Instrukcja obsługi Makita DLS600Z

Makita Maszyna do piłowania DLS600Z

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Makita DLS600Z (28 stron) w kategorii Maszyna do piłowania. Ta instrukcja była pomocna dla 13 osób i została oceniona przez 7 użytkowników na średnio 4.8 gwiazdek

Pobierz PDF

Strona 1/28

INSTRUCTION MANUAL

Cordless Compound Miter Saw

DLS600

ENGLISH: Original instructions

Read before use.

2 ENGLISH

SPECIFICATIONS

Model: DLS600

Blade diameter 165 mm

Hole (arbor) diameter 20 mm

Max. miter angle Left 52°, Right 52°

Max. bevel angle Left 45° (46° when using release lever),

Right 45° (46° when using release lever)

No load speed 5,000 min-1

Laser type

Red Laser 650 nm, Maximum output 1.6mW ( Laser Class 2M )

Dimensions (L x W x H) 340 mm x 400 mm x 440 mm

Rated voltage D.C. 18 V

Standard battery cartridge BL1815N / BL1820 / BL1820B / BL1830 / BL1830B / BL1840 /

BL1840B / BL1850 / BL1850B / BL1860B

Charger DC18RC / DC18RD / DC18SD / DC18SE / DC18SF

Net weight 6.3 - 6.6 kg

Max. Cutting capacities (H x W) with blade 165 mm

Miter angle Bevel angle

45° (left) 45° (right)0°

0° 30 mm x 92 mm 46 mm x 92 mm 15 mm x 92 mm

45° (left and right) 30 mm x 65 mm 46 mm x 65 mm 15 mm x 65 mm

• Duetoourcontinuingprogramofresearchanddevelopment,thespecicationshereinaresubjecttochange

without notice.

• Specicationsandbatterycartridgemaydifferfromcountrytocountry.

• Theweightmaydifferdependingontheattachment(s),includingthebatterycartridge.Thelightestandheavi-

estcombination,accordingtoEPTA-Procedure01/2014,areshowninthetable.

Symbols

Thefollowingshowthesymbolsusedfortheequip-

ment. Be sure that you understand their meaning before

use.

Read instruction manual.

Toavoidinjuryfromyingdebris,keep

holding the saw head down, after making

cuts, until the blade has come to a com-

plete stop.

Donotplacehandorngersclosetothe

blade.

Never look into the laser beam. Direct laser

beammayinjureyoureyes.

Ni-MH

Li-ion

Only for EU countries

Donotdisposeofelectricequipmentor

battery pack together with household waste

material!

In observance of the European Directives,

on Waste Electric and Electronic

EquipmentandBatteriesandAccumulators

andWasteBatteriesandAccumulators

and their implementation in accordance

withnationallaws,electricequipmentand

batteries and battery pack(s) that have

reached the end of their life must be col-

lected separately and returned to an envi-

ronmentally compatible recycling facility.

Intended use

Thetoolisintendedforaccuratestraightandmiter

cutting in wood. With appropriate saw blades, aluminum

can also be sawed.

Do not use the saw to cut other than wood, aluminum or

similar materials.

Noise

ThetypicalA-weightednoiseleveldeterminedaccord-

ing to EN62841:

Sound pressure level (L

pA):90dB(A)

Sound power level (L

WA):97dB(A)

Uncertainty(K):3dB(A)

WARNING: Wear ear protection.

Vibration

Thevibrationtotalvalue(tri-axialvectorsum)deter-

mined according to EN62841:

Vibration emission (a

h) : 2.5 m/s2 or less

Uncertainty (K) : 1.5 m/s

NOTE:

Thedeclaredvibrationemissionvaluehasbeen

measured in accordance with the standard test method

and may be used for comparing one tool with another.

NOTE:

Thedeclaredvibrationemissionvaluemay

also be used in a preliminary assessment of exposure.

3 ENGLISH

WARNING:Thevibrationemissionduringactual

use of the power tool can differ from the declared

emission value depending on the ways in which the

tool is used.

WARNING: Be sure to identify safety measures

to protect the operator that are based on an estima-

tion of exposure in the actual conditions of use (taking

account of all parts of the operating cycle such as

the times when the tool is switched off and when it is

running idle in addition to the trigger time).

EC Declaration of Conformity

For European countries only

TheECdeclarationofconformityisincludedasAnnexA

to this instruction manual.

SAFETY WARNINGS

General power tool safety warnings

WARNING: Read all safety warnings, instruc-

tions, illustrations and specications provided

with this power tool. Failure to follow all instructions

listedbelowmayresultinelectricshock,reand/or

seriousinjury.

Save all warnings and instruc-

tions for future reference.

Theterm"powertool"inthewarningsreferstoyour

mains-operated (corded) power tool or battery-operated

(cordless) power tool.

Work area safety

1. Keep work area clean and well lit. Cluttered or

dark areas invite accidents.

2. Do not operate power tools in explosive atmo-

spheres, such as in the presence of ammable

liquids, gases or dust. Power tools create sparks

which may ignite the dust or fumes.

3. Keep children and bystanders away while

operating a power tool. Distractions can cause

you to lose control.

Electrical Safety

1. Power tool plugs must match the outlet. Never

modify the plug in any way. Do not use any

adapter plugs with earthed (grounded) power

tools. Unmodiedplugsandmatchingoutletswill

reduce risk of electric shock.

2. Avoid body contact with earthed or grounded

surfaces, such as pipes, radiators, ranges and

refrigerators.Thereisanincreasedriskofelec-

tric shock if your body is earthed or grounded.

3. Do not expose power tools to rain or wet con-

ditions. Water entering a power tool will increase

the risk of electric shock.

4. Do not abuse the cord. Never use the cord for

carrying, pulling or unplugging the power tool.

Keep cord away from heat, oil, sharp edges

or moving parts. Damaged or entangled cords

increase the risk of electric shock.

5. When operating a power tool outdoors, use an

extension cord suitable for outdoor use. Use of

a cord suitable for outdoor use reduces the risk of

electric shock.

6. If operating a power tool in a damp location

is unavoidable, use a residual current device

(RCD) protected supply. Use of an RCD reduces

the risk of electric shock.

7. Power tools can produce electromagnetic

elds (EMF) that are not harmful to the user.

However, users of pacemakers and other similar

medical devices should contact the maker of their

device and/or doctor for advice before operating

this power tool.

Personal Safety

1. Stay alert, watch what you are doing and use

common sense when operating a power tool.

Do not use a power tool while you are tired or

under the inuence of drugs, alcohol or med-

ication.Amomentofinattentionwhileoperating

powertoolsmayresultinseriouspersonalinjury.

2. Use personal protective equipment. Always

wear eye protection.Protectiveequipmentsuch

as a dust mask, non-skid safety shoes, hard hat or

hearing protection used for appropriate conditions

willreducepersonalinjuries.

3. Prevent unintentional starting. Ensure the

switch is in the off-position before connecting

to power source and/or battery pack, picking

up or carrying the tool. Carrying power tools with

yourngerontheswitchorenergisingpowertools

that have the switch on invites accidents.

4. Remove any adjusting key or wrench before

turning the power tool on.Awrenchorakeyleft

attached to a rotating part of the power tool may

resultinpersonalinjury.

5. Do not overreach. Keep proper footing and

balance at all times.Thisenablesbettercontrol

of the power tool in unexpected situations.

6. Dress properly. Do not wear loose clothing or

jewellery. Keep your hair and clothing away

from moving parts.Looseclothes,jewelleryor

long hair can be caught in moving parts.

7. If devices are provided for the connection of

dust extraction and collection facilities, ensure

these are connected and properly used. Use of

dust collection can reduce dust-related hazards.

8. Do not let familiarity gained from frequent use

of tools allow you to become complacent and

ignore tool safety principles.Acarelessaction

cancausesevereinjurywithinafractionofa

second.

9. Always wear protective goggles to protect

your eyes from injury when using power tools.

The goggles must comply with ANSI Z87.1 in

the USA, EN 166 in Europe, or AS/NZS 1336

in Australia/New Zealand. In Australia/New

Zealand, it is legally required to wear a face

shield to protect your face, too.

Specyfikacje produktu

Marka:	Makita
Kategoria:	Maszyna do piłowania
Model:	DLS600Z

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Makita DLS600Z, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą

Twoje imię*

Twój email*

Napisz tutaj swoje pytanie

Instrukcje Maszyna do piłowania Makita

Makita DPC6430 Instrukcja

1 Kwietnia 2025

Makita DCS4610 Instrukcja

1 Kwietnia 2025

Makita DCS431 Instrukcja

1 Kwietnia 2025

Makita DCS430 Instrukcja

1 Kwietnia 2025

Makita EK6101 Instrukcja

1 Kwietnia 2025

Makita DCS6401 Instrukcja

1 Kwietnia 2025

Makita DCS340 Instrukcja

29 Marca 2025

Makita DPB181 Instrukcja

29 Marca 2025

Makita DPC7301 Instrukcja

29 Marca 2025

Makita DPC6401 Instrukcja

29 Marca 2025

Instrukcje Maszyna do piłowania

Najnowsze instrukcje dla Maszyna do piłowania

Bavaria By Einhell BHS 66 Instrukcja

3 Kwietnia 2025

Bavaria By Einhell BPS 600 E Instrukcja

3 Kwietnia 2025

Genesis GMCS140 Instrukcja

1 Kwietnia 2025

Kraftronic KT-ST 550 Instrukcja

29 Marca 2025

Kraftronic KT-US 650 Instrukcja

29 Marca 2025

Kraftronic KT-HK 1250 Instrukcja

29 Marca 2025

Kraftronic KT-HK 1410 Instrukcja

29 Marca 2025

Topex 16B282 Instrukcja

29 Marca 2025

Ribimex PRS499 Instrukcja

29 Marca 2025

Stanley Fatmax SFMCCS630 Instrukcja

29 Marca 2025