Instrukcja obsługi Microchip HV852DB1


Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Microchip HV852DB1 (2 stron) w kategorii nieskategoryzowany. Ta instrukcja była pomocna dla 12 osób i została oceniona przez 6.5 użytkowników na średnio 4.7 gwiazdek

Strona 1/2
Supertex inc.
Supertex inc.
www.supertex.com
HV852DB1
Doc.# DSDB-HV852DB1
A032813
The Supertex HV852DB1 demoboard contains all necessary
circuitry to demonstrate the features of the HV852 EL lamp
driver.
Simply connect it to a power supply and a lamp, as shown
below. For additional assistance in implementation of the
HV852 circuit, please refer to the HV852 data sheet.
High Voltage, Low Noise,
Inductorless EL Lamp Driver Demoboard
Parameter Value
VDD input voltage: 2.4 to 5.0V
Supply current: 25mA
Lamp size: 1.5in2
Lamp frequency: 245Hz
Connections:
EN - Enable Input
Enables/Disables the lamp driver. Logic high (VDD), enables
the driver, and a logic low (GND), disables the driver. This
input may be connected to a mechanical switch, or to a logic
circuit output.
VDD - IC Supply
Supplies the HV852 EL driver IC. The supplied circuit is
optimized for 2.4 to 5.0V operation.
VA
and VB - Lamp Connections
Connects to an EL lamp. Polarity is irrelevant.
GND - Circuit Ground
Connect to VDD negative terminals. Supply bypass capacitor
for VDD is provided on the demo board. External supply
bypass capacitors are not necessary.
CLKEN - Clock Enable
To use external clock for setting the EL lamp frequency, this
pin will need to be connected to VDD. To set the lamp frequency
via REL, this pin will need to be connected to GND.
CLKIN - Logic Input
An external logic clock applied to this pin can be used to set
the EL lamp frequency. When using external clock signal,
REL
will need to be removed, and REL pin will need to be
connected to GND. CLKEN will need to be connected to V DD
when an external clock signal is used. Connect both CLK EN
and CLKIN to GND when not in use.
General Description Specications
Board Layout and Connection Diagram
GND
CLKIN
EN
VDD VA
VB
CLKEN
REL CDD
HV852DB1
HV852
Actual Dimensions: 13mm x 8.0mm


Specyfikacje produktu

Marka: Microchip
Kategoria: nieskategoryzowany
Model: HV852DB1

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Microchip HV852DB1, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje nieskategoryzowany Microchip

Instrukcje nieskategoryzowany

Najnowsze instrukcje dla nieskategoryzowany

Asko

Asko DBI644MIB.S.TW/1 Instrukcja

28 Października 2024
Asko

Asko DFS233IB.S.TW/1 Instrukcja

28 Października 2024
Emko

Emko EZM-9920 Instrukcja

27 Października 2024
Emko

Emko ESM-3712-H Instrukcja

27 Października 2024
Emko

Emko ATS-10 Instrukcja

27 Października 2024
Emko

Emko EAOM-11.2 Instrukcja

27 Października 2024
Emko

Emko EPM-3790 Instrukcja

27 Października 2024
Emko

Emko EPM-7790 Instrukcja

27 Października 2024
Livarno Lux

Livarno Lux IAN 108340 Instrukcja

27 Października 2024
Livarno Lux

Livarno Lux HG06009A-BS Instrukcja

27 Października 2024