Instrukcja obsługi IFM OGE080


Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla IFM OGE080 (3 stron) w kategorii Niesklasyfikowane. Ta instrukcja była pomocna dla 9 osób i została oceniona przez 5 użytkowników na średnio 4.2 gwiazdek

Strona 1/3
Operating instructions
Through-beam sensor
OGE08x
OGS08x 
704942 / 00 10 / 2010
UK
2
1  Functions and features
The through-beam sensor detects objects and materials without contact and
indicates their presence by a switching signal.
For the range see the type label.
2  Installation
Install the receiver (OGE08x) and secure it to a bracket.
Align the transmitter (OGS08x) to the receiver and secure it also to a bracket.
> Maximum range only with accurate alignment.
3  Electrical connection
Disconnect power.
Connect the unit as follows.
The device shall be protected by a Listed fuse rated 2A max
Recommendation: check the unit for reliable function after a short
circuit
3.1  Transmitter
2
3
L1
N
3
UK
3.2  Receiver
2
3
L1
N
4  Operation
Check whether the sensor operates correctly.
Receiver (OGE08x): The yellow LED is lit when the switching output is swit-
ched.
Transmitter (OGS08x): The green LED is lit when the sensor is ready for
operation.
5  Maintenance
Keep the lens of the sensor free from soiling.
For cleaning do not use any solvents or cleaning agents which could damage
the plastic material.


Specyfikacje produktu

Marka: IFM
Kategoria: Niesklasyfikowane
Model: OGE080

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z IFM OGE080, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą