Instrukcja obsługi LG UT12FH
LG
klimatyzacja
UT12FH
Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla LG UT12FH (7 stron) w kategorii klimatyzacja. Ta instrukcja była pomocna dla 12 osób i została oceniona przez 6.5 użytkowników na średnio 4.3 gwiazdek
Strona 1/7
www.lg.com
Please read this manual carefully before operating your set and retain it for future
reference. Installation work must be performed in accordance with the national wiring
standards by authorized personnel only.
This equipment shall be provided with a supply conductor complying with the national
regulation.
Original instruction (R410A/R32)
[
Representative
]
LG Electronics Inc. EU Representative : LG Electronics European Shared
Service Center B.V. Krijgsman 1, 1186 DM Amstelveen, The Netherlands
[Manufacturer]
LG Electronics Inc. Changwon 2nd factory 84, Wanam-ro,
Seongsan-gu, Changwon-si, Gyeongsangnam-do, KOREA
Copyright © 2019 - 2020 LG Electronics Inc. All Rights Reserved.
OWNER’S MANUAL
AIR
CONDITIONER
MFL71666501
Rev.00_010920
ENGLISH ITALIANO ESPAÑOL FRANÇAIS DEUTSCH
ΕΛΛΗΝΙΚΆ
ČEŠTINA
NEDERLANDS
POLSKI
LIMBA ROMÂNĂ
4Indoor Unit
Safety Instructions
- Do not disassemble or repair the product. There is risk of fire or
electric shock.
• Always ground the product.
- There is risk of fire or electric shock.
• Install the panel and the cover of control box securely.
- There is risk of fire or electric shock.
• Always install a dedicated circuit and breaker.
- Improper wiring or installation may cause fire or electric shock
• Use the correctly rated breaker or fuse.
- There is risk of fire or electric shock.
• Do not modify or extend the power cable.
- There is risk of fire or electric shock.
• Do not install, remove, or re-install the unit by yourself (customer).
- There is risk of fire, electric shock, explosion, or injury.
• Be cautious when unpacking and installing the product.
- Sharp edges could cause injury. Be especially careful of the case
edges and the fins on the condenser and evaporator.
• For installation, always contact the dealer or an Authorized Service
Center.
- There is risk of fire, electric shock, explosion, or injury.
• Do not install the product on a defective installation stand.
- It may cause injury, accident, or damage to the product.
• Do not turn on the breaker or power under condition that front panel,
cabinet, top cover, control box cover are removed or opened.
- Otherwise, it may cause fire, electric shock, explosion or death.
• Be sure the installation area does not deteriorate with age.
- If the base collapses, the air conditioner could fall with it, causing
property damage, product failure, and personal injury.
• Use a vacuum pump or Inert (nitrogen) gas when doing leakage test or
air purge. Do not compress air or Oxygen and Do not use Flammable
gases. Otherwise, it may cause fire or explosion.
- There is the risk of death, injury, fire or explosion.
• The appliance shall be stored in a well-ventilated area where the room
size corresponds to the room area as specified for operation. (for R32)
Owner’s Manual 13
ENGLISH
Operating Instructions
ڸ ڸ
ڹ
Temp(°C/°F)
25°C(78°F)
22°C(72°F)
19°C(66°F)
Code Feel
2 Cold
1 Slightly cool
0 Neutral
-1 Slightly warm
-2 Warm
1Press the button repeatedly until
icon blinks.
2Press the or button to set the
desired temperature.
3Press the button to set the desired
change temperature.
※Default value is 2°C(4°F). Change temperature
range: 1°C ~ 7°C (2°F ~ 14°F)
Cooling only model
The temperature and fan speed are automatically set
by the electronic controls based on the actual room
temperature.
If you feel hot or cold, press or buttons for
more cooling or heating effect.
You cannot switch the indoor fan speed. It has already
been set by the auto mode rule.
Please select the code depend on your feeling.
Example of using change temperature
Condition
1) Mode: Auto mode
2) Temperature: 22°C(72°F)
3) Change Temperature: 3°C(6°F) Change→
Temperature 3°C(6°F) difference
※In case of the above conditions, it operates as in the
graph.
Cooling & Heating model
You can set desired temperature and indoor fan speed.
Setting the mode change temperature
①: Cooling operation start
②: Heating operation start
1Press the button repeatedly to select the
auto operation mode.
icon is displayed.
Auto operation mode
This function automatically manages room temperature
based on set temperature.
Specyfikacje produktu
| Marka: | LG |
| Kategoria: | klimatyzacja |
| Model: | UT12FH |
Potrzebujesz pomocy?
Jeśli potrzebujesz pomocy z LG UT12FH, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą
Instrukcje klimatyzacja LG
28 Marca 2025
26 Marca 2025
26 Marca 2025
26 Marca 2025
26 Marca 2025
21 Lutego 2025
21 Lutego 2025
4 Stycznia 2025
4 Stycznia 2025
4 Stycznia 2025
Instrukcje klimatyzacja
- klimatyzacja Telefunken
- klimatyzacja Furrion
- klimatyzacja MPM
- klimatyzacja Sonnenkönig
- klimatyzacja Guzzanti
- klimatyzacja LERAN
- klimatyzacja Universal Blue
- klimatyzacja Wood's
- klimatyzacja American Comfort
- klimatyzacja Master
- klimatyzacja Avalon Bay
- klimatyzacja Kärcher
- klimatyzacja Haier
- klimatyzacja Omega Altise
- klimatyzacja Orbegozo
Najnowsze instrukcje dla klimatyzacja
9 Kwietnia 2025
9 Kwietnia 2025
9 Kwietnia 2025
9 Kwietnia 2025
9 Kwietnia 2025
9 Kwietnia 2025
9 Kwietnia 2025
9 Kwietnia 2025
9 Kwietnia 2025
9 Kwietnia 2025