Instrukcja obsługi NEC NP4100W

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla NEC NP4100W (9 stron) w kategorii Projektor. Ta instrukcja była pomocna dla 10 osób i została oceniona przez 3 użytkowników na średnio 4.8 gwiazdek

NEC Display Solutions of America, Inc.

NP4100 Installation Guide

Desktop and Ceiling Mount v 1.0

www.necdisplay.com NP4100 Page 1 of 9

Contents

Product Description, Lens Specs, Screen/Aspect Ratio

Notes and Formulas Pg 1

Diagrams & Distance Charts; 4:3 Pg 2

16:9 Pg 3

Lens Shift Adjustable Range Pg 4

Tilt Capabilities Pg 5

Cabinet Dimensions Pg 6

Lens Dimensions Pg 7

Ceiling Mount Dimensions Pg 8

Input Panel and Control Codes Pg 9

Product Description

Type: 1 chip DLP Projector Dimensions: 19.88” (W) x 8.23” (H) x” 15.16 (D)

0.7 DMD Weight: 38.6 lbs

Resolution: 1024 x 768 (4:3) / 1024 x 576 (16:9) Brightness: 6200 ANSI Lumens

Powered: Lens Shift, Horizontal & Vertical /Zoom/ Focus BTU’s: 2425 BTU/hour

Fan Noise: 38 dB / 34dB @ 1 meter Power Consumption: 710W (max)

Network Ready

Lens Specifications

NP06FL: NP09ZL:Throw Ratio: ~ 0.77:1 Focal Length: 11.4mm Throw Ratio: ~2.22 - 4.43:1 Focal Length: 32.0 – 63.0mm

Screen Sizes: 50”-200” F/#:2.0 Screen Sizes: 40” - 500” F/#:2.1 – 2.9

NP07ZL: NP10ZL:Throw Ratio: ~1.33 - 1.79:1 Focal Length: 19.3 - 25.8mm Throw Ratio: 4.43 -8.3:1 Focal Length: 48.8 - 77.6mm

Screen Sizes: 40” - 500” F/#:1.8 – 2.3 Screen Sizes: 40” - 500” F/#:2.2 – 3.1

NP08ZL:Throw Ratio: ~1.78 - 2.35:1 Focal Length: 26.0 - 34.0mm

Screen Sizes: 40” – 500 ” F/#:1.7 – 1.9

Screen/Aspect Ratio

Both 4:3 and 16:9 screens are fully supported with proper aspect ratio control for both type sources using NEC developed

scaling technology. Menu selections have aspect ratio control for each source type.

Notes

For screen sizes not indicated on the projection tables, use the formulas below.

If the figures on the tables do not match the results of formulas, use the figures in the table.

All calculations are based on 4:3 aspect ratio.

Distances are in inches, for millimeters multiply by 25.4.

 Distances may vary 5%.

Formulas

The Projection Formulas use the image width for calculation. Image width is the same for all aspect ratios, only vertical image size

varies. For proper projector placement, determine the image width for a desired screen size. Use the Screen Formulas below to

calculate all screen dimensions. Plug in the image width for “W” in the Projection Formulas.

Refer to the diagrams and charts for popular screen sizes on page 2 and 3:

Projection Formulas: Definitions:

NP06FL: C = 0.808W – 1.644 W = Image Width

NP07ZL: C(Wide) = 1.361W – 1.833 --------- C(Tele) = 1.831W – 1.800 H = Image Height (size)

NP08ZL: C(Wide) = 1.823W – 2.524 --------- C(Tele) = 2.403W – 2.447 C = Throw distance

NP09ZL: C(Wide) = 2.298W – 4.133 --------- C (Tele) = 4.579W – 4.226

NP10ZL: C(Wide) = 4.516W – 5.296 --------- C(Tele) = 8.514W – 5.512 4:3 Screen Formulas:

W = H x 4/3

H = W x 3/4

Diagonal = W x 5/4

16:9 Screen Formulas:

W = H x 16/9

Note:Tilting the front of the projector from level up or down by H = W x 9/16

more than 45° could reduce lamp life up to 20%. Screen Diagonal = W x 18.358/16

Specyfikacje produktu