Instrukcja obsługi Ices IFS-400

Ices maszyna do cięcia IFS-400

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Ices IFS-400 (28 stron) w kategorii maszyna do cięcia. Ta instrukcja była pomocna dla 7 osób i została oceniona przez 4 użytkowników na średnio 4.9 gwiazdek

Pobierz PDF

Strona 1/28

IFS-400 - User Manual

KNOW YOUR FOOD SLICER

Your food slicer is suitable for cutting bread, all kinds of ham, meat, sausage, cheese and

vegetables, etc.

Main boay base

Thickness guide

Handle

Sliding meat table

Blade

Fixed-blade box

Slider

switch

Plug Power

(fig.1)

IMPORTANT SAFEGUARDS

When using electrical appliance, basic safety precautions should always be followed,

including the following:

1. Read all instruction before using slicer.

2. Close supervision is necessary when any appliance is used near children.

3. Switch off appliance first, unplug from outlet when not used, before putting on or taking

off parts, and before cleaning; Switch off appliance before approaching parts which

move in use.

4. Avoid contacting moving parts. Never feed food by hand. Always use completely

assembled slicer with sliding feed table and piece holder. The appliance must be used

with the sliding feed table and the piece holder in position unless this is not possible

duo to size or shape of the food.

5. To protect against any risk of electrical shock, do not put power unit in water or other

liquid.

6. Do not operate any appliance with a damaged cord or plug or after the appliance

malfunctions, or is dropped or damaged in any manner. Return appliance to the place

of purchase for a replacement or repair free of charge.

7. The use of attachments not recommended or sold by the appliance manufacturer may

cause fire, electric shock or injury.

8. Do not use the appliance outdoors.

9. Do not let cord hang over edge of table or counter or touch hot surface.

10. Blade is sharp. Hold only by blade lock. Handle carefully when cleaning.

11. Do not use the appliance for other than its intended use.

PREPARING TO SLICE

1. Unwrap cord from bottom of slicer, and slide into slot. Position slicer on a clean, dry

and smooth surface .

2. Move the sliding feed table back and forth a few times to make sure movement.

3. Place the piece holder on back of the sliding feed table.

4. Select the required slice thickness by turning thickness adjusting knob, clockwise for

thinner slice and counter-clockwise for thicker slice. The range of thickness adjusting

is from 0 to 15mm.

Thickness Adjusting Knob

(fig.2)

OPERATION

CAUTION: ALWAYS USE FOOD PLATEAU SUPPORT AND FOOD PUSHER

1. Plug into AC 230V~ 50Hz outlet.

2. Place food to be sliced on the sliding feed table and press the piece holder against

thickness guide. Then pull the sliding feed table against the blade by hand.

3. The maximum size of food is:110x110x90(mm)(length x width x thick).

4. Switch on the appliance.

5. When the blade is rotating, push the sliding feed table toward blade. Move tray back

and forth steadily. Keep food gently pressed against guide for even slicer.

6. Do not operate the machine more than 5 minutes. The motor may be overheat. Turn

off switch & let it rest for at least 30 minutes to cool down the motor.

7. During slicing, if the rotational speed of blade reduces, let food unfreezes for a while,

then slice again.

8. When finishing slicing, unplug unit For safety and blade protection when storing, turn .

thickness adjusting knob to align thickness guide with blade.

CLEANING

UNPLUG SLICER FROM OUTLET

All slicing parts remove for thorough cleaning. Wash with a soft cloth or sponge and a mild

soap or a spray cleaner. Rinse and dry.

z Never use steel wool or scouring powder on any part of slicer. Do not wash any part

of slicer in dishwasher.

z Motor is concealed in housing. Never submerge water.

z Motor never needs oiling.

PIECE HOLDER:

Remove the piece holder from the sliding feed table.

SLIDING FEED TABLE:

Clean the sliding feed table after removing the piece holder.

STAINLESS BLADE:

Unplug the item ,loose the left-screw as the arrow direction .Then take off the blade

carefully with hand glove. After cleaning, tighten the blade with the left-screw on the

contrary direction.

Note: Always align thickness guide with blade for safety and blade protection

during storage.

NONSLIP FEET:

Clean with any grease-removing cleanser, such as alcohol or window cleaner.

STORAGE

z Align thickness guide with blade.

z Wrap cord in storage area on bottom of slicer.

Specyfikacje produktu

Marka:	Ices
Kategoria:	maszyna do cięcia
Model:	IFS-400
Kolor produktu:	Czarny
Podręcznik użytkownika:	Tak
Ilość na paczkę:	1 szt.
Prędkość transferu danych przez Ethernet LAN:	10,100,1000 Mbit/s
System operacyjny:	Windows 10/8/7, Mac OS 10.8+
Obsługa funkcji Plug & Play:	Tak
Złączka 2:	RJ-45
Złączka 1:	USB Type-C
Złącze 1:	Męska
Złącze 2:	Żeńska
Rozmiar złącza 1:	Prosty
Rozmiar złącza 2:	Prosty