Instrukcja obsługi Joy-It SBC-LCD16x2

Joy-It monitor SBC-LCD16x2

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Joy-It SBC-LCD16x2 (9 stron) w kategorii monitor. Ta instrukcja była pomocna dla 10 osób i została oceniona przez 5.5 użytkowników na średnio 4.5 gwiazdek

Strona 1/9
www.joy it.net-
Pascalstr. 8 47506 Neukirchen Vluyn-
16X2 LCD MODULE
I2C serial
1. GENERAL INFORMATION
Dear customer,
Thank you for purchasing our product. In the following, we will show you
which things should be noted during the use.
Should you encounter any unexpected problems, do not hesitate to contact
us
www.joy it.net-
Pascalstr. 8 47506 Neukirchen Vluyn-
2. USE
Connecting the display
Connect the display to the pins of your Arduino like shown in the picture
or rather in the chart.
Arduino® Uno 16 x 2 LCD
GND GND
5 V VCC
SDA SDA
SCL SCL
This picture was made in .Fritzing
Note
On the back of the display, besides the connections, there is a potentio-
meter and a jumper.
The potentiometer is used to adjust the contrast of the display and by
removing the jumper, you can permanently turn o the display's
backlight.
www.joy it.net-
Pascalstr. 8 47506 Neukirchen Vluyn-
Installation of the library
Before you can transfer the code example to your Arduino, you must
install first the additional library .LiquidCrystal_I2C
This library allows you an easy and fast usage of the display.
Therefore, open the library manager on your Arduino soware.
Search now in the library manager for the library and LiquidCrystal_I2C
install it.


Specyfikacje produktu

Marka: Joy-It
Kategoria: monitor
Model: SBC-LCD16x2

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Joy-It SBC-LCD16x2, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą