Instrukcja obsługi IFM AY1000
IFM
Niesklasyfikowane
AY1000
Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla IFM AY1000 (2 stron) w kategorii Niesklasyfikowane. Ta instrukcja była pomocna dla 14 osób i została oceniona przez 7.5 użytkowników na średnio 4.6 gwiazdek
Strona 1/2

You can use this Quick Start for an overview of the AY1000 installation. For complete
installation and confi guration information, download the device manual from the ifm.com
website.
Installation and connection
The device must be installed in a suitable housing protected against fi re and electrical or
mechanical infl uences.
Connect the power and Ethernet cables according to the following table
Terminals Description Voltage Range Remarks
V+, V-
24VDC
PWR IN
Power supply for modules and
sensors (A-ports via PWR Out
connectors)
18…30 V DC,
max. 4 A
Only use PWR connectors on one
side top OR bottom. Do not use
both at the same time.
L+, L-
PWR OUT
Port 1…8
Power supply (A-ports) for
sensors or actuators. Be aware
of the current limitations.
24 V DC,
max. 200 mA
If more current is needed for B-
port devices, take it directly from
the power supply.
Confi guration
Confi gure IP address
You can use the following procedure with the IO-Link master embedded web interface to
confi gure the AY1000 network settings (administrative rights required).
Note: The AY1000 is shipped from the factory with the Admin account enabled without a
password.
►Open browser and enter IP address of the AY1000.
Note: The AY1000 default IP address is 192.168.1.250. You may need to change your
laptop or PC network address to the same network segment to access the web interface.
►Click on [Confi guration] → [NETWORK].
►Click on the button [EDIT].
►Make any necessary network setting changes and click on [SAVE].
Connect and confi gure devices
►Connect the IO-Link and digital I/O devices
►Use the web interface to confi gure IO-Link and Profi net-IO settings
– If necessary, confi gure the dedicated digital I/O ports.
– If desired, upload the appropriate IODD fi les for the IO-Link devices.
Operating instructions
IO-Link Master Profi net AY1000

– If desired, confi gure the IO-Link device parameters using the web interface.
– If desired, implement AY1000 features or options, such as: data storage mode, de-
vice validation mode, and data validation mode.
– Use the Diagnostics pages to monitor or troubleshoot the devices.
If desired, connect to a PLC.
Electrical connection
A qualifi ed electrician must connect the unit. The national and international regulations for
the installation of electrical equipment must be adhered to.
Voltage supply to EN 50178, SELV, PELV or UL. The module must be supplied from only
one common voltage source.
The inputs and outputs are not electrically isolated.
►Disconnect power.
►Connect the device as follows; only one terminal block on the top or the bottom may be
connected.
Terminal connection top
1
LEDs
2
1: Terminal connection ext. voltage supply and IO-
Link ports 1,2,5,6
2: terminal connection and IO-Link ports 3,4,7,8
Ext. voltage supply
1: V_ext. voltage GND DC
2: V_ext. voltage GND DC
3: V_ext. voltage +24 V DC
4: V_ext. voltage +24 V DC
Terminal connection bottom
Internal voltage, inputs/outputs
1: L+ sensor supply +24 V DC
2: L- sensor supply GND DC
3: DI digital input DI
4: DO digital output DO
Terminal connection IO-Link ports
Ports 1…8
1: L+ sensor supply +24 V DC
2: L- sensor supply GND DC
3: DI digital input
4: C/Q IO-Link / DI / DO
IP address set at the factory: 192.168.1.250
7391082/00 02/2016 ifm electronic gmbh • Friedrichstraße 1 • 45128 Essen • Germany • http://www.ifm.com
Specyfikacje produktu
Marka: | IFM |
Kategoria: | Niesklasyfikowane |
Model: | AY1000 |
Potrzebujesz pomocy?
Jeśli potrzebujesz pomocy z IFM AY1000, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą
Instrukcje Niesklasyfikowane IFM
28 Stycznia 2025
28 Stycznia 2025
28 Stycznia 2025
28 Stycznia 2025
28 Stycznia 2025
28 Stycznia 2025
28 Stycznia 2025
28 Stycznia 2025
28 Stycznia 2025
28 Stycznia 2025
Instrukcje Niesklasyfikowane
- Niesklasyfikowane Sunstech
- Niesklasyfikowane Conair
- Niesklasyfikowane Möhlenhoff
- Niesklasyfikowane Squarp Instruments
- Niesklasyfikowane Auriol
- Niesklasyfikowane Silverstone
- Niesklasyfikowane Marvel
- Niesklasyfikowane Hugo Muller
- Niesklasyfikowane Könner & Söhnen
- Niesklasyfikowane Artsound
- Niesklasyfikowane Mousetrapper
- Niesklasyfikowane Atomos
- Niesklasyfikowane Brocade
- Niesklasyfikowane Little Giant
- Niesklasyfikowane Aguilar
Najnowsze instrukcje dla Niesklasyfikowane
29 Stycznia 2025
29 Stycznia 2025
29 Stycznia 2025
29 Stycznia 2025
29 Stycznia 2025
29 Stycznia 2025
29 Stycznia 2025
29 Stycznia 2025
29 Stycznia 2025
29 Stycznia 2025