Instrukcja obsługi MuxLab 100503
MuxLab
Konwerter audio/wideo
100503
Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla MuxLab 100503 (2 stron) w kategorii Konwerter audio/wideo. Ta instrukcja była pomocna dla 11 osób i została oceniona przez 6 użytkowników na średnio 4.3 gwiazdek
Strona 1/2
© MuxLab Inc. 94-000919-A SE-000919-A
2321 Cohen St, Montreal, Quebec, Canada. H4R 2N7
Tel: (514) 905-0588 Fax: (514) 905-0589
Toll Free (North America): (877) 689-5228
E-mail: URL: www.muxlab.com info@muxlab.com
Specifications
Environment HDMI 1.3a (Supports the 3D feature of HDMI 1.4)
Devices DVD, plasma, projectors, monitors, TV, PC, laptops, servers
supporting HDMI.
Transmission Supports 1x1 point-to-point and up to 1x4 point-to-multipoint.
Transparent to the
user.
Bandwidth
165
MHz
Signals
HDMI 1.3a protocol
, HDCP
Connectors
Note: HDMI cables not
included.
Two (2) HDMI receptacle (for TX unit).
One (1) HDMI receptacle (for RX unit).
One (1) 3.5mm jack for IR sensor (for RX unit).
One (1) 2.5mm jack for IR emitter (for TX unit).
On
e (1) Mini USB Power Connector.
Switch
Push button for pairing
.
Latency
Less than 500msec
Compression
H.264
Bandwidth
Up to 15Mbps
Maximum Distance
Based on a maximum length
of 6.6ft (2m) of HDMI cable
per end.
Wireless transmission up to 100ft (30m) maximum, with line of sight
between TX & RX, at up to 1080p. Transmission through walls is
possible with reduced distance performance depending on wall
construction. For best performance avoid high density walls, such as
concrete and metal walls, as they may not allow the signal to be
transmitted through them, and place the TX & RX away from other
interfering
wireless
devices
.
IR Frequency
Wideband 3
0
KHz to
60
KHz
Power Supply One (1) 110-240V to 5VDC, 1A Micro USB power supply with
interchangeable blades
per HDMI Wireless Extender unit.
Power Consumption
Transmitter:
4.5
Watt
(Max)
Receiver:
3.5
Watt
(Max)
Temperature Operating: 0° to 40°C Storage: -20° to 85°C
Humidity: Up to 95% non
-
condensing
Enclosure
Plastic
D
imensions
3.3” x 3.3” x 0.5” (84
mm
x 84
mm x 13
m
m)
Weight
1
lb
s (0.45
kg)
Compliance
Regulatory: FCC, CE, RoHS
Flammability: 94V0
Warranty
1
year
Order Information
100503
HDMI Wireless Extender Kit
HDMI Wireless Extender Kit
100503
Quick Installation Guide
Overview
The HDMI Wireless Extender Kit (100503) allows HDMI equipment to be connected wirelessly up
to 100ft (30m) maximum, with line of sight between TX & RX, at up to 1080p in a point-to-point
configuration. In addition up to four Receivers may be paired with one Transmitter for point-to-
multipoint applications (Receivers may be purchased separately). Transmission through walls is
possible with reduced distance performance depending on wall construction. The Transmitter and
Receiver form a private wireless network between both units, and do not require a customer’s
router based wireless network to operate. The kit comes with one (1) Transmitter and one (1)
Receiver as well as an IR Emitter and an IR Sensor for remote control applications.
Applications
Applications include commercial and residential AV systems, classroom projector systems, digital
signage, boardroom systems, collaborative PC systems, Home Theatre, Showroom, and hard to
reach locations.
Installation
1. Identify the connectors on the Transmitter and Receiver as indicated on the product labels,
refer to the product diagram above.
2. Verify that the distance between the Transmitter and Receiver is within MuxLab
specifications (see Specifications table for more details). The Transmitter and Receiver form
a private wireless network between both units, and do not require a customer’s router based
wireless network to operate. Up to four Receivers may be paired with one Transmitter. Note:
The distance specification is for line of sight between TX & RX. Transmission through
walls is possible with reduced distance performance depending on wall construction.
For best performance avoid high density walls, such as concrete and metal walls, as they
may not allow the signal to be transmitted through them, and place the TX & RX away
from other interfering wireless devices.
3. To install the Transmitter:
3a. Connect the Transmitter HDMI-IN port to the HDMI video source with an HDMI
compliant cable.
3b. Connect the Transmitter HDMI-OUT port to the local HDMI display equipment
(optional) with an HDMI compliant cable.
4. To install the Receiver:
3a. Connect the Receiver HDMI-OUT port to the HDMI display equipment with an
Specyfikacje produktu
| Marka: | MuxLab |
| Kategoria: | Konwerter audio/wideo |
| Model: | 100503 |
Potrzebujesz pomocy?
Jeśli potrzebujesz pomocy z MuxLab 100503, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą
Instrukcje Konwerter audio/wideo MuxLab
21 Lutego 2025
20 Lutego 2025
20 Lutego 2025
20 Lutego 2025
20 Lutego 2025
20 Lutego 2025
20 Lutego 2025
7 Października 2024
5 Października 2024
1 Października 2024
Instrukcje Konwerter audio/wideo
- Cambridge
- PAC
- Blackmagic Design
- BZBGear
- Spatz
- Teac
- ATen
- Crestron
- Extron
- Energenie
- Comprehensive
- Decimator
- Hama
- Vogel's
- AudioControl
Najnowsze instrukcje dla Konwerter audio/wideo
7 Kwietnia 2025
3 Kwietnia 2025
2 Kwietnia 2025
2 Kwietnia 2025
1 Kwietnia 2025
1 Kwietnia 2025
1 Kwietnia 2025
29 Marca 2025
28 Marca 2025
26 Marca 2025