Instrukcja obsługi NUVO Decker 60/4642

NUVO Ulga Decker 60/4642

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla NUVO Decker 60/4642 (2 stron) w kategorii Ulga. Ta instrukcja była pomocna dla 29 osób i została oceniona przez 15 użytkowników na średnio 4.3 gwiazdek

Strona 1/2
ASSEMBLY INSTRUCTION
SKU#60/4542, 60/4642
NOTE: Please consult a qualied electrician if you are not certain of the installation or service.
CAUTION: Before starting the installation or service, disconnect the power by turning o the circuit
breaker or by removing the fuse at the fuse box.
1. Carefully unpack the xture, lay out all parts on a clean surface.
2. Fasten the cross bar onto the outlet box by using provided 2 outlet box screws.
3. Tie ground wire from outlet box and from xture to the ground screw on the cross bar. Connect white wire
(live wire) from supply circuit. Cover connections using provided wire connectors.
4. Place the xture body to the wall by aligning the protruding mounting screws all the way through the wall
plate and tighten lock nuts to the mounting screws until the xture body is held rmly against the wall.
5. Unscrew the socket rings and socket covers from the sockets. Place the shade A and shade B and socket
covers over the sockets, refasten the socket rings to secure them.
6. Install the bulbs ot included). (N
7. Turn on the power. This xture can be installed as an up-light or down-light position. a
A Satco Product


Specyfikacje produktu

Marka: NUVO
Kategoria: Ulga
Model: Decker 60/4642

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z NUVO Decker 60/4642, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą