Instrukcja obsługi My Wall HL 40 ML
My Wall
Wandsteuna
HL 40 ML
Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla My Wall HL 40 ML (2 stron) w kategorii Wandsteuna. Ta instrukcja była pomocna dla 12 osób i została oceniona przez 6.5 użytkowników na średnio 3.5 gwiazdek
Strona 1/2
Upward Movement
Press the button, the TV mount will
move upward to the lowest-prole
position against the ceiling. Press the
OK button to stop the motion.
(Tips: Clear up all obstacles
within the range of motion.)
Memory Setting 1
Press the button for 1 second and you will hear a
beep, indicating that the current position
has been saved to memory.
Recall Memory
Press the button and the mount will
automatically get to the position saved
in the corresponding button mem1.
Recall Memory
Press the button and the mount will automa
-
tically get to the
position saved in the corresponding button
mem2.
Memory Setting 2
Press the button for 1 seconds and
you will hear a beep, indicating that
the current position has been saved
to memory.
Downward Movement
Press the button, the TV mount will move
downward to the maximum tilt angle position (75° by
default). Press the OK button to stop the motion.
(Tips: Clear up all obstacles within the range of motion.)
: Stop Button
OK
Manual mode
In any positlon (but the minimum position against the ceiling): when manually push up the TV ceiling mount over a distance,
the TV ceiling mount will automatically return back to the minimum position against the ceiling.
Never operate the unit without a TV installed!
Before power connection, be sure that bracket and the TV installed correctly.
Keep the children away from power.
!
RMT-02 remote control, 2x 7 AAA battery (not included)
HL 40 ML / HL 40 MWL
Reset the Tilt Range for Pitched Ceiling
The TV mount is 0° - 75° tilt adjustable by default for at ceiling. Please reset the tilt range if you use as a pitched ceiling TV mount.
Step 1: Reset the system (Instructions on Reset Mode)
Step 2: Press
Downward Movement, Upward Movement and OK buttons and adjust to the proper position.
Step 3: Press and hold the
Memory Setting 1 button until the unit beeps once. Repeat this step 5 times.
The unit will emit a long beep to indicate success.
Note: Step 1, 2 should be nished in 2 minutes, or it will fail to reset.
Coding of Remote Controller and Control Box
Step 1: When the mount is powered on, press the small button on the control box with a thin tool as shown.
The unit emits a beep, indicating that the control box is on standby for program coding.
Step 2: Press the SET button on the remote control, and the control box repeatedly beeps for approximate 10 seconds indicating that the
remote control is being programmed. The process will be nished automatically until you can‘t hear a beep any longer.
NOTE: The TV Mount can be matched with up to 20 remote controllers. To clean up the data of all the remote controllers, press and
hold the code matching button for 5 seconds then release. The unit will emits two beeps conrm the successful clean up and vice versa.
Reset Mode
If the TV mount can‘t be adjusted to the highest position(0° against the ceiling) or the lowest position (max. tilting position), unplug and
re-plug the power. Then press and hold the OK button for 5 seconds. Mount will retract to the highest position, that means the system has
been successfully reset.
Hereby, Transmedia Kabelverbindungen GmbH declares that the suspension brackets type HL 40 ML / HL 40 MWL
is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following
internet address: https://www.transmedia-germany.com/downloads/download/docs/CE_HL40MxL_1912301.pdf
Specyfikacje produktu
| Marka: | My Wall |
| Kategoria: | Wandsteuna |
| Model: | HL 40 ML |
Potrzebujesz pomocy?
Jeśli potrzebujesz pomocy z My Wall HL 40 ML, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą
Instrukcje Wandsteuna My Wall
12 Grudnia 2024
12 Grudnia 2024
9 Października 2024
5 Października 2024
5 Października 2024
5 Października 2024
5 Października 2024
5 Października 2024
5 Października 2024
5 Października 2024
Instrukcje Wandsteuna
- AV:link
- SIIG
- V7
- CGV
- Newstar
- NeoMounts
- Best Buy
- Middle Atlantic
- Goobay
- Bretford
- Crimson
- Smart-AVI
- Techly
- B-tech
- Mount-It!
Najnowsze instrukcje dla Wandsteuna
29 Stycznia 2025
28 Stycznia 2025
14 Stycznia 2025
8 Stycznia 2025
7 Stycznia 2025
5 Stycznia 2025
5 Stycznia 2025
4 Stycznia 2025
4 Stycznia 2025
3 Stycznia 2025