Instrukcja obsługi Kyoritsu KEW4105DL
Kyoritsu
Sprzęt pomiarowy
KEW4105DL
Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Kyoritsu KEW4105DL (29 stron) w kategorii Sprzęt pomiarowy. Ta instrukcja była pomocna dla 21 osób i została oceniona przez 11 użytkowników na średnio 4.5 gwiazdek
Strona 1/29

Instruction Manual
Digital Earth Resistance Tester
KEW 4105DL/4105DLBT
KEW4105DL
KEW4105DLBT (Equipped Bluetooth)

1
1.Safety warnings
This instrument has been designed, manufactured and tested
acc ording to IEC 61010: Safety requirements for Electronic
measuring apparatus, and delivered in the best condition after
passing quality control tests. This instruction manual contains
warnings and safety rules which have to be observed by the user
toensuresafeoperationoftheinstrumentandtomaintainitinsafe
condition.Therefore,readthroughtheseoperatinginstructionsbefore
startingtousetheinstrument.
#DANGER
●Readthroughandunderstandtheinstructionscontainedinthis
manualbeforestartingtousetheinstrument.
●Keepthemanualathandtoenablequickreference whenever
necessary.
●Theinstrumentistobeusedonlyinitsintendedapplications.
●Understand and followallthesafety instructionscontainedin
themanual.
Itis essentialthatthe aboveinstructions are adhered to.Failure
to follow the above instructions may cause injury, instrument
damage and/or damage to equipment under test. Kyoritsu is by
no means liablefor anydamage resultingfrom the instrument in
contradictiontothesecautionarynotes.
The symbol indicated on the instrument, means that the user#
mustrefertotherelatedpartsinthemanualforsafeoperationofthe
instrument. It is essential to read the instructions wherever the
symbolappearsinthemanual.
# :is reserved for conditions and actions that areDANGER
likelytocauseseriousorfatalinjury.
#WARNING:is reserved for conditions and actions that can
causeseriousorfatalinjury.
#CAUTION:is reserved for conditions and actions that can
causeinjuryorinstrumentdamage.

2
#DANGER
●Never make measurements on circuits in which earth
potentialshigherthanthefollowingvaluesexist.
*300 V or higher in CAT II, 150 V or higher in CAT III and
100VorhigherinCATIVenvironment.
●Keepyourhandandfingersbehindtheprotectivefingerguard
duringameasurement.
●Do not attempt to make measurements in the presence of
flammable gasses. Otherwise the use of the instrument may
causesparking,whichcanleadtoanexplosion.
●Neverattempttousetheinstrumentifitssurfaceoryourhand
iswet.
●Be careful not to short-circuit the power line with the metal
part of the test lead during a measurement. It may cause
personalinjury.
●
Donotexceedthemaximumallowableinputofanymeasuringrange.
●Ens ure that the test leads are firmly co nn ected to the
instrument,andthenpresstheTESTbutton.
●Never open the batter y com partment cover during a
measurement.
●Th e instrument should be used o nly in its intend ed
applications or conditions . Oth erwise, safety functions
equipped with the instrument do not work, and instrument
damageorseriouspersonalinjurymaybecaused.
●Keepyourfingersandhandsbehindtheprotectivefingerguard
duringmeasurement.
#WARNING
●Never attempt to make any measurements if any abnormal
conditions,suchasabrokencoverorexposedmetalpartsare
presentontheinstrumentandclampsensor.
●Do not install substitute parts or make any modifications to
theinstrument.ReturntheinstrumenttoyourlocalKYORITSU
distributor for repair or re-calibration in case of suspected
faultyoperation.
●
Donottrytoreplacebatteriesifthesurfaceoftheinstrumentiswet.
●Connectthetestleadsfirmlyintoeachterminal.
●Set the range selector switch to OFF position when opening
thebatterycompartmentcoverforbatteryreplacement.
●Stopusingthetestleadiftheouterjacketisdamagedandthe
innermetalorcolorjacketisexposed.
Specyfikacje produktu
Marka: | Kyoritsu |
Kategoria: | Sprzęt pomiarowy |
Model: | KEW4105DL |
Potrzebujesz pomocy?
Jeśli potrzebujesz pomocy z Kyoritsu KEW4105DL, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą
Instrukcje Sprzęt pomiarowy Kyoritsu
24 Lutego 2025
5 Października 2024
30 Września 2024
30 Września 2024
30 Września 2024
30 Września 2024
30 Września 2024
30 Września 2024
30 Września 2024
30 Września 2024
Instrukcje Sprzęt pomiarowy
- Sprzęt pomiarowy Hikmicro
- Sprzęt pomiarowy Carrier
- Sprzęt pomiarowy Aerospace Logic
- Sprzęt pomiarowy Technics
- Sprzęt pomiarowy Eltako
- Sprzęt pomiarowy Cliff
- Sprzęt pomiarowy Megasat
- Sprzęt pomiarowy Grohe
- Sprzęt pomiarowy Digitus
- Sprzęt pomiarowy Fantini Cosmi
- Sprzęt pomiarowy BAXTER
- Sprzęt pomiarowy Qualita
- Sprzęt pomiarowy Senseca
- Sprzęt pomiarowy Meec Tools
- Sprzęt pomiarowy Soler & Palau
Najnowsze instrukcje dla Sprzęt pomiarowy
3 Kwietnia 2025
3 Kwietnia 2025
3 Kwietnia 2025
3 Kwietnia 2025
3 Kwietnia 2025
3 Kwietnia 2025
3 Kwietnia 2025
3 Kwietnia 2025
3 Kwietnia 2025
3 Kwietnia 2025