Instrukcja obsługi JUNG W8180

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla JUNG W8180 (15 stron) w kategorii przełącznik. Ta instrukcja była pomocna dla 17 osób i została oceniona przez 6 użytkowników na średnio 5.0 gwiazdek

Automatic Switch 180Automatic Switch 180

Ref.-no.: W 8180

W 8280

Operating Instructions

WG 800 Automatic Switch 180

1. Safety Instructions

Attention: The installation and assembly of electrical equipment

may only be performed by a qualified electrician. Not suitable for

safety disconnection.

To avoid electric shock, safely disconnect the automatic switch

(switch o the automatic circuit breaker) prior to working on it, or

before changing the lamp.)

Non-observance of these installation instructions may cause re or

other hazards.

2. Function

Function Principle

The automatic switches respond to thermal movements initiated by

persons, animals or objects and trigger a switching process. The

automatic switches remain switched on as long as some movements are

detected, otherwise they will switch off after their shut-off delay time has

elapsed. Optionally, the automatic Switch can also be set to short-time

operation. This facilitates the activation of acoustic signal transmitters

(bell) to observe an entrance door. The automatic switches have been

designed for operation together with a switching insert.

Important: These automatic switches are not suitable for alarm systems.

Depending on the lens used, the nominal installation height is

1.10 or 2.20 m.

The 2.20 m lens automatic switches can also be installed at

the height of 1.10 m.

Stand: Jul-10 825 187 03

Specyfikacje produktu