Instrukcja obsługi Keenetic Giga
Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Keenetic Giga (14 stron) w kategorii router. Ta instrukcja była pomocna dla 18 osób i została oceniona przez 9.5 użytkowników na średnio 4.3 gwiazdek
Strona 1/14

User Guide
Learn more about the features of your Keenetic at
help.keenetic.com

4321
5 6 8 97
1 Button (Reset)
To reset the administrator password and all
user settings for all modes, press this button
and hold for 10 seconds until the indicator
starts flashing. The Keenetic will reboot with the
default settings, in the main operation mode.
2 Network ports "1", "2", "3", "4"
By default the ports are intended for home
devices, but they can be re-configured
and used to connect to the Internet. The
indicators located above the ports light up
when a connection is established for the
port, and flash during data transfer.
Getting started with Keenetic Giga

3 Combo port "0"
Port for Internet connection, combining
aRJ-45 connector for Ethernet cable and
aSFP slot for a fiber optic connection via SFP
module (sold separately). It is possible to use
only one connection type at the same time.
If an SFP module is plugged in, the RJ-45
connector will be disabled. The connection
that is currently active can be identified by
the indicator located above the port.
4 DC power connector
Connector for the DC power adapter
from Keenetic package. The Keenetic
isdesigned for continuous operation and
does not need to be powered off daily.
5 Indicator (Status)
On
— the Keenetic is ready for operation.
Off
— the Keenetic is turned off.
Flashing slowly
— the Keenetic is being
rebooted or is updating its operating system.
Flashing for 2 seconds, then steady on
—
FN button or button is pressed; the
function assigned to the button was started.
Flashing for 2 seconds, then off for 2 seconds
—
FN button or button is pressed; the function
assigned to the button was stopped.
6 Indicator (Internet)
On
— the Internet connection
has been established.
Off
— there is no Internet connection.
1210
11
Specyfikacje produktu
Marka: | Keenetic |
Kategoria: | router |
Model: | Giga |
Kolor produktu: | Grey, White |
Typ produktu: | Router biurkowy |
Rodzaj zasilania: | Prąd przemienny |
Wbudowany wyłącznik: | Tak |
Wbudowany wyświetlacz: | Nie |
Częstotliwość wejściowa AC: | 50 - 60 Hz |
Napięcie wejściowe AC: | 100 - 240 V |
Wysokość produktu: | 33 mm |
Szerokość produktu: | 214 mm |
Głębokość produktu: | 154 mm |
Waga produktu: | 488 g |
Port USB: | Tak |
Zasilacz sieciowy: | Tak |
Wielkość pamięci flash: | 128 MB |
Pojemność pamięci wewnętrznej: | 512 MB |
Procesor wbudowany: | Tak |
Standardy komunikacyjne: | IEEE 802.11k, IEEE 802.11r, IEEE 802.11v, IEEE 802.1Q |
Ilość portów Ethernet LAN (RJ-45): | 5 |
Zakres temperatur (eksploatacja): | 0 - 40 °C |
Zakres wilgotności względnej: | 20 - 95 % |
Taktowanie procesora: | 880 MHz |
Standardy Wi- Fi: | Wi-Fi 6 (802.11ax) |
Skrócona instrukcja obsługi: | Tak |
Przewody: | LAN (RJ-45) |
Liczba portów USB 2.0: | 1 |
Przewodowa sieć LAN: | Tak |
Obsługiwane operacyjne systemy komórkowe: | Android, iOS |
Szyfrowanie / bezpieczeństwo: | HTTPS, IPSec, WEP, WPA-PSK, WPA2-Enterprise, WPA2-PSK, WPA3-Enterprise, WPA3-PSK |
Typ interfejsu Ethernet LAN: | Gigabit Ethernet |
Producent procesora: | MediaTek |
Liczba rdzeni procesora: | 2 |
Typ pamięci wewnętrznej: | DDR3 |
Klient DHCP: | Tak |
Ilość portów USB 3.2 Gen 1 (3.1 Gen 1) Typu-A: | 1 |
Rodzaj opakowania: | Pudełko |
Obsługa jakość serwisu (QoS): | Tak |
Poziom wzmocnienia anteny (max): | 5 dBi |
WLAN wskaźnik przesyłu danych (max): | 1201 Mbit/s |
Universal Plug and Play (UPnP): | Tak |
Konstrukcja anteny: | Zewnętrzny |
Filtrowanie adresów MAC: | Tak |
Tłumaczenie adresów sieciowych (NAT): | Tak |
Oprogramowanie do stałych inspekcji pakietów: | Tak |
Ethernet WAN: | Tak |
DSL WAN: | Nie |
Gniazdo karty SIM: | Nie |
Połączenie USB 3G/4G: | Tak |
Częstotliwość Wi-Fi: | Dual-band (2.4 GHz/5 GHz) |
Przycisk WPS: | Tak |
Serwer DHCP: | Tak |
Typ połączenia WAN: | RJ-45 |
Wi-Fi Multimedia (WMM) / (WME): | Tak |
Dostęp dla gości: | Tak |
Dostęp do harmonogramu: | Tak |
Minimalna ilość pamięci RAM: | 512 MB |
Przekazywanie VPN: | Tak |
Kontrola rodzicielska: | Tak |
Przekierowanie portów: | Tak |
Dynamiczny DNS (DDNS): | Tak |
Technologia Inteligent mesh: | Tak |
zapobieganie atakom DoS: | Tak |
Klasa wydajności aplikacji: | Tak |
Serwer VPN: | OpenVPN |
Routing oparty na regułach: | Tak |
Serwer medialny: | Tak |
Statystyka bezprzewodowa: | Tak |
Potrzebujesz pomocy?
Jeśli potrzebujesz pomocy z Keenetic Giga, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą
Instrukcje router Keenetic
30 Maja 2024
Instrukcje router
- router Amped Wireless
- router Gembird
- router Ocean Matrix
- router Allnet
- router Schneider
- router Arcadyan
- router Asus
- router EZVIZ
- router Smart-AVI
- router RGBlink
- router Approx
- router EXSYS
- router Cambium Networks
- router Techly
- router Edgewater
Najnowsze instrukcje dla router
9 Kwietnia 2025
9 Kwietnia 2025
8 Kwietnia 2025
3 Kwietnia 2025
2 Kwietnia 2025
1 Kwietnia 2025
30 Marca 2025
30 Marca 2025
30 Marca 2025
30 Marca 2025