Instrukcja obsługi NEC NP1000

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla NEC NP1000 (9 stron) w kategorii Projektor. Ta instrukcja była pomocna dla 39 osób i została oceniona przez 7 użytkowników na średnio 4.7 gwiazdek

NEC Solutions (America), Inc.

Visual Systems Division

NP1000/2000 Installation Guide

Desktop and Ceiling Mount v 1.3

www.necvisualsystems.com NP1000/2000 Page 1 of 9

Contents

Product Description, Lens Specs, Screen/Aspect Ratio

Notes and Formulas _________________________________ Pg 1

Diagrams & Distance Charts; 4:3 _______ __ Pg 2

16:9___ Pg 3

Lens Shift Adjustable Range _______ __ Pg 4

Cabinet Dimensions_____________ ________ Pg 5

Lens Dimensions_______________ _______ Pg 6

Ceiling Mount Dimensions________ _______ Pg 7

Ceiling Mount Dimensions________ _______ Pg 8

Input Panel and Control Codes ______ Pg 9

Product Description

Type: 3 panel LCD projector, Dimensions: 15.7”(W) x 5.9”(H) x 14.1”(D)

0.8 p-Si TFT w/MLA Weight: 16.1 lbs

Resolution: 1024 x 768 (4:3) / 1024 x 576 (16:9) Brightness: NP1000 – 3500 ANSI Lumens

NP2000 – 4000 ANSI Lumens

Network Ready, integrated wired/optional wireless Manual: Lens Shift, Horizontal & Vertical /Zoom/ Focus

Lens Specifications

NP01FL: NP03FL:Throw Ratio: ~ 0.8:1 Focal Length: 13.2mm Throw Ratio:~1.94 - 3.07:1 Focal Length:31.6 – 50.2mm

Screen Sizes: 40”-150” F/#:2.3 Screen Sizes: 40” - 500” F/#:2.2 _____________

NP02FL: NP04FL:Throw Ratio: ~1.18 - 1.54:1 Focal Length: 19.42 - 25.26mm Throw Ratio:2.98 -4.77:1 Focal Length:48.8 - 77.6mm

Screen Sizes: 30” - 500” F/#:2.2 _________ Screen Sizes: 60” - 500” F/#:2.2____ _________ _

Standard:Throw Ratio:~1.5 - 2.0:1 Focal Length:24.4 - 32.5mm Throw Ratio:4.62 - 7.02:1 Focal Length:76.6 - 116.5mm NP05FL:

Screen Sizes: 30” – 500 ” F/#:1.7 Screen Sizes: 80” - 500” F/#:2.2

Screen/Aspect Ratio

Both 4:3 and 16:9 screens are fully supported with proper aspect ratio control for both type sources using NEC developed

scaling technology. Menu selections have settings for each screen type and aspect ratio control for each source type.

Notes

For screen sizes not indicated on the projection tables, use the formulas below.

If the figures on the tables do not match the results of formulas, use the figures in the table.

•All calculations are based on 4:3 aspect ratio.

•Distances are in inches, for millimeters multiply by 25.4.

• ±Distances may vary 5%.

Formulas

The Projection Formulas use the image width for calculation. Image width is the same for all aspect ratios, only vertical image size

varies. For proper projector placement, determine the image width for a desired screen size. Use the Screen Formulas below to

calculate all screen dimensions. Plug in the image width for “W” in the Projection Formulas.

Refer to the diagrams and charts for popular screen sizes on page 2 and 3:

Projection Formulas: Definitions:

NP01FL: C = 0.8325W – 1.33 W = Image Width

NP02ZL: C(Wide) = 1.2220W – 1.798 --------- C(Tele) = 1.5894W – 1.795 H = Image Height (size)

Standard: C(Wide) = 1.5455W – 2.022 --------- C(Tele) = 2.0555W – 2.015 C = Throw distance

NP03ZL: C(Wide) = 2.0069W – 2.830 --------- C(Tele) = 3.1710W – 2.840

NP04ZL: C(Wide) = 3.0537W – 4.830 --------- C(Tele) = 4.8860W – 4.850 4:3 Screen Formulas:

NP05ZL: C(Wide) = 4.8275W – 7.625 --------- C(Tele) = 7.3379W – 7.645 W = H x 4/3

H = W x 3/4

Diagonal = W x 5/4

16:9 Screen Formulas:

W = H x 16/9

Note:Tilting the front of the projector from level up or down by H = W x 9/16

more than 45° could reduce lamp life up to 20%. Screen Diagonal = W x 18.358/16

Specyfikacje produktu