Instrukcja obsługi Louroe Electronics AOP-SP-PB
Louroe Electronics
Interkom
AOP-SP-PB
Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Louroe Electronics AOP-SP-PB (4 stron) w kategorii Interkom. Ta instrukcja była pomocna dla 21 osób i została oceniona przez 11 użytkowników na średnio 5.0 gwiazdek
Strona 1/4
DESCRIPTION
AOPSP-PB
PLASTIC BACKBOX
(FLUSH MOUNT)
METAL BACKBOX
(SURFACE MOUNT)
OPERATIONS
Model AOPSP-PB is a wall mount two-way call stations containing a built-in line level electret condenser microphone, a
4” speaker and a 5/8 vandal resistant call button. It is designed to interface with various modes of audio/video
transmission systems such as:
IP Network Cameras
DVR’s
Video Servers
PC Soundcards
Provided with the unit are two back boxes for either flush or surface mounting to a wall. Also, a built-in call button
provides switch closure activation with the receiving device. a 12Vdc power supply is included with the the unit.
The gain of the microphone and speaker are factory adjusted. If it is necessary to change the gain of either or both the
audio output of the microphone and speaker of the unit, it has to be done in small increments. For adjusting the gain of
the microphone, rotate clockwise to increase or counterclockwise to decrease, the potentiometer marked “MIC” slowly
until the desired level is attained. Somebody at the head-end has to listen to it while the adjustments are made. If the
microphone’s gain is too high, it will attenuate the audio output of the speaker. The output of the speaker will then be
cutting off as you talk. If this happens, rotate the potentiometer marked “MIC” slowly counterclockwise to decrease the
gain of the microphone until the talkback sound at the speaker no longer cuts off.
To adjust the audio output of the speaker, rotate the “SPKR” potentiometer clockwise (increase) or counterclockwise
(decrease) slowly until the desired loudness is attained. If the audio from the microphone starts to get low, rotate the
“SPKR” potentiometer counterclockwise a small increment at a time until the microphone audio becomes louder again.
This unit has a built-in muting system that if the microphone’s is too high it is going to mute the speaker and vice versa.
aopsp-pb_inst 3/15
Page 1 of 4
AOPSP-PB
SPEAKERPHONE WITH CALL BUTTON
INSTALLATION AND OPERATING INSTRUCTIONS
6955 VALJEAN AVE, VAN NUYS, CA 91406
PH: (818)994-6498 / FAX: (818)994-6458
/ www.louroe.comtechsupport@louroe.com
®
Specyfikacje produktu
| Marka: | Louroe Electronics |
| Kategoria: | Interkom |
| Model: | AOP-SP-PB |
Potrzebujesz pomocy?
Jeśli potrzebujesz pomocy z Louroe Electronics AOP-SP-PB, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą
Instrukcje Interkom Louroe Electronics
10 Marca 2025
Instrukcje Interkom
- SilverCrest
- Comelit
- Hanwha
- Abus
- Steren
- Sygonix
- Chacon
- Axis
- Elcom
- DoorBird
- FlyingVoice
- Planet
- Estom
- Foscam
- DiO
Najnowsze instrukcje dla Interkom
28 Marca 2025
27 Marca 2025
27 Marca 2025
27 Marca 2025
27 Marca 2025
11 Marca 2025
2 Marca 2025
20 Lutego 2025
20 Lutego 2025
20 Lutego 2025