Instrukcja obsługi Nedis ANOR5G10WT

Nedis nieskategoryzowany ANOR5G10WT

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Nedis ANOR5G10WT (2 stron) w kategorii nieskategoryzowany. Ta instrukcja była pomocna dla 35 osób i została oceniona przez 18 użytkowników na średnio 4.1 gwiazdek

Pobierz PDF

Strona 1/2

3G /4G LTE / 5G Outdoor External Antenna

ANOR5G10WT

INTRODUCTION

Thank you for choosing our 5G high gain directional external antenna. This antenna is designed to enhance the performance and signal strength of

your 5G-enabled devices. Please read this manual carefully before installing and using the antenna to ensure optimal performance. Compact and stylish

housing, it can be accompany with your cpe and sim card router or Cell Phone Signal Boosters.

Technical Specications:

• Covered Services: 3G / 4G / 4G LTE / 5G

• Frequency: 698 - 960 MHz /1710 - 2700 MHz / 3300 - 3600 MHz / 4800 - 5000 MHz

• Gain: 10 / 11 ± 1 dBi

• High Directionality

• Cable xed at antenna RG58U 1 ft N-type connector

• 4.0m LMR200 cable xed on the antenna with a SMA-male connector

• Anti-UV housing

• Pole installations method

PACKAGE CONTENT

Please check the content before your installation

1. Antenna x 1 pc

2. LMR 200 cable x 1 pc

3. Installation materials

4. Manual 1x

Installation

Step 1. Read this manual, ideally from start to nish, so that you understand the whole Installation process before you begin.

Step 2. Choose a suitable location for antenna installation with a clear line of sight to the 4G LTE or 5G cellular towers. Use the provided

mounting kit to secure the antenna. Ensure a stable and secure mount to prevent movement or damage. For optimal performance, it is

recommended to install the antenna outdoors.

Step 3. Locate a wooden pole or metallic pole where you would like to x the antenna.

Step 4. Fix the antenna to the pole by using the mounting material, then secure the antenna by tightening the U-Bolt with the buttery screws

Step 5. Connect the SMA-Male connector of the LMR200 coaxial cable on the antenna to the 4G or 5G device's antenna port. The

device could be a 4G LTE or 5G CPE (Customer Premises Equipment), SIM card router, or cell phone Singla Boosters. Ensure a secure

connection to minimize signal loss.

Step 6. Adjust the antenna direction for maximum signal strength. Use a compass or refer to your device's signal strength indicator to nd the

optimal direction. Gradually adjust the antenna angle and direction, checking the signal strength periodically. Ensure a secure and snug

connection to minimize signal loss.

Maintenance and Care:

Regularly inspect the antenna for any signs of damage, corrosion, or loose connections.

Troubleshooting:

If experiencing signal issues, recheck the antenna connection and directional alignment. Ensure there are no obstructions blocking the antenna's

line of sight to the cellular tower .

Compliance and Safety Guidelines:

Comply with local regulations and safety standards during installation.

Do not attempt to modify or disassemble the antenna.

Ensure that the installation location is safe and secure.

Thank you for choosing our 5G Outdoor Antenna. Enjoy enhanced 5G connectivity!

Nedis BV

De Tweeling 28, 5215 MC ’s-Hertogenbosch – The Netherlands

service@nedis.com

Specyfikacje produktu

Marka:	Nedis
Kategoria:	nieskategoryzowany
Model:	ANOR5G10WT
Kolor produktu:	Biały
Materiał obudowy:	Aluminium, Polyvinyl chloride (PVC)
Wysokość produktu:	210 mm
Szerokość produktu:	445 mm
Głębokość produktu:	70 mm
Waga produktu:	1250 g
Ilość na paczkę:	1 szt.
Pasmo częstotliwości:	0.698 - 5 GHz
Impedancja:	50 Ω
Rodzaj wtyku anteny:	SMA
Kod zharmonizowanego systemu (HS):	85177100
Poziom wzmocnienia anteny (max):	11 dBi
Współczynnik napięcia fali stojącej (VSRW):	2.5
Pozioma szerokość wiązki:	60 °
Pionowa szerokość wiązki:	50 °
Polaryzacja:	Polaryzacja liniowa
Maksymalna prędkość wiatru:	120 km/h