Instrukcja obsługi Nissin Di622 Mark II

Nissin lampa błyskowa Di622 Mark II

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Nissin Di622 Mark II (6 stron) w kategorii lampa błyskowa. Ta instrukcja była pomocna dla 5 osób i została oceniona przez 3 użytkowników na średnio 3.9 gwiazdek

Strona 1/6
for Canon EOS / Nikon digital SLR cameras
for Sony digital SLR cameras
INSTRUCTION MANUAL
Nissin Japan Ltd., Tokyo
http://www.nissin-japan.com
Nissin Marketing Ltd., Hong Kong
http://www.nissindigital.com
Nissin Di622 Mark II is designed for digital SLR cameras with hotshoe
and the latest TTL flash control technology.
Note: No film camera can be used with Di622 Mark II.
Attach Di622 Mark II to your camera, and then almost all jobs are
controlled by the camera for the most proper exposure.
Read this instruction manual and refer your canera owner’s manual to
enjoy flash photography.
The compatibility list of Di622 Mark II, please check at our official
website: www.nissindigital.com
WARNING
The flash unit contains high voltage electric parts. Do not try
to open or repair the flash unit. Return it back to the repair
service station or the store you bought it.
Do not touch the inside parts from the opening when the unit
was dropped and broken.
Do not fire the flash direct to the eye at short distance. It may
damage the eye. When taking flash picture especially
toward a baby, it is recommended to keep the flash unit at
least 1 meter (3.3feet) away from the subject.
Or use diffuser or bounce the light to the ceiling or to the wall
to soften its intensity.
Do not use the flash unit in the flammable gas, chemicals or
such liquids. It may cause fire or electric shock.
CAUTIONS
Do not leave or store the flash unit in the temperature over
40°C, such like in the automobile.
The flash unit is not water resistant. Keep the unit away from
rain, snow and humidity.
Do not use benzene, thinner or other alcoholic agents to
clean the unit.
Do not use this flash with the cameras which is not listed in
the compatibility list at our official website, otherwise it may
damage the camera’s circuitry.
Remove the batteries when not in use for a longer period of
time.
This sign refers the danger or serious damage.
This sign refers the damage or defect.
622II.Rev.0211.1.0
Design and Specifications are subject to change without prior notice.


Specyfikacje produktu

Marka: Nissin
Kategoria: lampa błyskowa
Model: Di622 Mark II
Kolor produktu: Czarny
Waga produktu: 315 g
Liczba kanałów: 1 kan.
Rodzaj baterii: AA
Liczba baterii: 4
Wymiary produktu (SxGxW): 74 x 103 x 134 mm
Szacunkowy czas recyklingu: 5 s
Szacunkowa liczba fleszy: 200 - 1500
Liczba szacunkowa (iso 100, ustawiona na 35 mm zoom): 44 m
Długość ogniskowa: 24 - 105 mm
Walizka: Tak
Pomocniczy promień przy Auto Focus (AF): Tak
Tryby lampy błyskowej: Manual, Slave
Połączenia bezprzewodowe: Tak
Pomoc przy ustawianiu lampy błyskowej: 62 m
Temperatura koloru: 5600 K
Regulacja pochylenia: Tak
Kompatybilność marek aparatu: Sony
Ustawienia grupowe: 1
Systemy lampy błyskowej zależne od marki: ADI/P-TTL (Sony)
Zasięg: 0.7 - 6 m

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Nissin Di622 Mark II, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje lampa błyskowa Nissin

Instrukcje lampa błyskowa

Najnowsze instrukcje dla lampa błyskowa

Impact

Impact Strobros Instrukcja

4 Października 2024
Vello

Vello OCS-C6 Instrukcja

25 Września 2024
Vello

Vello OCS-N Instrukcja

25 Września 2024
Vello

Vello OCS-OP3II Instrukcja

25 Września 2024
Vello

Vello OCS-P Instrukcja

25 Września 2024
Vello

Vello HSA-CSMSA Instrukcja

25 Września 2024
Godox

Godox DPIIIV Series Instrukcja

19 Września 2024
FoxFury

FoxFury Rugo 2 Instrukcja

16 Września 2024