Instrukcja obsługi Kathrein EXR 2508


Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Kathrein EXR 2508 (5 stron) w kategorii Dekodery cyfrowe. Ta instrukcja była pomocna dla 18 osób i została oceniona przez 9.5 użytkowników na średnio 4.1 gwiazdek

Strona 1/5
1 / 8
Cascadable multi-switch for distribution of four satel-
lite levels and terrestrial signals across multiple
TV/Receiver
Only one downlink per TV/Receiver needed
(two for twin TV/Receiver)
Independent selection of horizontal/vertical, low/high,
for each TV/Receiver
Switchable via the coaxial cable with 14/18 V and
0/22 kHz signal frequency
Integral amplifi er for low attenuation in satellite signal
band
Integral pre-emphasis to equalise cable attenuation
Terrestrial signals also receivable even when sat
TV/Receiver switched o
Terrestrial band: 5-862 MHz, passive
High degree of insulation between outputs
Multi-switches EXR 2558 and EXR 2554, together with
single-cable multi-switches of the EXD and EXE series
can be combined
Up to eight multi-switches can be cascaded
For indoor installation
EXR 2508
Multi-switches for eight ports with power supply unit
for LNB power feed
NCF 18
Low power consumption based on high-e ciency
short-circuit-proof switch-mode power supply unit
Kathrein Power-Saving:
The LNB power feed is switched o as soon as there
are no longer any TV/Receiver active on the EXR 2508
or in the cascade. This function can be deactivated,
for instance if loop-through multi-switches without
Kathrein Power-Saving as used in the cascade
LNB-Fernspeisung über den Eingang horizonal low.
Signalisierung Kathrein-Power-Saving über den Stamm
„vertikal low. All other inputs are voltage-free
Sat-IF distribution system (4 x sat-IF)
Multi-switch
Features
EXR 2554 and EXR 2558
Loop-through multi-switch for system extension with
four or eight connections each
Kathrein Power-Saving:
As soon as there are no longer any TV/Receiver active,
a signal is generated at the last multi-switch via the
„vertical low“ trunk. This signal then switches the LNB
power supply o .
EXR 2508 20510095
EXR 2554 20510097
EXR 2558 20510096


Specyfikacje produktu

Marka: Kathrein
Kategoria: Dekodery cyfrowe
Model: EXR 2508
Kolor produktu: Szary
Waga produktu: 650 g
Zakres częstotliwości: 47 - 862 MHz
Zakres temperatur (eksploatacja): -20 - 55 °C
Obsługiwane formaty plików wideo: Nieobsługiwany
Wymiary produktu (SxGxW): 215 x 148 x 43 mm
Zasilanie: 198 - 253V AC
Zużycie energii: 20 mA
Obsługa funkcji Plug & Play: Tak
Inne połączenia: 1 x terr., 4 x Sat-ZF, 8 x Sub.
Złącze RF: F
Wyjście wideo - analogowe: Tak

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Kathrein EXR 2508, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje Dekodery cyfrowe Kathrein

Instrukcje Dekodery cyfrowe

Najnowsze instrukcje dla Dekodery cyfrowe