Instrukcja obsługi Mount-It! MI-307


Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Mount-It! MI-307 (5 stron) w kategorii wsporniki paneli mieszkaniowych. Ta instrukcja była pomocna dla 16 osób i została oceniona przez 8.5 użytkowników na średnio 4.8 gwiazdek

Strona 1/5
ULTRA-SLIM & HEAVY-DUTY
TV WALL MOUNT
MI-307
Please scan this QR code
to visit the product page.
Thank you for choosing Mount-It
2
Mount-It!
4
Use a stud finder to locate the center of the studs and hold Wall Mount(#A) to the wall in the desired
mounting location.
Place the Bubble Level (#D) centered on the top of the Wall Mount (#A) and ensure that the mount is level.
Mark the center of the studs through the mount as shown.
Remove the Mount from the wall and drill holes in the marked locations using a 3/16 drill bit (4.5mm) to
a depth of 2.2 (55mm).
Hold the Wall Mount (#A) to the wall over the holes, check the level once again, and install the 4 Lag
Screws (#W-A) and Washers (#W-C) then tighten until secure.
Wood Stud Installation Option
Step 1


Specyfikacje produktu

Marka: Mount-It!
Kategoria: wsporniki paneli mieszkaniowych
Model: MI-307

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Mount-It! MI-307, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje wsporniki paneli mieszkaniowych Mount-It!

Instrukcje wsporniki paneli mieszkaniowych

Najnowsze instrukcje dla wsporniki paneli mieszkaniowych