Instrukcja obsługi OptiTrack CinePuck
OptiTrack
Nie skategoryzowane
CinePuck
Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla OptiTrack CinePuck (4 stron) w kategorii Nie skategoryzowane. Ta instrukcja była pomocna dla 8 osób i została oceniona przez 4.5 użytkowników na średnio 4.6 gwiazdek
Strona 1/4
CinePuck CNP0010
CinePuck
This page provides specicaons and addional informaon for the CinePuck.
The CinePuck is designed specically for Virtual Producon or Broadcast studios. For more informaon on how to use
the CinePuck for Virtual Producon, please visit the Virtual Producon secon of this documentaon.
Acve Markers
LED Specicaons
The following specicaons apply for acve IR LEDs on the CinePuck:
850 nm IR spectrum
8 LEDs
Illuminaons synchronized with camera exposures
Illuminaon angle: ±60°
Basic Specs
Spec
Descripon
CinePuck Body
Dimensions
Dimensions
Width: 153.30mm (~6.04”)
Length: 127.68mm(~5.03”)
Height: 25.70(~1.01”)
Weight
11.58 oz (~328.29g)
Aachment
x1 ARRI
-
Style An
-
Twist Mount w/ 3/8"
-
16 threads
x6 Standard Tripod Mounts w/ 1/4"-20 threads
Baery
2200mAh Lithium polymer baery
Charging
5V micro USB Type C
~7.5 hours* of baery life (*Baery life varies depending on frame rate and exposure
sengs)
5hrs zero to full charge
IMU
Dimensions
Width: 15mm
Spec
Descripon
Length: 15mm
Height: 5.720mm
Weight
< 1.75g
Gyroscope
Dynamic Range
500 +/- °/sec
BaseStaon Load Capacity
The number of devices with IMUs (such as CinePucks) that can aach to a BaseStaon is determined by the system
frame rate and the divisor applied to the BaseStaon. The table below shows the IMU maximum for common frame
rates with a divisor rate of 1, 2, and in some cases 3.
FrameRate
Divisor Rate 1
Divisor Rate 2
Divisor Rate 3
60
26
54
83
70
22
47
71
80
19
39
62
90
16
36
54
100
14
32
49
110
13
29
44
120
11
26
40
130
10
24
140
9
22
34
150
9
20
160
8
19
30
170
7
17
180
7
16
26
190
6
15
200
6
14
23
210
5
14
220
5
13
21
230
5
12
240
4
11
18
250
4
11
As noted, the table does not include all possible frame rate and divisor combinaons. If you are familiar with using Tera
Term or , you can determine the maximum number of IMUs for any specic frame rate and divisor combinaon
PuTTy
not shown on the table.
1. Use PuTTy to change the divisor rate on the BaseStaon.
2. Connect an IMU puck to PuTTy.
3. Aempt to set the ID of the puck to an unrealiscally high value. This triggers a warning that includes the
current number of slots available for the given frame rate.
4. Set the IMU puck ID to the highest available slot for the frame rate and conrm that it appears in Move.
5. BaseStations have 16 radio frequency (RF) channels available for use (11-26).
When adding more than one BaseStation to a system, the IMU count is simply the
maximum number of IMUs multiplied by the number of BaseStations (up to 16). For
example, in a system with 4 BaseStations running at 90Hz and a divisor rate of 3,
the number of allowable IMUs would be 216 (54*4=216).
6. CinePuck in Motive
7. To use a CinePuck in Motive, it must first be an asset. Please see the Builder pane
page for instructions on creating a rigid body asset IMU Sensor , and the page
Fusion for instruction on pairing the IMU.
8. Use the feature to automatically pair and align a CinePuck to its Auto-Configure
associated IMU. When auto-configured, Motive changes the name of the Rigid Body
and its associated marker constraints to CinePuck_G###.
9. To use a different naming convention, use the Manual Pair option instead.
10. Once the CinePuck rigid body is created, it will be available in the Assets
pane. Select the CinePuck either in the Assets pane or the 3D Viewport to display
its properties in the Properties pane.
11.
12. CinePuck in the Assets pane (left) and the Properties pane (right).
13. When connected to the OptiTrack system, the properties for the CinePuck
IMU and its associated BaseStation are shown in the Devices Pane. Please see the
Devices Pane page for more details.
Specyfikacje produktu
| Marka: | OptiTrack |
| Kategoria: | Nie skategoryzowane |
| Model: | CinePuck |
Potrzebujesz pomocy?
Jeśli potrzebujesz pomocy z OptiTrack CinePuck, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą
Instrukcje Nie skategoryzowane OptiTrack
7 Lutego 2025
31 Stycznia 2025
Instrukcje Nie skategoryzowane
- Nie skategoryzowane Leviton
- Nie skategoryzowane Honor
- Nie skategoryzowane Petkit
- Nie skategoryzowane Behringer
- Nie skategoryzowane Planet Audio
- Nie skategoryzowane Martin Audio
- Nie skategoryzowane Smart-AVI
- Nie skategoryzowane Logitech
- Nie skategoryzowane Comprehensive
- Nie skategoryzowane Therm-a-Rest
- Nie skategoryzowane Worx
- Nie skategoryzowane Hotone
- Nie skategoryzowane Metronic
- Nie skategoryzowane Xblitz
- Nie skategoryzowane Legrand
Najnowsze instrukcje dla Nie skategoryzowane
9 Kwietnia 2025
9 Kwietnia 2025
9 Kwietnia 2025
9 Kwietnia 2025
9 Kwietnia 2025
9 Kwietnia 2025
9 Kwietnia 2025
9 Kwietnia 2025
9 Kwietnia 2025
9 Kwietnia 2025