Instrukcja obsługi Netgear AXM765v2

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Netgear AXM765v2 (2 stron) w kategorii Niesklasyfikowane. Ta instrukcja była pomocna dla 15 osób i została oceniona przez 6 użytkowników na średnio 4.8 gwiazdek

Installation Guide

10GBASE-T SFP+ Module

Model AXM765v2

The AXM765v2 SFP+ module is a low-power, high-performance, 10GBASE-T transceiver.

The AXM765v2 delivers 10 Gb network connectivity with cabling up to 262.5 feet (80

meters) of Category 6a (Cat 6a) or Cat 7 Ethernet cable.

The module is compatible with the IEEE 802.3an standard.

The switch automatically detects the module, so you can simply plug it into an available

module slot. You can insert or remove the module while the switch is operational.

Install the Module

Insert the module rmly into a slot that supports the SFP+ interface. Make sure that

the cable you use is a higher-rated Ethernet cable (Cat 6a, or Cat 7). Supports links

up to 80m using Cat 6a/7 Cable.

Remove the Module

1. Lower the latch on the front of the module.

2. Grasp the sides of the module and pull it straight forward out of the slot.

Technical Specications

StandardsIEEE 802.3an, SFF-8431 and SFF-8432 MSA-compliant

Dimensions (H x W x D)0.54 in. x 0.54 in. x 2.71 in.

(13.8 mm x 13.7 mm x 68.8 mm)

Weight0.5 oz (14.17 g)

Operating temperature32–104ºF (0–40ºC)

Operative relative

humidity

85% at 77ºF (25ºC)

Operating distance10GBASE-T up to 262.5 ft (80 m) with Cat 6a (or

higher rated) Ethernet cable

Connectors RJ45

Power consumption2.5W

Safety certicationIEC/EN 60950-1, UL60950

Environmental complianceRoHS

Specyfikacje produktu