Instrukcja obsługi JUNG UD1755REG
Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla JUNG UD1755REG (7 stron) w kategorii Opornik. Ta instrukcja była pomocna dla 25 osób i została oceniona przez 13 użytkowników na średnio 4.5 gwiazdek
Strona 1/7
LB management
LB management
LB management
LB managementLB management
Universal dimmer LED
Universal dimmer LED
Universal dimmer LED
Universal dimmer LED
Universal dimmer LEDUniversal dimmer LED
Art. no.: UD1755REG
Operating instructions
Operating instructions
Operating instructions
Operating instructionsOperating instructions
1
1
1
11 Safety instructions
Safety instructions
Safety instructions
Safety instructionsSafety instructions
Electrical devices may only be mounted and connected by electrically skilled persons.
Electrical devices may only be mounted and connected by electrically skilled persons.
Electrical devices may only be mounted and connected by electrically skilled persons.
Electrical devices may only be mounted and connected by electrically skilled persons.Electrical devices may only be mounted and connected by electrically skilled persons.
Serious injuries, fire or property damage possible. Please read and follow manual fully.
Serious injuries, fire or property damage possible. Please read and follow manual fully.
Serious injuries, fire or property damage possible. Please read and follow manual fully.
Serious injuries, fire or property damage possible. Please read and follow manual fully.Serious injuries, fire or property damage possible. Please read and follow manual fully.
Danger of electric shock. Always disconnect before carrying out work on the device or load.
Danger of electric shock. Always disconnect before carrying out work on the device or load.
Danger of electric shock. Always disconnect before carrying out work on the device or load.
Danger of electric shock. Always disconnect before carrying out work on the device or load.Danger of electric shock. Always disconnect before carrying out work on the device or load.
Danger of electric shock. Device is not suitable for disconnection from supply voltage. The load
Danger of electric shock. Device is not suitable for disconnection from supply voltage. The load
Danger of electric shock. Device is not suitable for disconnection from supply voltage. The load
Danger of electric shock. Device is not suitable for disconnection from supply voltage. The loadDanger of electric shock. Device is not suitable for disconnection from supply voltage. The load
is not electrically isolated from the mains even when the device is switched off.
is not electrically isolated from the mains even when the device is switched off.
is not electrically isolated from the mains even when the device is switched off.
is not electrically isolated from the mains even when the device is switched off.is not electrically isolated from the mains even when the device is switched off.
Risk of destruction if the set operating mode and load type do not match. Set correct operating
Risk of destruction if the set operating mode and load type do not match. Set correct operating
Risk of destruction if the set operating mode and load type do not match. Set correct operating
Risk of destruction if the set operating mode and load type do not match. Set correct operatingRisk of destruction if the set operating mode and load type do not match. Set correct operating
mode when connecting or exchanging the load.
mode when connecting or exchanging the load.
mode when connecting or exchanging the load.
mode when connecting or exchanging the load.mode when connecting or exchanging the load.
Fire hazard. For operation with inductive transformers, each transformer must be fused on the
Fire hazard. For operation with inductive transformers, each transformer must be fused on the
Fire hazard. For operation with inductive transformers, each transformer must be fused on the
Fire hazard. For operation with inductive transformers, each transformer must be fused on theFire hazard. For operation with inductive transformers, each transformer must be fused on the
primary side in accordance with the manufacturer's instructions. Only safety transformers ac-
primary side in accordance with the manufacturer's instructions. Only safety transformers ac-
primary side in accordance with the manufacturer's instructions. Only safety transformers ac-
primary side in accordance with the manufacturer's instructions. Only safety transformers ac-primary side in accordance with the manufacturer's instructions. Only safety transformers ac-
cording to EN 61558-2-6 may be used.
cording to EN 61558-2-6 may be used.
cording to EN 61558-2-6 may be used.
cording to EN 61558-2-6 may be used.cording to EN 61558-2-6 may be used.
These instructions are an integral part of the product, and must remain with the end customer.
These instructions are an integral part of the product, and must remain with the end customer.
These instructions are an integral part of the product, and must remain with the end customer.
These instructions are an integral part of the product, and must remain with the end customer.These instructions are an integral part of the product, and must remain with the end customer.
2
2
2
22 Intended use
Intended use
Intended use
Intended useIntended use
Intended use
Intended use
Intended use
Intended useIntended use
– Switching and dimming of lighting
– Mounting in a sub-distribution unit on DIN rail according to EN 60715
– Operation is performed using the buttons, 2-wire or 3-wire extension with button cover,
rotary dimmer extension or push-button with NO contact
3
3
3
33 Product characteristics
Product characteristics
Product characteristics
Product characteristicsProduct characteristics
– Device works according to the leading edge phase control or trailing edge phase control
principle
– Automatic or manual setting of the dimming principle suitable for the load
– Display of the set operating mode by means LED
– Switch-on via bulb-preserving soft start
– Switch on with last saved brightness or saved switch-on brightness
– Switch-on brightness can be saved permanently
– Minimum brightness can be saved permanently
– Electronic short-circuit protection with permanent switch-off after 7 seconds at the latest
– Electronic over-temperature protection
Power extension possible by means of power boosters.
4
4
4
44 Operation
Operation
Operation
OperationOperation
These instructions describe operation using the buttons on the device and using a 2-wire or 3-
wire extension with a button cover or push-button as extension.
The LED display (1) turns green when the load is switched on.
Switching the light
Switching the light
Switching the light
Switching the lightSwitching the light
￭ Press the button or button cover briefly: Light is switched on at the last set brightnessn
or the stored switch-on brightness.
￭ Press the button or button cover briefly: The light is switched off.o
3-wire extension: Press top to switch on, press bottom to switch off.
1 / 7
82400023 13.03.2020
J0082400023
Specyfikacje produktu
| Marka: | JUNG |
| Kategoria: | Opornik |
| Model: | UD1755REG |
Potrzebujesz pomocy?
Jeśli potrzebujesz pomocy z JUNG UD1755REG, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą
Instrukcje Opornik JUNG
13 Września 2024
3 Września 2024
30 Sierpnia 2024
30 Sierpnia 2024
30 Sierpnia 2024
29 Sierpnia 2024
29 Sierpnia 2024
27 Sierpnia 2024
25 Sierpnia 2024
23 Sierpnia 2024
Instrukcje Opornik
- Chauvet
- Chacon
- Gira
- GAO
- American DJ
- Mercury
- Homematic IP
- Merten
- DiO
- Eurolite
- Vimar
- Berker
- Intertechno
- Fibaro
- EtiamPro
Najnowsze instrukcje dla Opornik
2 Kwietnia 2025
12 Marca 2025
15 Grudnia 2024
15 Grudnia 2024
15 Grudnia 2024
15 Grudnia 2024
15 Grudnia 2024
15 Grudnia 2024
15 Grudnia 2024
15 Grudnia 2024