Instrukcja obsługi Luxul 10G-RJ45


Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Luxul 10G-RJ45 (6 stron) w kategorii Niesklasyfikowane. Ta instrukcja była pomocna dla 12 osób i została oceniona przez 6.5 użytkowników na średnio 4.6 gwiazdek

Strona 1/6
12988 S. Frontrunner Blvd, Ste 201, Draper, UT 84020-5490 | luxul.com | 801-822-5450
© 2018 Luxul. All Rights Reserved.
Other trademarks and registered trademarks are the property of their respective owners
LUX-QIG-SFP-Family-v6 0928180123
Fo ld Fo ld
Use the SFP Module to:
Extend the distance of connected devices
Provide connectivity between switches
Quick Install Guide
10G-CAB-05
Direct-Attach Cable 0.5m 10G Copper Passive
1G-MM-DX-LC
1G Multimode Fiber Duplex SFP Module
850nm VCSEL
10G-MM-DX-LC
10Gb Multimode Fiber Duplex SFP+ Module
850nm VCSEL
1G-RJ45
1000Base-T RJ-45 SFP Module
10G-RJ45
10GBase-T RJ-45 SFP+ Module
10G-SM-DX-LC
10Gb Single-mode Fiber Duplex SFP+ Module
1310nm DFB Laser
10G-SM-SX-LC
10Gb Single-mode Fiber Simplex SFP+ Module
1310nm/1270nm DFB Laser
4
w WARNING!: Grasp module by the sides to install or
remove from SFP ports. Do not use the cable.
w WARNING!: Pulling, bending, kinking, or twisting fiber
optic cable will cause damage to the cable.
w WARNING!: Put on an electrostatic discharge (ESD) wrist
strap and attach the clip end to a metal
surface (such as an equipment rack) to act
as ground during installation.
INSTALLATION
Remove the SFP Module from its protective packaging
Gently insert the SFP Module into the SFP port of the Luxul switch
until it clicks into place. The SFP Modules are keyed to prevent
incorrect insertion. A tab on the bottom of the SFP Module locks it
to the front panel of the switch
Remove the protective covering from the port connectors of the SFP
Module and store the covering for future use
The SFP Module is now ready to receive the compatible cable
n NOTE: SFP Modules are hot swappable.
n NOTE: When connecting to devices that will require a
SFP Module, the same module must be used on
both sides of the connection (EX. a 1G-RJ45 SFP
Module on one side of the connection requires
that a 1G-RJ45 is used on the other side of the
connection). The exception is the 10G-SM-SX-LC,
which comes as a pair of compatible modules—
one for each side of the connection.
SFP MODULES HARDWARE FEATURES
Module Type Cable Type Mode Interface
10G-CAB-05 Cable N/A N/A N/A
1G-RJ45
UTP/
STP
Cat.5e or
Cat.6/7
UTP/STP
N/A
RJ-45
10G-RJ45
Cat.6/7
UTP/ST
N/A
1G-MM-DX-LC
Optical
Fiber
Duplex Fiber Multi
LC
10G-MM-DX-LC Duplex Fiber Multi
10G-SM-DX-LC Duplex Fiber Single
10G-SM-SX-LC Simplex Fiber Single


Specyfikacje produktu

Marka: Luxul
Kategoria: Niesklasyfikowane
Model: 10G-RJ45

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Luxul 10G-RJ45, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje Niesklasyfikowane Luxul

Instrukcje Niesklasyfikowane

Najnowsze instrukcje dla Niesklasyfikowane

SmallRig

SmallRig VB99 SE Instrukcja

29 Stycznia 2025
QSC

QSC TSC-8 Instrukcja

29 Stycznia 2025
XTRARM

XTRARM XTR-FS5130 Instrukcja

29 Stycznia 2025
Sunding

Sunding SD-581G Instrukcja

29 Stycznia 2025
XTRARM

XTRARM XTR-FS5070 Instrukcja

29 Stycznia 2025
XTRARM

XTRARM XTR-FS2010 Instrukcja

29 Stycznia 2025
OSEE

OSEE TX402 Instrukcja

29 Stycznia 2025