2025
9 Kwietnia 2025
9 Kwietnia 2025
9 Kwietnia 2025
9 Kwietnia 2025
8 Kwietnia 2025
8 Kwietnia 2025