Instrukcja obsługi Ikan PT4500S-TMW

Ikan Nie skategoryzowane PT4500S-TMW

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Ikan PT4500S-TMW (8 stron) w kategorii Nie skategoryzowane. Ta instrukcja była pomocna dla 33 osób i została oceniona przez 17 użytkowników na średnio 5.0 gwiazdek

Pobierz PDF

Strona 1/8

www.ikancorp.com | 1.713.272.8822 | sales@ikancorp.com

PT4500S-TMW

Quick Start Guide

High Bright 15" SDI Tally Teleprompter w/ 15" Widescreen SDI Talent Monitor

What’s Included

1x Teleprompter Base

1x Hood Frame

1x Silicone Hood w/ Canvas Shroud

1x Counterweight

1x Tall Riser

1x Medium Riser

1x DSLR Riser

2x L-Shaped Hex Keys

2x 1/4-20 Camera Screws

1x 15 in. SDI 4:3 Monitor

1x 15 in. SDI 16:9 Widescreen Monitor

1x Power Adapter

1x 70/30 15 in. Glass

1x Digital Copy of Prompter Pro4

www.ikancorp.com | 1.713.272.8822 | sales@ikancorp.com

Teleprompter Assembly Setup

Step 1

Place the teleprompter glass frame on a flat surface and remove the four

screws as shown.

Step 3

The metal frame is directional. Make sure the thicker side is on top and

the slimmer side is on the bottom.

Step 4

Put the washers on before tightening the screws. The washers and 4

additional screws are inside a bag on the bottom foam.

Step 2

Align and attach the teleprompter hood with the 8 screw pegs from the

teleprompter frame.

www.ikancorp.com | 1.713.272.8822 | sales@ikancorp.com

Step 6

Removethe monitor mounts from the teleprompter base using the included larger 4mm hex key to loosen from the 15mm rods.

Step 5

Extendthe teleprompter hood open and attach teleprompter boot using the clips. It is suggested to align the seamwith the bottom of the teleprompter hood.