Instrukcja obsługi Martin THRILL Compact PAR 64 LED
Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Martin THRILL Compact PAR 64 LED (3 stron) w kategorii Ulga. Ta instrukcja była pomocna dla 15 osób i została oceniona przez 8 użytkowników na średnio 4.8 gwiazdek
Strona 1/3
THRILL Compact PAR 64 LED
User Guide
WARNING!
Read the Safety and Installation Guide
supplied with this product before
installing or using this product.
Fixture overview
1
Multi-function bracket
7
AC Mains out
2
LED emitters
8
DMX In
3
Hand wheel
9
Secondary attachment point
4
IR receiver
10
User interface
5
AC Mains in
11
DMX Out
6
Microphone
12
Clamp attachment point
Using the control menu
The control menu is shown below. To
access the menu, press the MENU
button. Scroll through options with the ▼
(down) and ▲ (up) buttons. Press ENTER to select an option.
To return to a higher level in the menu, press MENU. To exit the
menu, press and hold MENU or wait a few seconds.
The default menu settings are shown in . bold
Menu
Sub-menu
Explanation
Set DMX address
Select 6-channel DMX mode
Select 9-channel DMX mode
Set xtures Client
Set Master xture
Show mode o
Select preprogrammed show.
Select auto-trigger speed from
1-8
Toggle sound activation on/o
Set microphone sensitivity
Black out if DMX lost
Run stand-alone show mode
Hold last values if no DMX
Toggle display on/o
Inverted/normal display
Manual mode, select eect and
set level from 0 to 255.
Run xture test routine
Readout xture hours
Readout rmware version
Reset to default values
DMX mode operation and settings
DMX channel mode ( )
The Compact PAR 64 LED has 2 DMX modes that use 6 or 9
channels. The 6-channel mode provides color mixing with 0-100%
control of each color: red, blue green, amber, white, and UV.
In 9-channel mode, the Compact PAR 64 LED provides color
mixing, 36 popular preset colors, full-range dimming, and strobe
effects. The DMX command tables list all functions and their values.
To set 6-channel or 9-channel DMX mode:
1. Press MENU to enter the control menu.
2. Scroll to . Press ENTER to conrm.
3. orScroll to the desired mode: .
4. Press ENTER to save your selection.
DMX address ( )
A DMX controller uses either 6 or 9 DMX channels to control the
Compact PAR 64 LED. The DMX address is the rst channel
used. If xtures are set to 6-channel DMX mode and the rst
xture’s DMX address is set to 1, then it receives instructions on
DMX channels 1, 2, 3, 4, 5, and 6. The next xture could then
be set to a DMX address of 7.
For independent control, each xture must have its own unique
control channels. For symmetric control, identical xtures can be
set to the same DMX address.
Assign an address for the xture on the DMX controller. Then set
that address on the Compact PAR 64 LED as follows:
1. Press MENU to enter the control menu.
2. Scroll to . Press ENTER.
3. Scroll to the address that you assigned to the xture.
4. Press ENTER to save the address.
DMX state ( )
The xture runs in DMX mode whenever it receives DMX
signals. When there is no DMX signal, the xture can be set to
run in Show Mode ( ), black out ( or hold the last ),
DMX values received ( ). For Show Mode operation, DMX
state must be set to
.
To select behavior when there is no DMX signal:
1. Select in the control menu and press ENTER.
2. Select the desired behavior: , or .,
3. Press ENTER to save your selection.
DMX commands, 6-Channel Mode
Ch.
Value
Function
1
0-255
Red 0- 100%
2
0-255
Green 0- 100%
3
0-255
Blue 0- 100%
4
0-255
Amber 0- 100%
5
0-255
White 0- 100%
6
0-255
UV 0- 100%
DMX commands, 9-Channel Mode
Ch.
Value
Function
1
0-7
8-15
16-131
132 139-
140 181-
182 189-
190 231-
232 239-
240 247-
248 255-
Shutter
Closed
Open
Strobe, slow to fast
Open
Pulse, fast close/slow open
Open
Pulse, slow close/fast open
Open
Random strobe
Open
2
0-255
Dimmer, intensity 0- 100%
3
0-255
Red, intensity 0- 100%
4
0-255
Green, intensity 0-100%
5
0-255
Blue, intensity 0-100%
6
0-255
Amber, 0-100%
7
0-255
White, 0-100%
8
0-255
UV, 0-100%
9
0-10
11 15-
16 20-
21 25-
26 30-
31 35-
36 40-
41 45-
46 50-
51 55-
56 60-
61 65-
66-70
71 75-
76 80-
81 85-
86 90-
91 95-
96 100-
101 105-
106 110-
111 115-
116 120-
121 125-
126 130-
131 135-
136 140-
141 145-
146 150-
Color presets
O
Color 1
Color 2
Color 3
Color 4
Color 5
Color 6
Color 7
Color 8
Color 9
Color 10
Color 11
Color 12
Color 13
Color 14
Color 15
Color 16
Color 17
Color 18
Color 19
Color 20
Color 21
Color 22
Color 23
Color 24
Color 25
Color 26
Color 27
Color 28
Ch.
Value
Function
151 155-
156 160-
161 165-
166 170-
171 175-
176 180-
181 185-
186 190-
191 192-
193 214-
215 221-
222 243-
244 247-
248 251-
252 255-
Color 29
Color 30
Color 31
Color 32
Color 33
Color 34
Color 35
Color 36
O (no preset color)
Continuous color scroll, fast to slow
Color scroll stop
Reverse color scroll, slow to fast
Random colors, fast
Random colors, medium
Random colors, slow
Show mode operation and settings
Show mode lets you run a standalone light show without a DMX
controller. Shows can be triggered by sound, or automatically
triggered at eight speeds.
To enable Show Mode operation, set the DMX state setting to
.
Show selection ( )
Four shows are available. To select a preprogrammed show:
1. Press MENU to enter the control menu.
2. Scroll to and press ENTER.
3. Select and press ENTER.
4. Select a show from to , or select to disable
Show Mode. Press ENTER.
Music trigger ( and )
The fixture’s built-in microphone triggers eect and color
changes in sync with music. To enable sound activation:
1. Select in the control menu and press ENTER.
2. Select to enable sound activation or to disable it.
3. Press ENTER to save your selection.
To adjust microphone sensitivity for the volume of the music:
1. Turn on the music source and set it to the desired volume.
2. Select in the control menu and press ENTER.
3. Press ▼ or ▲ to decrease or increase the sensitivity level.
4. When the xture responds as desired, press ENTER.
Auto trigger speed ( )
To use auto trigger in Show Mode:
1. Turn o sound activation as described above.
2. Select in the control menu and press ENTER.
3. Scroll to . Press ENTER.
4. Select a trigger speed from 1 (slow) to 8 (fast). Press ENTER.
Master/client mode operation and settings
Up to 32 Compact PAR 64 LEDs can be linked in a chain and set to
master/ operation, where the rst Compact PAR 64 LED in client
the chain is set to operate as the “master” that controls the others.
This provides synchronized operation without a controller. Note:
There must be no one the chain.more than master in Set all
other connected xtures to operate . as clients
To the xture be master: set rst to the
1. Enter the and scroll Press control menu to . ENTER.
2. Scroll Press to . ENTER.
3. Set show as described mode options above.
To other xtures as :set clients
1. Enter the and scroll Press control menu to . ENTER.
2. Scroll Press to . ENTER.
Link the master and xtures in a chain, using DMX cable toclient
connect each fixture’s DMX OUT socket to the next fixture’s
DMX IN socket as described in the Safety and Installation Guide.
1
2
4
7
3
5
6
9
11
12
10
8
Specyfikacje produktu
| Marka: | Martin |
| Kategoria: | Ulga |
| Model: | THRILL Compact PAR 64 LED |
Potrzebujesz pomocy?
Jeśli potrzebujesz pomocy z Martin THRILL Compact PAR 64 LED, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą
Instrukcje Ulga Martin
28 Grudnia 2024
30 Września 2024
24 Września 2024
24 Września 2024
24 Września 2024
24 Września 2024
23 Września 2024
23 Września 2024
22 Września 2024
22 Września 2024
Instrukcje Ulga
- MeLiTec
- Mr. Beams
- Busch + Müller
- Dainolite
- Bigben
- IFM
- ILive
- Porter-Cable
- Ledlenser
- Sharper Image
- Denver
- LightPro
- SolarlampKoning
- DeSisti
- Elro
Najnowsze instrukcje dla Ulga
9 Kwietnia 2025
8 Kwietnia 2025
8 Kwietnia 2025
8 Kwietnia 2025
8 Kwietnia 2025
7 Kwietnia 2025
5 Kwietnia 2025
5 Kwietnia 2025
5 Kwietnia 2025
5 Kwietnia 2025