Instrukcja obs艂ugi Maxx Cold MCR-49FD
Przeczytaj poni偶ej 馃摉 instrukcj臋 obs艂ugi w j臋zyku polskim dla Maxx Cold MCR-49FD (16 stron) w kategorii lod贸wka. Ta instrukcja by艂a pomocna dla 16 os贸b i zosta艂a oceniona przez 8.5 u偶ytkownik贸w na 艣rednio 4.9 gwiazdek
Strona 1/16
Installation and Operation Guide
For
MCF-49FD, MCF-23FD
MCR-49FD, MCR-23FD
CONTENTS
SPECIFICATIONS
SERIAL NUMBER
1. SPECIFICATIONS
2. SERIAL NUMBER
3. INSTALLATION
4. CLEANING
5. CAUTION
6. BASIC OPERATION
6-1. REFRIGERATOR
6-2. FREEZER
7. REVERSIBLE DOOR ASSEMBLING METHOD
8. TROUBLE SHOOTING GUIDE
The serial number is located on the rating label which is on the left interior wall.
Please retain the unit's serial number for service purposes.
2
2
3
4
4
5 - 6
7 - 8
9 -10
11
Solid Door Refrigerators
MODEL COMP. H.P REFRIGERANT AMPERAGE POUNDS
MCR-23FD 1/3 R-134a 420W 271
MCR-49FD 1/2 R-134a 570W 370
Solid Door Freezers
MODEL COMP. H.P REFRIGERANT AMPERAGE POUNDS
MCF-23FD 1/3 R-134a 440W 284
MCF-49FD 1/2 R-404A 1340W 403
INSTALLATION
1. GOOD AIR CIRCULATION
- Be sure to avoid any object which will restrict exhausted air flow.
- Be sure that there is ample space so that air can flow through the rear of the unit.
- The back of the unit should be located no less than 5 inches from the wall.
2. PLACE ON STRONG GROUND
- Be sure the location chosen has a floor strong enough to support the total weight of the
cabinet and contents.
3. DO NOT PLACE NEAR HEAT SOURCE
- Be sure to avoid hot corner or location near stove, oven, or other heat source.
- High ambient temperature will make cooling efficiency lower.
4. INDOOR USAGE ONLY
- This equipment is intended for indoor use only.
5. STABILIZING
- Make sure the unit is installed in a stable condition with the front wheels locked while in
use.
6. LEVELING
- Be sure that the unit is level from front to back and side to side.
7. Unit should be on dedicated electrical circuit.
- Do not use extension cords
- Isolate the unit on an electrical circuit of proper size.
8. Place black plastic condensate pan thru back or front.
Make sure pads are installed upwards and drain hose is in pan.
Specyfikacje produktu
| Marka: | Maxx Cold |
| Kategoria: | lod贸wka |
| Model: | MCR-49FD |
Potrzebujesz pomocy?
Je艣li potrzebujesz pomocy z Maxx Cold MCR-49FD, zadaj pytanie poni偶ej, a inni u偶ytkownicy Ci odpowiedz膮
Instrukcje lod贸wka Maxx Cold
2 Wrze艣nia 2024
2 Wrze艣nia 2024
Instrukcje lod贸wka
- lod贸wka Lec
- lod贸wka Corona
- lod贸wka Westinghouse
- lod贸wka Paulmann
- lod贸wka Les Petits Champs
- lod贸wka Amica
- lod贸wka Sub-Zero
- lod贸wka Juno-electrolux
- lod贸wka Haeger
- lod贸wka Consul
- lod贸wka DCG
- lod贸wka Atag
- lod贸wka Hestan
- lod贸wka Sauber
- lod贸wka Fisher & Paykel
Najnowsze instrukcje dla lod贸wka
9 Kwietnia 2025
9 Kwietnia 2025
9 Kwietnia 2025
9 Kwietnia 2025
9 Kwietnia 2025
9 Kwietnia 2025
9 Kwietnia 2025
9 Kwietnia 2025
8 Kwietnia 2025
8 Kwietnia 2025