Instrukcja obsługi Microchip SR086


Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Microchip SR086 (16 stron) w kategorii nieskategoryzowany. Ta instrukcja była pomocna dla 5 osób i została oceniona przez 3 użytkowników na średnio 4.5 gwiazdek

Strona 1/16
2017 Microchip Technology Inc. DS20005544A-page 1
SR086/SR087
Features
Efficient Operation without Magnetics
No High-voltage Capacitors
Adjustable Main Output Voltage (9V to 50V)
Additional Internal Linear Regulator:
- 3.3V for SR086
- 5V for SR087
Up to 100 mA Combined Output Current
Single BOM for 120 VAC/230 VAC
Built-in Soft Start
Less than 200 mW Standby Power
Applications
White Goods
Household Appliances
Lighting Controls
Circuit Breakers
Keep-alive Supplies
General Description
The SR086/SR087 are inductorless switching
regulators designed to operate directly from a rectified
AC line. The operating principle is to turn on a pass
transistor when the rectified AC is below the output
voltage and to turn it off when the output voltage
reaches a specific level. The ICs feature an adjustable
main output voltage of 9V to 50V and an additional
fixed output of 3.3V for SR086 and 5V for SR087.
Efficiencies of around 55% may be realized for loads
up to 1W in 120 VAC applications and about 50%
efficiencies for loads up to 800 mW in 230 VAC
applications.
A logic-level enable input allows the SR086/SR087 to
be disabled—useful when they are employed as
keep-alive power supplies.
Package Type
Backside on the SOIC package is at ground potential and may be connected to
ground or left unconnected. See Table 2-1 for pin information.
8-lead SOIC
(with Heat Slug)
(Top view)
1
2
3
4
8
7
6
5
VIN
EN
GND
VREG
GATE
VGD
VOUT
VFB
Heat Slug
WARNING
Galvanic isolation is not provided. Dangerous voltages are present when connected to the AC line. It is
the responsibility of the designer using the SR086/SR087 to ensure that adequate security measures are
in place to protect the end user from electrical shock.
The circuits shown in this data sheet are not guaranteed to meet surge and conducted EMI
requirements. The effectiveness of these circuits may vary with a particular application. The designer
must conduct tests to ascertain compliance with applicable standards and regulations.
Adjustable Offline Inductorless Switching Regulators


Specyfikacje produktu

Marka: Microchip
Kategoria: nieskategoryzowany
Model: SR086

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Microchip SR086, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje nieskategoryzowany Microchip

Instrukcje nieskategoryzowany

Najnowsze instrukcje dla nieskategoryzowany

Asko

Asko DBI644MIB.S.TW/1 Instrukcja

28 Października 2024
Asko

Asko DFS233IB.S.TW/1 Instrukcja

28 Października 2024
Emko

Emko EZM-9920 Instrukcja

27 Października 2024
Emko

Emko ESM-3712-H Instrukcja

27 Października 2024
Emko

Emko ATS-10 Instrukcja

27 Października 2024
Emko

Emko EAOM-11.2 Instrukcja

27 Października 2024
Emko

Emko EPM-3790 Instrukcja

27 Października 2024
Emko

Emko EPM-7790 Instrukcja

27 Października 2024
Livarno Lux

Livarno Lux IAN 108340 Instrukcja

27 Października 2024
Livarno Lux

Livarno Lux HG06009A-BS Instrukcja

27 Października 2024