Instrukcja obsługi IRobot Verro 600 Series
IRobot
Różne/inne
Verro 600 Series
Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla IRobot Verro 600 Series (25 stron) w kategorii Różne/inne. Ta instrukcja była pomocna dla 12 osób i została oceniona przez 6.5 użytkowników na średnio 4.9 gwiazdek
Strona 1/25

iRobot® Verro™
OWNER’S MANUAL
Model 600

2iRobot Verro Owner’s Manual
Safety Notes
WARNING: Your cleaner should not be used while people are swimming
in the pool.
A Ground Fault Current Interrupter (GFCI) must be installed to protect
your electric outlet and prevent any possible electric shock. The unit
must be supplied through a Ground Fault Current Interrupter outlet.
The connection to the branch circuit should be consistent with the local
and national wiring rules (electrical code).
If the supply cord is damaged, it must be replaced by the
manufacturer’s service agent or a qualified and trained person in order
to avoid hazards.
Always remember to turn the Power Supply OFF and unplug it from the
power outlet before removing the cleaner from the pool.
Shut off and unplug the Power Supply every time you remove the
cleaner from the water.
Do not leave the cleaner in the pool all the time.
Mishandling the unit can result in leakage of lubricants.
Please keep the plug away from contact with water.

www.irobot.com 3
Cautions
Please read this manual completely before operating your pool cleaner.
Retain the safety and operating instructions for future reference.
Do not switch the pool cleaner ON if it is not fully immersed in
water. Operating the cleaner out of water will cause severe damage
immediately and will result in loss of warranty.
Allow the cleaner to remain in the pool for 15 to 20 minutes following
the end of its cleaning cycle. This will allow the motors to cool
adequately.
Do not use Verro in a pool warmer than 100 degrees Fahrenheit.
Do not use the floating power cord to lift Verro from the pool. Use the
handle.
Do not force the floating power cord plug. It will fit into the socket only
one way.
The floating power cord must be locked in the socket on the Power
Supply.
Do not leave your cleaner in direct sunlight when not in use.
Never leave the Power Supply in direct sunlight and avoid leaving it in
the rain.
Specyfikacje produktu
Marka: | IRobot |
Kategoria: | Różne/inne |
Model: | Verro 600 Series |
Potrzebujesz pomocy?
Jeśli potrzebujesz pomocy z IRobot Verro 600 Series, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą
Instrukcje Różne/inne IRobot
11 Września 2024
4 Września 2024
1 Września 2024
1 Września 2024
30 Sierpnia 2024
29 Sierpnia 2024
Instrukcje Różne/inne
- Różne/inne A.Vogel
- Różne/inne Bifinet
- Różne/inne Lentz
- Różne/inne SodaStream
- Różne/inne Weber
- Różne/inne Deni
- Różne/inne ProfiCook
- Różne/inne BRITA
- Różne/inne BonFeu
- Różne/inne Vitamix
- Różne/inne Tefal
- Różne/inne FoodSaver
- Różne/inne Oregon Scientific
- Różne/inne Severin
- Różne/inne Unold
Najnowsze instrukcje dla Różne/inne
14 Stycznia 2025
11 Stycznia 2025
5 Października 2024
5 Października 2024
28 Września 2024
Oregon Scientific AW131 thermometer Wireless and Talking Instrukcja
28 Września 2024
28 Września 2024
28 Września 2024
28 Września 2024
28 Września 2024