Instrukcja obsługi Kuzco Motif PD75027

Kuzco Ulga Motif PD75027

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Kuzco Motif PD75027 (1 stron) w kategorii Ulga. Ta instrukcja była pomocna dla 9 osób i została oceniona przez 5 użytkowników na średnio 4.7 gwiazdek

Strona 1/1
INSTALLATION SHEET
PD75027
Ceiling LED Pendant
START FROM HERE
19054 28th Avenue Surrey, BC Canada V3Z 6M3
T: 604 538 7162 TF: 1-855 85 KUZCO F: 604 538 7196
W: kuzcolighting.com
Please Note:
This Kuzco LED fixture comes with pre-wired LED module(s)
contact with the module could cause permanent damage
For dimming, an ELV (Electronic Low Voltage) or TRIAC type of dimmer is required
120V input
Make sure is POWER COMPLETELY OFF at the fuse box
Have your fixture installed by a qualified licensed electrician
Prepare everything in a clear area
Wear gloves at all times during this installation
Read instructions carefully before you start assembly
Keep this installation sheet for future reference
Technical Support: 1-855-855-8926
Remove fixture from its original package
Separate mounting plate from canopy (1c) (2a) by
removing canopy screws (2b)
Attach mounting plate to electrical junction box (1c)
(1a) (1e) using junction box screws provided in
hardware package
To change fixture height, push and hold wire gripper
(2g), slide wire to desired length and then release wire
gripper (2g) to secure
Make proper electrical connections ( to L, black hot
white ground GND) to N, neutral to with wire
nuts (1b) provided in hardware package and place
driver (4a) inside junction box (1a)
Attach canopy to mounting plate with (2a) (1c) canopy
screws (2b)
Secure pendant tube to pendant holder by (3b) (3a)
threading clockwise
1.
2.
3.
4.
5.
6.
1a.
1b.
4a.
1c.
1e.
2a.
2b.
3a.
3b.
2g.
7.
20220322


Specyfikacje produktu

Marka: Kuzco
Kategoria: Ulga
Model: Motif PD75027

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Kuzco Motif PD75027, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą