Instrukcja obsługi Microchip TC1320
                    Microchip
                    
                    nieskategoryzowany
                    
                    TC1320
                
                                
    Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Microchip TC1320 (39 stron) w kategorii nieskategoryzowany. Ta instrukcja była pomocna dla 17 osób i została oceniona przez 9 użytkowników na średnio 4.3 gwiazdek
                        Strona 1/39
                    
                    
                    
 2000 Microchip Technology Inc. Preliminary DS00735A-page  1
INTRODUCTION
This application note describes the implementation of
the PICmicro MSSP module for Master I2C communi-
cations. The Master Synchronous Serial Port (MSSP)
module  is  the  enhanced  Synchronous  Serial  Port
developed by Microchip Technology and is featured on
many of the PICmicro devices. This module provides
for  both  the  4-mode  SPI  communications,  as  well  as
Master  and  Slave  I2C  communications,  in  hardware.
For information on the SPITM peripheral implementation
see the PICmicroTM Mid-Range MCU Family Reference
Manual, document DS33023. The MSSP module in I
2C
mode fully implements all Master and Slave functions
(including general call support) and provides interrupts
on START and STOP bits in hardware to determine a
free I2C bus (multi-master function). The MSSP module
implements the standard mode specifications, as well
as 7-bit and 10-bit addressing. Figure 1 depicts a func-
tional block diagram of the I2C Master mode. The appli-
cation code for this I2C example is developed for and
tested  on a  PIC16F873,  but  can  be  ported  over  to  a
PIC17CXXX  and  PIC18CXXX  PICmicro  MCU  which
features a MSSP module.
FIGURE 1:   I2C MASTER MODE BLOCK DIAGRAM     
Author: Richard L. Fischer
Microchip Technology Inc.
Read Write
SSPSR
START bit, STOP bit,
SSPBUF
Internal
Data Bus
Set/Reset, S, P, WCOL (SSPSTAT)
Shift
Clock
MSb LSb
SDA
Acknowledge
Generate
SCL
SCL In
Bus Collision
SDA In
Receive Enable
Clock cntl
Clock Arbitrate/WCOL Detect
(hold off clock source)
SSPADD<6:0>
Baud
Set SSPIF, BCLIF
Reset ACKSTAT, PEN (SSPCON2)
Rate
Generator
SSPM3:SSPM0
START bit detect
STOP bit detect
Write collision detect
Clock Arbitration
State counter for
end of XMIT/RCV
AN735
Using the PICmicro® MSSP Module for Master
I2CTM Communications
Specyfikacje produktu
| Marka: | Microchip | 
| Kategoria: | nieskategoryzowany | 
| Model: | TC1320 | 
Potrzebujesz pomocy?
Jeśli potrzebujesz pomocy z Microchip TC1320, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą
Instrukcje nieskategoryzowany Microchip
                        
                         5 Lipca 2024
                        
                    
                                                            
                        
                         5 Lipca 2024
                        
                    
                                                            
                        
                         5 Lipca 2024
                        
                    
                                                            
                        
                         5 Lipca 2024
                        
                    
                                                            
                        
                         5 Lipca 2024
                        
                    
                                                            
                        
                         5 Lipca 2024
                        
                    
                                                            
                        
                         5 Lipca 2024
                        
                    
                                                            
                        
                         5 Lipca 2024
                        
                    
                                                            
                        
                         5 Lipca 2024
                        
                    
                                                            
                        
                         5 Lipca 2024
                        
                    
                                                            Instrukcje nieskategoryzowany
- Fosi Audio
- Yato
- Adam Hall
- Ninja
- Eta
- CSL
- Artecta
- Princeton Tec
- LD Systems
- JIMMY
- Rollei
- Black & Decker
- GVM
- Megger
- Yuer
Najnowsze instrukcje dla nieskategoryzowany
                        
                         28 Października 2024
                        
                    
                                                            
                        
                         28 Października 2024
                        
                    
                                                            
                        
                         27 Października 2024
                        
                    
                                                            
                        
                         27 Października 2024
                        
                    
                                                            
                        
                         27 Października 2024
                        
                    
                                                            
                        
                         27 Października 2024
                        
                    
                                                            
                        
                         27 Października 2024
                        
                    
                                                            
                        
                         27 Października 2024
                        
                    
                                                            
                        
                         27 Października 2024
                        
                    
                                                            
                        
                         27 Października 2024