Instrukcja obsługi Magellan ToughCase

Magellan Odbiornik GPS ToughCase

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Magellan ToughCase (5 stron) w kategorii Odbiornik GPS. Ta instrukcja była pomocna dla 38 osób i została oceniona przez 19.5 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF

Strona 1/5

Magellan® ToughCaseTM Instruction Booklet

• Rugged and Waterproof to IPX-7 standards.

• Internal Battery charges your iPhone® or iPod touch®.

• Built-in GPS receiver enhances the GPS reception for your iPhone and enables the iPod touch to use applications that require GPS

signals.

Made for:

iPhone 3GS, iPhone 3G, iPod touch (3rd generation), and iPod touch (2nd generation)

Specifications:

Waterproof: IPX-7

GPS: SiRFStar III

Antenna: Multidirectional Patch

Battery: Integrated, non-replaceable

Connectivity: Mini-USB

Headphone

Installing Your iPhone or iPod touch

Lift the locking flaps on both sides of the ToughCase GPS receiver and pivot the lid upwards. The Master Power switch (upper left side) is accessible when the lid is

open. Switch it to ON.

Connect your iPhone to the dock connector. If using an iPod touch, you need to place your iPod touch into the Sleeve (supplied) and then connect the assembly to

the dock connector.

Close the lid and hold the lid shut while snapping the locking flaps until you hear a ‘click’.

Turning the ToughCase GPS Receiver Off

The ToughCase GPS receiver can be turned off to prevent unnecessary battery drain while being stored or during travel.

Release the Locking Flaps and open the ToughCase GPS receiver. Remove your iPhone or iPod touch from the ToughCase GPS receiver. This reveals the Master

Power switch. Slide it to OFF to keep battery charge.

Setting the ToughCase Power Mode

The ToughCase GPS receiver has four power modes available; OFF/ON (described above), idle, battery

only, or battery+GPS.