Instrukcja obsługi HP ProLiant MicroServer G8

HP serwer ProLiant MicroServer G8

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla HP ProLiant MicroServer G8 (39 stron) w kategorii serwer. Ta instrukcja była pomocna dla 12 osób i została oceniona przez 6.5 użytkowników na średnio 4.6 gwiazdek

Pobierz PDF

Strona 1/39

HP ProLiant MicroServer Gen8

User Guide

Abstract

This document is for the person who installs, administers, and troubleshoots servers and storage systems. HP assumes you are qualified in the

servicing of computer equipment and trained in recognizing hazards in products with hazardous energy levels.

Part Number: 718898- 001

June 2013

Edition: 1

The information contained herein is subject to change without notice. The only warranties for HP products and services are set forth in the express

warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty. HP shall

not be liable for technical or editorial errors or omissions contained herein.

Microsoft® and Windows® are U.S. registered trademarks of Microsoft Corporation.

Contents 3

Contents

Component identification ............................................................................................................... 6

F ront panel components ............................................................................................................................. 6

Front panel LEDs and buttons ...................................................................................................................... 7

Rear panel components .............................................................................................................................. 8

Rear panel LEDs and buttons ....................................................................................................................... 9

System board components .......................................................................................................................... 9

DIMM slot locations ....................................................................................................................... 11

System maintenance switch ............................................................................................................. 11

NMI functionality ........................................................................................................................... 12

Drive numbering ..................................................................................................................................... 12

FBWC module LED definitions ................................................................................................................... 13

Fan location ........................................................................................................................................... 14

T- - 10/T 15 Torx screwdriver ...................................................................................................................... 14

Operations ................................................................................................................................. 15

Power up the server ................................................................................................................................. 15

Power down the server ............................................................................................................................. 15

Open the front bezel................................................................................................................................ 16

Remove the front bezel ............................................................................................................................. 17

Install the front bezel ................................................................................................................................ 18

Remove the chassis cover ......................................................................................................................... 19

Install the chassis cover ............................................................................................................................ 19

Remove the system board assembly ........................................................................................................... 20

Install the system board assembly .............................................................................................................. 22

Setup ......................................................................................................................................... 23

Optional installation services .................................................................................................................... 23

O ptimum environment.............................................................................................................................. 23

Space and airflow requirements ...................................................................................................... 23

Temperature requirements ............................................................................................................... 24

Power requirements ....................................................................................................................... 24

Electrical grounding requirements .................................................................................................... 24

Server warnings and cautions ................................................................................................................... 25

Identifying the server box contents ............................................................................................................. 25

Installing hardware options ....................................................................................................................... 25

Connecting peripheral devices .................................................................................................................. 26

Connecting the Ethernet cable ................................................................................................................... 26

Connecting the power cord ...................................................................................................................... 28

Powering on and selecting boot options ..................................................................................................... 29

Performing the initial system setup ............................................................................................................. 30

Registeri ng the server............................................................................................................................... 34

Setting up the HP PS1810- 8G Switch (optional) .......................................................................................... 34

Hardware options installation ....................................................................................................... 41

Introduction ............................................................................................................................................ 41

Bezel faceplate ....................................................................................................................................... 41

Drive options .......................................................................................................................................... 43