Instrukcja obsługi Monitor Audio AirStream WS100
Monitor Audio
głośnik
AirStream WS100
Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Monitor Audio AirStream WS100 (8 stron) w kategorii głośnik. Ta instrukcja była pomocna dla 12 osób i została oceniona przez 6.5 użytkowników na średnio 3.8 gwiazdek
Strona 1/8
U S E R M A N U A L
Contents
Introduction
The WS100 speakers are built for listeners not network engineers. A wire-free connection to any computer - desktop or laptop, Mac or
PC - is performed via the supplied USB dongle transmitter, which congures automatically without the need for further software.
Each active speaker has been optimised to deliver the best audio experience possible from such a space-ecient system. Excellent
acoustic design is dovetailed with advanced wireless architecture to maintain a clear signal path from source to speaker, free of the
distortion that limits the enjoyment of music.
Acting on the output from a high quality integrated DAC in each speaker, an advanced DSP provides lter and correction algorithms
specically trimmed to match each driver’s response. The drivers are directly fed by individual, custom-tuned Class D hi- ampliers.
There are no losses and no phase errors in the signal path, ensuring that the full 60 watts of power from the system is used to maximum
eect.
A further crucial element in the WS100 chemistry is Monitor Audio’s use of SKAA™ wireless transmission. SKAA uses proprietary HPX TM
compression that delivers CD-quality sound comparable to uncompressed audio systems. Operating in the 2.4GHz band, it protects
the audio signal from other networks with a patented Walking Frequency Diversity™ (WFD) technology, which uses sophisticated and
seamless channel-hopping to eliminate clicks, pops and dropouts.
Built for peerless ease of use, the WS100 operates with plug and play simplicity. Power up the speakers with a single mains connection
and plug the SKAA transmitter dongle in the nearest USB connection on the PC/ Mac. When in range of the transmitter (up to 10 metres)
as many as four WS100 systems will receive the same source. Further dongles will send pristine high delity audio from up to four
sources to the same WS100 system.
The stylish WS100 remote, shaped to t snugly in hand, will control power, play/pause, track up/down volume and input selection: the
3.5mm mini-jack input on the back of the WS100 will accept a wired connection from a MP3 player and other sound sources.
Contents 1
Introduction 1
SetUp 2
RemoteControl 2
UsingtheWS100 3
Cluster 3
GreenList 3
AuxiliaryInput 4
FAQ’s 4
Specications 5
TroubleShooting 6
The SKAATM wordmark and trademark are owned by Eleven Engineering
Inc.
www.SKAA.com
1
2
SetUp
The set up of the WS100’s is very straight forward and easy to do thanks to the SKAA wireless technology. Follow the simple steps below
to start enjoying outstanding quality music:
1. Place the speakers in the desired location.
2. With the computer turned on (and logged in if necessary), insert the USB dongle into a spare USB socket on the PC/ Mac. The
computer will say that it is installing device drivers. Do not play any music until the computer says the drivers have been installed
and the device is ready to use.
3. Connect the right hand speaker to the mains and join the two speakers together by connecting the umbilical lead from the left
speaker into the right.
4. When the LED on the front is illuminated red, press either of the volume buttons or the button on the remote. The white LED pshould
start to ash and the SKAA (rear) LED should be faint amber. If it is green, press either the g button on the remote, or both volume
buttons simultaniously on the right hand speaker.
5. When the transmitter and receiver have found each other, the LED on the front should be solid white and the LED on the rear will be
bright amber.
6. Start up your preferred media player and start enjoying your music.
If you run into any issues when setting up, please see the FAQ’s and Trouble Shooting Guide in this manual.
SKAA Button
Stand By Button
RemoteControl
Next Track Button
Play/ Pause Button
Previous track Button
Volume Up Button
Volume Down Button
Input Source Button
Rear of Right Hand Speaker
SKAA
LED
Aux
In
Power
In
Left Speaker
Connection
Specyfikacje produktu
| Marka: | Monitor Audio |
| Kategoria: | głośnik |
| Model: | AirStream WS100 |
Potrzebujesz pomocy?
Jeśli potrzebujesz pomocy z Monitor Audio AirStream WS100, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą
Instrukcje głośnik Monitor Audio
2 Lutego 2025
13 Stycznia 2025
11 Stycznia 2025
2 Stycznia 2025
18 Grudnia 2024
16 Grudnia 2024
8 Października 2024
8 Października 2024
7 Października 2024
7 Października 2024
Instrukcje głośnik
- głośnik Skytec
- głośnik Marmitek
- głośnik Avante
- głośnik Trettitre
- głośnik Metra
- głośnik Panasonic
- głośnik Omnitronic
- głośnik Ultimate Ears
- głośnik Lexon
- głośnik TRENDnet
- głośnik HiKOKI
- głośnik Harley Benton
- głośnik OK
- głośnik Montarbo
- głośnik Heco
Najnowsze instrukcje dla głośnik
8 Kwietnia 2025
8 Kwietnia 2025
8 Kwietnia 2025
7 Kwietnia 2025
7 Kwietnia 2025
7 Kwietnia 2025
5 Kwietnia 2025
3 Kwietnia 2025
3 Kwietnia 2025
3 Kwietnia 2025