Instrukcja obsługi Lorex ECP-01R

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Lorex ECP-01R (2 stron) w kategorii nieskategoryzowany. Ta instrukcja była pomocna dla 20 osób i została oceniona przez 8 użytkowników na średnio 4.3 gwiazdek

Package

ECP-01T (Transmitter)

ECP-01R (Receiver)

Quick Start

Guide

Hardware Overview

Ri tgh

Left

Top

RJ45

Status LED Indicator

LINK

Status LED Indicator

ACT

DC Power JackBNC connector

PoE Switch ON/OF

(ECP-01T only)

Mounting

Screw Hole

Mounting

Screw Hole

Overview

ECP-01 Series are High-Speed, long distance Ethernet & PoE extender

that makes possible to transmit the Ethernet signal and PoE up to

400m through coaxial cables in different situations.

It is cost-effective and time saving solution to migrate existing

analog system to IP based system since ECP-01 series support easy

installation utilizing the existing coaxial cable.

With long distance transmission feature, the device makes to

overcome 100 meters distance limitation easily and reduces the

construction cost significantly compared with fiber optic configuration.

Features

Long reach Ethernet & PoE extension over existing coaxial cable

Data + Power over coaxial cable

Data distance up to 1000 m

100Mpbs Full Duplex

PoE, PoE+, Extra PoE (Max. 60W PoE output, ECP-01T model only

with DC Power adapter)

LED Indication (Data, Power)

Plug & Play

Support PoE, PoE+ Input (25.5W) from PoE Switch / PoE NVR

(ECP-01R model only)

Slim design

Quick Start Guide

ECP-01T / ECP-01R

Please read carefully the instruction manual before use.

Contents of this manual are subject to change without prior notice

for reasons such as functionality enhancements.

Installation Guide

1. Connect Ethernet cable (Cat5e or better) from PoE Switch/NVR to

ECP-01R. Check LEDs on ECP-01R.

Ethernet cable

(Cat5e or better)PoE Switch/NVR

Check LEDs

2. Connect coaxial cable (RG59 or better) to ECP-01R.

Connect coaxial cable from ECP-01R to ECP-01T.

Coaxial cable

(RG59 or better)

3. Connect Ethernet cable (Cat5e or better) from ECP-01T to IP

Camera (PoE Model Only). Check LEDs on ECP-01T.

Î

Set ECP-01T, PoE Switch ON to supply direct power to IP camera.

Set ECP-01T, PoE Switch OFF to connect PC or network switch

devices.

Ethernet cable

(Cat5e or better)

Check LEDs

LED Indicators

Indicator ColorFunction

LINKEthernet Data Act

ACTEthernet Connect Act

Rev.6.7

Specyfikacje produktu