Instrukcja obsługi IFM VSE100
IFM
nieskategoryzowany
VSE100
Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla IFM VSE100 (13 stron) w kategorii nieskategoryzowany. Ta instrukcja była pomocna dla 4 osób i została oceniona przez 2.5 użytkowników na średnio 4.3 gwiazdek
Strona 1/13

Operating instructions
Diagnostic electronics
for vibration sensors
VSE100
80272808/00 03/2020
UK

2
Contents
1 Preliminary note 3 ���������������������������������������������������������������������������������������������������
2 Safety instructions 3 �����������������������������������������������������������������������������������������������
3 Functions and features 3 ����������������������������������������������������������������������������������������
4 Installation������������������������������������������������������������������������������������������������������������5
4�1 Installation of the sensors 5 ������������������������������������������������������������������������������
5 Electrical connection 5 ��������������������������������������������������������������������������������������������
5�1 Limited voltage / current 6 ��������������������������������������������������������������������������������
5�2 Wiring�������������������������������������������������������������������������������������������������������������7
5�2�1 Wiring of the sensors 1���4 (S1���S4) according to the sensor 8 ��������������
5�3 Connection of the sensors 8 �����������������������������������������������������������������������������
5�3�1 Monitoring the sensor cable 9 �����������������������������������������������������������������
5�4 IP address 9 ������������������������������������������������������������������������������������������������������
5�5 Ethernet connection 9 ���������������������������������������������������������������������������������������
6 Operation �������������������������������������������������������������������������������������������������������������9
6�1 Settings, parameter setting 10 �������������������������������������������������������������������������
7 Indicators (LEDs) ����������������������������������������������������������������������������������������������� 11
8 Maintenance, repair and disposal 12 ����������������������������������������������������������������������
9 Scale drawing 12 ����������������������������������������������������������������������������������������������������

3
UK
1 Preliminary note
• An instruction is indicated by "►":
Example: ► Mount the unit as shown.
Important note
Non-compliance may result in malfunction or interference�
Information
Supplementary note
2 Safety instructions
• Please read the operating instructions prior to set-up of the unit� Ensure that
the product is suitable for your application without any restrictions�
• The unit conforms to the relevant regulations and EC directives�
• Improper or non-intended use may lead to malfunctions of the unit or to
unwanted effects in your application�
• Installation, electrical connection, set-up, operation and maintenance of the unit
must be carried out by qualified personnel authorised by the machine operator�
• The design of the unit corresponds to protection class III (EN61010) except for
the terminal blocks� Protection against accidental contact (safety from finger
contact to IP 20) for qualified personnel is only ensured if the terminals have
been completely inserted� Therefore the unit must always be mounted in a
control cabinet of at least IP 54 which can only be opened using a tool�
• For DC units the external 24 V DC supply must be generated and supplied
according to the requirements for safe extra-low voltage (SELV) since this
voltage is provided near the operating elements and at the terminals for the
supply of sensors without further protection measures�
3 Functions and features
• The diagnostic electronics has 2 analogue inputs and 4 dynamic inputs� These
inputs can be used for process value monitoring, vibration monitoring, vibration
diagnostics or analysis of other dynamic signals� The final function depends
on the firmware version� The current firmware and operating software can be
downloaded from the download area on ifm electronic's website�
Specyfikacje produktu
Marka: | IFM |
Kategoria: | nieskategoryzowany |
Model: | VSE100 |
Potrzebujesz pomocy?
Jeśli potrzebujesz pomocy z IFM VSE100, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą
Instrukcje nieskategoryzowany IFM
4 Września 2024
4 Września 2024
4 Września 2024
4 Września 2024
4 Września 2024
4 Września 2024
3 Września 2024
3 Września 2024
3 Września 2024
3 Września 2024
Instrukcje nieskategoryzowany
- nieskategoryzowany Trixie
- nieskategoryzowany Seaward
- nieskategoryzowany Euromaid
- nieskategoryzowany GLORIA
- nieskategoryzowany Smart-AVI
- nieskategoryzowany Edelkrone
- nieskategoryzowany Gra-Vue
- nieskategoryzowany Boss
- nieskategoryzowany Silverstone
- nieskategoryzowany IPGARD
- nieskategoryzowany Martin
- nieskategoryzowany Huawei
- nieskategoryzowany Laserliner
- nieskategoryzowany Shure
- nieskategoryzowany Roidmi
Najnowsze instrukcje dla nieskategoryzowany
28 Października 2024
28 Października 2024
27 Października 2024
27 Października 2024
27 Października 2024
27 Października 2024
27 Października 2024
27 Października 2024
27 Października 2024
27 Października 2024